- Joined
- Mar 22, 2008
- Messages
- 580 (0.10/day)
System Name | X-Class MKII |
---|---|
Processor | Intel Core i7-6950X Extreme Edition 4.60GHz 25MB Cache 14nm LGA2011-3 Broadwell-E 10-Core Processor |
Motherboard | EVGA Intel X99 Classified Dual Quad-Channel DDR4 Socket LGA2011-3 E-ATX Motherboard on BIOS v2.09 |
Cooling | BP Summit M CPU WB/BP EVGA K|NGP|N FCWB/Nemesis 480GTR/Nemesis 560GTR/MMRS 150mm/Swiftech MCP655 |
Memory | Corsair Dominator Platinum 128GB (8×16GB) @ 2800MHz 14-16-16-36 DDR4 PC4-22400 Memory Kit |
Video Card(s) | EVGA nVidia GeForce GTX 1080 Ti K|NGP|N 2139MHz 11264MB @ 12992MHz GDDR5X Video Cards in 2-Way SLI |
Storage | Samsung 970 PRO M.2 1TB NVMe V-NAND SSD on AquaComputer kryoM.2 PCIe 3.0 ×4 M.2 Adapter |
Display(s) | LG 34GN850-B 34” UltraGear 21:9 WQHD Nano IPS 1ms 144Hz HDR Gaming Monitor |
Case | CaseLabs MAGNUM SMA8 Gunmetal Single Wide Full-Tower Chassis with Custom Smoke Window Panel |
Audio Device(s) | Creative Sound Core3D On-Board 5.1 Surround Sound Quad-Core Audio Processor |
Power Supply | Corsair Professional Series AX1500i 1500-Watt 80+ TITANIUM Fully-Modular Digital Power Supply Unit |
Mouse | Logitech G502 PROTEUS SPECTRUM Core 200-12000DPI Laser Gaming Mouse |
Keyboard | Logitech G19 Gaming Keyboard with Full Color GamePanel LCD |
Software | Microsoft Windows 10 Professional 64-bit |
Has anyone on here purchased one of Corsair's Individually Sleeved Cable Kits for the AX1200? If so, could you please post a pic showing both connector ends of one of the PCI-E cables showing both sides of each connector?
I'm currently in the process of individually sleeving my AX1200 modular cables myself, but I noticed that on the 6+2 PCI-E cables that the +2 portion are both crimped into 1 connector pin that goes towards the AX1200. But I also noticed on the 8-pin connector that goes to the AX1200 that there's an available slot to put another connector pin. Would I be able to separate the +2 portion of the PCI-E cables and have each one individual by crimping another connector pin on the other wire and putting it in the available slot on the connector housing for the AX1200. Minding that I decide by which pin goes where by judging the current layout of the 6 pins?
I'm currently in the process of individually sleeving my AX1200 modular cables myself, but I noticed that on the 6+2 PCI-E cables that the +2 portion are both crimped into 1 connector pin that goes towards the AX1200. But I also noticed on the 8-pin connector that goes to the AX1200 that there's an available slot to put another connector pin. Would I be able to separate the +2 portion of the PCI-E cables and have each one individual by crimping another connector pin on the other wire and putting it in the available slot on the connector housing for the AX1200. Minding that I decide by which pin goes where by judging the current layout of the 6 pins?