- Joined
- Dec 16, 2021
- Messages
- 525 (0.40/day)
- Location
- Denmark
| Processor | AMD Ryzen 7 3800X |
|---|---|
| Motherboard | ASUS Prime X470-Pro |
| Cooling | bequiet! Dark Rock Slim |
| Memory | 64 GB ECC DDR4 2666 MHz (Samsung M391A2K43BB1-CTD) |
| Video Card(s) | eVGA GTX 1080 SC Gaming, 8 GB |
| Storage | 1 TB Samsung 970 EVO Plus, 1 TB Samsung 850 EVO, 4 TB Lexar NM790, 12 TB WD HDDs |
| Display(s) | Acer Predator XB271HU |
| Case | Corsair Obsidian 550D |
| Audio Device(s) | Creative X-Fi Fatal1ty |
| Power Supply | Seasonic X-Series 560W |
| Mouse | Logitech G502 |
| Keyboard | Glorious GMMK |
Hey guys
First off, not sure if this should go here or in the cooling section. Feel free to move.
I've hit a snag with my apparently unending new PC build. I've bought the Corsair LX140 starter set with two fans and the iCue Link thingy. I like the fans, although personally I would've preferred non-RGB ones. The system for connecting multiple fans is pretty ingenious. However, it turns out that the intake fan mounts are dimensioned in such a way that I cannot attach the cable to the top or the bottom of the fans. Even mounting the fans indiviually sideways doesn't really work properly, because of the very limited space there is for the cables. It seems as if no one thought of the possibility that the fan cable wouldn't go out the front (or back) of the fan.
If anyone has any suggestions I'd like to hear them. Also, how would I best contact Corsair? They've been quite helpful in the past. No idea if they still are and it doesn't seem to be easy to contact them by e.g. mail. I don't have any "favourite" social media accounts, which they refer to on their site.
First off, not sure if this should go here or in the cooling section. Feel free to move.
I've hit a snag with my apparently unending new PC build. I've bought the Corsair LX140 starter set with two fans and the iCue Link thingy. I like the fans, although personally I would've preferred non-RGB ones. The system for connecting multiple fans is pretty ingenious. However, it turns out that the intake fan mounts are dimensioned in such a way that I cannot attach the cable to the top or the bottom of the fans. Even mounting the fans indiviually sideways doesn't really work properly, because of the very limited space there is for the cables. It seems as if no one thought of the possibility that the fan cable wouldn't go out the front (or back) of the fan.
If anyone has any suggestions I'd like to hear them. Also, how would I best contact Corsair? They've been quite helpful in the past. No idea if they still are and it doesn't seem to be easy to contact them by e.g. mail. I don't have any "favourite" social media accounts, which they refer to on their site.