CPU Core Temps is Different Solution?

[Januka.OC]

CPU Core Temps is different?

Most of the times, under full load
My Core temps like this:

Core 2 temps *72c - 76c* never reach 80c.

Core 3 temps *73c - 77c* never reach 80c.

Core 4 temps *77c - 81c* sometimes down to 69c 75c but moat time, 77c - 81c

Core 5 temps *75c - 79c* reach 80c sometimes


My Question is,
This ia usual thing or not?
Any solution for this?

Check this photos..
I try to upload 15 sec videos but can't.
Its better we can upload video here.

 

[DRDNA]

this is normal and the only solution is delid re paste (as long as it is not a soldered CPU) and not worth it unless you are an extreme bencher overclocker.

EDIT your differences are actually better than most other peoples. aLSO KEEP IN MIND THAT SOME SOFTWARE HITS THE CORES DIFFERENTLY AND THAT ALSO AFFECTS THE CORES TEMPS (opps damn caps lock) but only some software and i have found most use cores equally but still worth mentioning.
Welcome to TPU

 

[John Naylor]

A 10C range between lowest and highest is not unusual.

But that depends on what you using to create load (RoG Real Bench recommended) and to a much lesser extent what you are using to monitor (HWiNFO recommended).

 

[Januka.OC]

this is normal and the only solution is delid re paste (as long as it is not a soldered CPU) and not worth it unless you are an extreme bencher overclocker.

EDIT your differences are actually better than most other peoples.
Welcome to TPU

I already Delid and use TG Conductonaut,
Inside and outside both.

Is there any other way to cool this down?
a little bit?

I have i7 7700k with H115i corsair Liquid Cooler.

if you know any other way low temperature please tell me how.

And thanks for replying

 

[dorsetknob]

this is normal and the only solution is delid re paste (as long as it is not a soldered CPU) and not worth it unless you are an extreme bencher overclocker.
your differences are actually better than most other peoples

The O/S Schedules different tasks over a number of cores ( depending how many you have and if HT is Available ) this means different cores have Different work loads and so your get a temp Variation
Its nothing really to worry about

 

[DRDNA]

I already Delid and use TG Conductonaut,
Inside and outside both.

Is there any other way to cool this down?
a little bit?

I have i7 7700k with H115i corsair Liquid Cooler.

if you know any other way low temperature please tell me how.

And thanks for replying

What is the PC room's ambient temperatures?

 

[Januka.OC]

A 10C range between lowest and highest is not unusual.

But that depends on what you using to create load (RoG Real Bench recommended) and to a much lesser extent what you are using to monitor (HWiNFO recommended).

Actually this is not Benchmarking or Stress testing. This is my Encoding....

I figured my limit and all Test are finished.
No test anymore just monitoring..

What is the PC rooms ambient temperatures?

30c 35c i don't know i don't have any device to check that. Without XMO my idle is 35c eith xmo idle is 40c btn 45c

 

[DRDNA]

but i can say most "Encoding" will not hit cores exactly the same.

30c 35c i don't know i don't have any device to check that. Without XMO my idle is 35c eith xmo idle is 40c btn 45c

HELLS YES your temperatures are GREAT at them Room temps! NICE! If your room is upto 95 degrees Fahrenheit then that's really good temps with that cooler!

 

[The_DriverX]

Just to chime in, their can be slight imperfections (no two CPUs, or anything for that manner, is exactly the same). But, as far as a straight answer to your question... Yes, this is common in multi-core CPUs. As long as the temperatures aren't extremely different per core.

 

[DRDNA]

I already Delid and use TG Conductonaut,
Inside and outside both.

Is there any other way to cool this down?
a little bit?

I have i7 7700k with H115i corsair Liquid Cooler.

if you know any other way low temperature please tell me how.

And thanks for replying

The only thing left really is stronger faster rad fans or cooling the room.

 

[Januka.OC]

but i can say most "Encoding" will not hit cores exactly the same.



HELLS YES your temperatures are GREAT at them Room temps! NICE! If your room is upto 95 degrees Fahrenheit then that's really good temps with that cooler!

Yes my room cool at night. Room in normal temperature sometimes it's cooler then usual, daytime is usually temperature nights time is cooler.

When it's come to Encoding, CPU is the main thing that need not like a game.
So for encoding XMP is really doesn't matter right?

 

[DRDNA]

Yes my room cool at night. Room in normal temperature sometimes it's cooler then usual, daytime is usually temperature nights time is cooler.

When it's come to Encoding, CPU is the main thing that need not like a game.
So for encoding XMP is really doesn't matter right?

Probably not. But if you are handy you could possibly undervolt at same cpu speeds to even further temperature optimization.

 

[Januka.OC]

I got my answer thanks.
Please close this!!

 

[DRDNA]

I got my answer thanks.
Please close this!!

SUper happy to hear all is well and I hope to see you around the forums as you sound like an advanced user and that's always helpful!

 

[Januka.OC]

SUper happy to hear all is well and I hope to see you around the forums as you sound like an advanced user and that's always helpful!

Yes thanks to you. And all other who reply me.. Im new and i like this TECHPOWERUP cause fast replay. There's some other guy's i don't likw they don't help at all and i reports one with bad word hahaha.

 

[Kursah]

I got my answer thanks.
Please close this!!

Glad to hear you got your answer.

I'll go ahead and close up shop.