- Joined
- Jul 30, 2007
- Messages
- 4 (0.00/day)
- Location
- Poland
| System Name | harmonix emiter |
|---|---|
| Processor | Intel Q6600(rev.G0)@3gHz@1.224v |
| Motherboard | Asus P5Q-E |
| Cooling | Scythe Ninja 2 |
| Memory | OCZ 2x 2GB DDR2 1066MHz Reaper |
| Video Card(s) | Sapphire Radeon 5770 vapor-x @ 960/1275 stock volt |
| Storage | 2 X WD5001AALS |
| Display(s) | 2 x 17" Samsung SyncMaster 770P |
| Case | CoolerMaster Centurion 590 Black |
| Audio Device(s) | EMU - 0404 |
| Power Supply | Be-quiet Dark Power P7-PRO-550W |
| Software | vista ultimate 64bit |
is there any way, to link more then one card in the ccc ( i.e. not only 3d application settings, but 3d application settings and creating and arranging desktops and amd overdrive settings) i just installed newer drivers (cat. 11.2, previous was 10.8) and my ccc profiles not work properly. Now to swap from one monitor, anisotropic filtering and anti-aliasing settings, to two monitor and different af and aa setting i must change everything by choosing more then one profile.