- Joined
- Jul 28, 2008
- Messages
- 3,300 (0.57/day)
System Name | Primary|Secondary|Poweredge r410|Dell XPS|SteamDeck |
---|---|
Processor | i7 11700k|i7 9700k|2 x E5620 |i5 5500U|Zen 2 4c/8t |
Memory | 32GB DDR4|16GB DDR4|16GB DDR4|32GB ECC DDR3|8GB DDR4|16GB LPDDR5 |
Video Card(s) | RX 7800xt|RX 6700xt |On-Board|On-Board|8 RDNA 2 CUs |
Storage | 2TB m.2|512GB SSD+1TB SSD|2x256GBSSD 2x2TBGB|256GB sata|512GB nvme |
Display(s) | 50" 4k TV | Dell 27" |22" |3.3"|7" |
VR HMD | Samsung Odyssey+ | Oculus Quest 2 |
Software | Windows 11 Pro|Windows 10 Pro|Windows 10 Home| Server 2012 r2|Windows 10 Pro |
I just got the PiMax 4k, installed the PiPlay and played Project Cars a bit and I have a couple questions.
The headset it's a bit dim, I see there is an option to increase the Brightness under Settings in PiPlay but it doesn't affect the brightness on the headset.
Also how do I increase the resolution, the headset has 4k screen but the in game resolution it only goes to 1080p.
I have a theory that might be because I have a 1080p monitor and the headset is set to disconnected in display settings so that might be the reason why I can't go higher.
I might have to set the headset to primary and run the game that way and maybe I can go higher in resolution.
I don't know if that holds water or not, I have to test that.
If there is another way please let me know.
Also when I run Project cars 2 the SteamVR kicks in even if I run the game from PiPlay, so I don't know if that's why the settings i PiMax don't apply.
So do I need SteamVR or I can just run games out of PiPlay ?
This VR stuff is confusing to me to be honest.
Any help would be appreciated.
Thanks!
The headset it's a bit dim, I see there is an option to increase the Brightness under Settings in PiPlay but it doesn't affect the brightness on the headset.
Also how do I increase the resolution, the headset has 4k screen but the in game resolution it only goes to 1080p.
I have a theory that might be because I have a 1080p monitor and the headset is set to disconnected in display settings so that might be the reason why I can't go higher.
I might have to set the headset to primary and run the game that way and maybe I can go higher in resolution.
I don't know if that holds water or not, I have to test that.
If there is another way please let me know.
Also when I run Project cars 2 the SteamVR kicks in even if I run the game from PiPlay, so I don't know if that's why the settings i PiMax don't apply.
So do I need SteamVR or I can just run games out of PiPlay ?
This VR stuff is confusing to me to be honest.
Any help would be appreciated.
Thanks!