Club 3D are proud to announce the world's first Multi Stream Transport (MST) Hub. This practical device is probably the most budget friendly way to add more display devices to existing desktop or mobile systems fitted with a DisplayPort (DP) output. Display devices have always been an integral part of the PC experience. Whether it is in the form of a desktop monitor, a notebook's embedded panel, or the touch screen of a PC tablet, display devices play a vital role in defining the user's visual experience. Connecting more display devices to existing systems has become increasingly more important. Whether it is for home use, allowing different display devices showing different applications or multimedia, more display devices means more possibilities. Or for corporate use, allowing the productivity per work station to increase drastically if more display devices can be used. How does it work? Simply put, the MST Hub uses the extreme high bandwith signal from a DisplayPort 1.2 output and splits this signal to three separate signals with own DisplayPort outputs. This offers the possibility to quickly and easily add up to 3 VGA, DVI, HDMI or DP display devices to your set-up. The display devices can be connected using passive adapters. Product Features Standards compliance/support: Displayport v1.2, displayport v1.1a,VESA DDM Standard, HDCP V2.0, DisplayID, and EDID v1.4 Supports main link rates of 5.4 Gbps (HBR2), 2.7 Gbps (HBR), and 1.62 Gbps(RBR) from source Supports 1/2/4 lanes of main link for RX side Supports three DP++ output port,or two dual-link DVI ports,or the combination of ports For DP 1.2 source,supports DP1.2 MST multi video/audio steams Supports 1.1 source,supports ViewXpand Supports DP-DP Bypass mode Supports AUX-CH enables SBM and I2C mapping over AUX between the source/sink and device Dedicated I2C slave for main processor to access the device Supported output resolution:up to 2560 x 1600 @60 Hz each monitor in DP 1.2 MST and up to FHD/1080p in DP 1.1 or DP 1.2 SST Input pixel data depth 6/8/10/12 bits and supports output pixel format RGB444 For more information, visit the product page.