- Joined
- Dec 21, 2007
- Messages
- 2,668 (0.45/day)
- Location
- Earth
FOR SALE BY SystemViper.
Heat in Sig, over 70+ Positives
Payment - Paypal, NO E-CHECKS
Shipping USPS Priority, Unless otherwise agreed apon.
SUPER SUNDAY SALE
PURCHASE BOTH SETS OF CellShock DDR3 Micron D9JN PC3-15000 1866MHz (8-8-8-16) Blue Dual Channel kit (Micron D9JNL) eACH SET IS 2 X 1G
BOTH SETS FOR $225.00 TODAY ONLY
FOR Sale:2 Sets of 2GB CellShock DDR3 Micron D9JN PC3-15000 1866MHz (8-8-8-16) Blue Dual Channel kit (Micron D9JNL)
This is for 3 Sets of CellShock DDR3 Micron D9JN PC3-15000 1866MHz (8-8-8-16) Blue Dual Channel kit (Micron D9JNL)
6 X 1G
These kits sold for $230.00 EACH, 6 months ago and are still very hard to find.
SALE
1866MHz DDR3 memory kit from CellShock. PC3-15000 memory consisting of 2x 1GB modules. Timings of 8-8-8-16 at 1.7V-2.0V. Built using Micron D9JNL chips, which guarantees superb performance.
These kits are equipped with the brand new Blue heatsinks from CellShock.
Specifications from CellShock:
This is the top of the line CellShock memory and is targeted at enthusiasts and high end gamers. These memory Kits are based on very best chips, which enables it to run at notably higher speeds or more aggressive timings than its official specification. The 1866 kits have been tested on several platforms based on Intel P35/X38/X48 and Nvidia 790 Chipsets and achieve memory speeds beyond 1900 MHz with 888 timings and 1800 MHz with 777 timings. This additional overclocking headroom enables users to push their memory and their cpu and mainboards to the limit, achieving new performance heights. While working closely with enthusiasts, hardware experts, mainboard manufacturers and reviewers around the world, we came to the conclusion that the fastest possible 24/7 System configuration that can be achieved is an FSB of 466Mhz with a memory speed of 1866Mhz with a tRD (performance level) of 6. This configuration is possible with all High End CPUs, even Intel QuadCore processors, and High End Mainboards with moderate voltage levels. The 1866 Kits are equipped with our well known massive Aluminium Heatspreaders, this time in a beautiful metallic-blue and silver combination, and instead of thick thermal pads thermal grease is used to ensure optimum cooling.
Capacity:
2GB-Kit (2x1GB)
Config:
128Mx64
DRAM:
Micron
Device Config:
128Mx8
PCB:
240pin
Module Info:
unbuffered, Non-ECC, DDR3 DIMM
Speed:
PC15000
Cas Latency:
8-8-8-16
VDIMM :
1,7V – 2,0V
Warranty:
5 years
'
'
'
'
---------------------------------------------------------------
For Sale EK-Mosfet 790i Water Block - Acetal & EK-Mosfet 790i Water Block Part 2 - Acetal
These are the Mosfit blocks for...
Water Block for EVGA 790i Mosfets.
Supported motherboards:
- EVGA nForce 790i SLI A1
- XFX 790i LT nForce 680i LT
Both Blocks $60.00 Delivered CONUS
'
'
'
'
Have lots of other pumps, radiators, waterblocks and almost anything you might need. IM me your requests.
.
.
.
.
Heat in Sig, over 70+ Positives
Payment - Paypal, NO E-CHECKS
Shipping USPS Priority, Unless otherwise agreed apon.
SUPER SUNDAY SALE
PURCHASE BOTH SETS OF CellShock DDR3 Micron D9JN PC3-15000 1866MHz (8-8-8-16) Blue Dual Channel kit (Micron D9JNL) eACH SET IS 2 X 1G
BOTH SETS FOR $225.00 TODAY ONLY
FOR Sale:2 Sets of 2GB CellShock DDR3 Micron D9JN PC3-15000 1866MHz (8-8-8-16) Blue Dual Channel kit (Micron D9JNL)
This is for 3 Sets of CellShock DDR3 Micron D9JN PC3-15000 1866MHz (8-8-8-16) Blue Dual Channel kit (Micron D9JNL)
6 X 1G
These kits sold for $230.00 EACH, 6 months ago and are still very hard to find.
SALE
1866MHz DDR3 memory kit from CellShock. PC3-15000 memory consisting of 2x 1GB modules. Timings of 8-8-8-16 at 1.7V-2.0V. Built using Micron D9JNL chips, which guarantees superb performance.
These kits are equipped with the brand new Blue heatsinks from CellShock.
Specifications from CellShock:
This is the top of the line CellShock memory and is targeted at enthusiasts and high end gamers. These memory Kits are based on very best chips, which enables it to run at notably higher speeds or more aggressive timings than its official specification. The 1866 kits have been tested on several platforms based on Intel P35/X38/X48 and Nvidia 790 Chipsets and achieve memory speeds beyond 1900 MHz with 888 timings and 1800 MHz with 777 timings. This additional overclocking headroom enables users to push their memory and their cpu and mainboards to the limit, achieving new performance heights. While working closely with enthusiasts, hardware experts, mainboard manufacturers and reviewers around the world, we came to the conclusion that the fastest possible 24/7 System configuration that can be achieved is an FSB of 466Mhz with a memory speed of 1866Mhz with a tRD (performance level) of 6. This configuration is possible with all High End CPUs, even Intel QuadCore processors, and High End Mainboards with moderate voltage levels. The 1866 Kits are equipped with our well known massive Aluminium Heatspreaders, this time in a beautiful metallic-blue and silver combination, and instead of thick thermal pads thermal grease is used to ensure optimum cooling.
Capacity:
2GB-Kit (2x1GB)
Config:
128Mx64
DRAM:
Micron
Device Config:
128Mx8
PCB:
240pin
Module Info:
unbuffered, Non-ECC, DDR3 DIMM
Speed:
PC15000
Cas Latency:
8-8-8-16
VDIMM :
1,7V – 2,0V
Warranty:
5 years
'
'
'
'
---------------------------------------------------------------
For Sale EK-Mosfet 790i Water Block - Acetal & EK-Mosfet 790i Water Block Part 2 - Acetal
These are the Mosfit blocks for...
Water Block for EVGA 790i Mosfets.
Supported motherboards:
- EVGA nForce 790i SLI A1
- XFX 790i LT nForce 680i LT
Both Blocks $60.00 Delivered CONUS
'
'
'
'
Have lots of other pumps, radiators, waterblocks and almost anything you might need. IM me your requests.
.
.
.
.
Last edited:
I'll pm you when I have the funds to make an offer.
