ibhappy
New Member
- Joined
- Dec 31, 2010
- Messages
- 103 (0.02/day)
Processor | Intel Pentium E6300 Wolfdale |
---|---|
Motherboard | EP45-UD3R v1.1 |
Memory | CORSAIR XMS2 8GB |
Video Card(s) | HD Radeon 4850 |
Storage | Western Digital Caviar Black WD5001AALS 500GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive |
Case | Antec Nine Hundred |
Audio Device(s) | xtremegamer |
Power Supply | 650W Antec |
I replaced an E6300 with a Q9650 on my Gigabyte EP45-UD3R board.
It wouldn't start with the new CPU, so I removed the battery on the mobo to reset the CMOS.
Still wouldn't start.
I replaced the CPU with the old CPU and it booted fine.
What do I do now to get the computer to start with the Q9650?
Thanks!
It wouldn't start with the new CPU, so I removed the battery on the mobo to reset the CMOS.
Still wouldn't start.
I replaced the CPU with the old CPU and it booted fine.
What do I do now to get the computer to start with the Q9650?
Thanks!