• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

CPU stuck to the cooler? - Solved

HTC

Joined
Apr 1, 2008
Messages
4,601 (0.79/day)
Location
Portugal
System Name HTC's System
Processor Ryzen 5 2600X
Motherboard Asrock Taichi X370
Cooling NH-C14, with the AM4 mounting kit
Memory G.Skill Kit 16GB DDR4 F4 - 3200 C16D - 16 GTZB
Video Card(s) Sapphire Nitro+ Radeon RX 480 OC 4 GB
Storage 1 Samsung NVMe 960 EVO 250 GB + 1 3.5" Seagate IronWolf Pro 6TB 7200RPM 256MB SATA III
Display(s) LG 27UD58
Case Fractal Design Define R6 USB-C
Audio Device(s) Onboard
Power Supply Corsair TX 850M 80+ Gold
Mouse Razer Deathadder Elite
Software Ubuntu 19.04 LTS
Got myself an AM4 mounting kit for my NH-C14 cooler and finally proceeded to pull the board out to swap the stock cooler ... but the cooler was firmly stuck, even with the screws taken off, which i found quite odd.

Applied a little more force and, to my disbelief, the CPU got yanked right out of the socked (which was locked, obviously) and it's still stuck to the cooler.

Several concerns:

1 - did i damage the board?
2 - did i damage the CPU?
3 - how do i unstuck the CPU from the cooler?

There don't appear to be any bent pins on the CPU.

I've removed many coolers (replaced TIMs and / or CPUs) but this is the 1st time this has happened to me and, frankly, i'm concerned i've borked my new AM4 system :(

Help?

EDIT

#3 is fixed already: managed to separate the cooler from the CPU.
 
Last edited:
Joined
Feb 19, 2006
Messages
6,270 (0.95/day)
Location
New York
Processor INTEL CORE I9-9900K @ 5Ghz all core 4.7Ghz Cache @1.305 volts
Motherboard ASUS PRIME Z390-P ATX
Cooling CORSAIR HYDRO H150I PRO RGB 360MM 6x120mm fans push pull
Memory CRUCIAL BALLISTIX 3000Mhz 4x8 32gb @ 4000Mhz
Video Card(s) EVGA GEFORECE RTX 2080 SUPER XC HYBRID GAMING
Storage ADATA XPG SX8200 Pro 1TB 3D NAND NVMe,Intel 660p 1TB m.2 ,1TB WD Blue 3D NAND,500GB WD Blue 3D NAND,
Display(s) 50" Sharp Roku TV 8ms responce time and Philips 75Hz 328E9QJAB 32" curved
Case BLACK LIAN LI O11 DYNAMIC XL FULL-TOWER GAMING CASE,
Power Supply 1600 Watt
Software Windows 10
Not sure about damage but I think a hair dryer may help in getting the cpu off the cooler along with a thin putty knife. Damn tho.
 
  • Like
Reactions: HTC
Joined
Feb 2, 2015
Messages
2,707 (0.81/day)
Location
On The Highway To Hell \m/
It happens. That's why they say to remove the HSF while it and the CPU are still warm. And with a twist instead of a straight pull. I doubt you broke anything. But there's only one way to find out...put it back together and see if it still works.

Good luck!
 

HTC

Joined
Apr 1, 2008
Messages
4,601 (0.79/day)
Location
Portugal
System Name HTC's System
Processor Ryzen 5 2600X
Motherboard Asrock Taichi X370
Cooling NH-C14, with the AM4 mounting kit
Memory G.Skill Kit 16GB DDR4 F4 - 3200 C16D - 16 GTZB
Video Card(s) Sapphire Nitro+ Radeon RX 480 OC 4 GB
Storage 1 Samsung NVMe 960 EVO 250 GB + 1 3.5" Seagate IronWolf Pro 6TB 7200RPM 256MB SATA III
Display(s) LG 27UD58
Case Fractal Design Define R6 USB-C
Audio Device(s) Onboard
Power Supply Corsair TX 850M 80+ Gold
Mouse Razer Deathadder Elite
Software Ubuntu 19.04 LTS
It happens. That's why they say to remove the HSF while it and the CPU are still warm. And with a twist instead of a straight pull. I doubt you broke anything. But there's only one way to find out...put it back together and see if it still works.

Good luck!

I had turned off the PC like 3 minutes earlier.

Assembling the Noctua cooler now: fingers crossed!
 
Joined
Nov 28, 2012
Messages
2,785 (0.67/day)
System Name BoX-Server | 775PC
Processor I3 3.5GHZ (3150) | Modded Xeon E5450 (OC @3.60)
Motherboard ASRock B85M-ITX | ASUS P5Q-EM
Cooling OEZM HSK | 92MM Heatsink RGB
Memory 8GB DDR3 | 8GB DDR2
Video Card(s) AMD 6450 | AMD RX 550 4GB
Storage 120GB SSD 1TB WD | 120GB SSD 1TB Seagate 500GB HDD <<
Display(s) DELL 17" LCD 1280x1024 | ASUS 24" LCD IPS
Case CoolerMaster 110 | RoseWill ZIRCON
Audio Device(s) Onboard
Power Supply Rosewill 610WATT | Rosewill 550WATT
Mouse Input-Director| RoseWill FUSION C40
Keyboard Input-Director | RoseWill FUSION
Software Windows 10 Pro 64-Bit
This happened to me once. The CPU was so stuck I had to use a Flat-Head to Separate the Cooler&CPU
 

HTC

Joined
Apr 1, 2008
Messages
4,601 (0.79/day)
Location
Portugal
System Name HTC's System
Processor Ryzen 5 2600X
Motherboard Asrock Taichi X370
Cooling NH-C14, with the AM4 mounting kit
Memory G.Skill Kit 16GB DDR4 F4 - 3200 C16D - 16 GTZB
Video Card(s) Sapphire Nitro+ Radeon RX 480 OC 4 GB
Storage 1 Samsung NVMe 960 EVO 250 GB + 1 3.5" Seagate IronWolf Pro 6TB 7200RPM 256MB SATA III
Display(s) LG 27UD58
Case Fractal Design Define R6 USB-C
Audio Device(s) Onboard
Power Supply Corsair TX 850M 80+ Gold
Mouse Razer Deathadder Elite
Software Ubuntu 19.04 LTS
This happened to me once. The CPU was so stuck I had to use a Flat-Head to Separate the Cooler&CPU

Didn't need to use any tool: tried to rotate the CPU to dislodge it and it worked but i had to use quite a bit of force.

What surprised me was that the CPU came off from the socket while it was locked.
 
Joined
Jan 25, 2014
Messages
2,068 (0.56/day)
System Name Ryzen 2023
Processor AMD Ryzen 7 7700
Motherboard Asrock B650E Steel Legend Wifi
Cooling Noctua NH-D15
Memory G Skill Flare X5 2x16gb cl32@6000 MHz
Video Card(s) Sapphire Radeon RX 6950 XT Nitro + gaming Oc
Storage WESTERN DIGITAL 1TB 64MB 7k SATA600 Blue WD10EZEX, WD Black SN850X 1Tb nvme
Display(s) LG 27GP850P-B
Case Corsair 5000D airflow tempered glass
Power Supply Seasonic Prime GX-850W
Mouse A4Tech V7M bloody
Keyboard Genius KB-G255
Software Windows 10 64bit
That is normal. That happens from time to time.
 
Joined
Oct 17, 2012
Messages
9,781 (2.34/day)
Location
Massachusetts
System Name Americas cure is the death of Social Justice & Political Correctness
Processor i7-11700K
Motherboard Asrock Z590 Extreme wifi 6E
Cooling Noctua NH-U12A
Memory 32GB Corsair RGB fancy boi 5000
Video Card(s) RTX 3090 Reference
Storage Samsung 970 Evo 1Tb + Samsung 970 Evo 500Gb
Display(s) Dell - 27" LED QHD G-SYNC x2
Case Fractal Design Meshify-C
Audio Device(s) on board
Power Supply Seasonic Focus+ Gold 1000 Watt
Mouse Logitech G502 spectrum
Keyboard AZIO MGK-1 RGB (Kaith Blue)
Software Win 10 Professional 64 bit
Benchmark Scores the MLGeesiest
Did you use the stock noctua thermal interface material or something different? Just curious what was used so I can avoid it
 
Joined
Nov 28, 2012
Messages
2,785 (0.67/day)
System Name BoX-Server | 775PC
Processor I3 3.5GHZ (3150) | Modded Xeon E5450 (OC @3.60)
Motherboard ASRock B85M-ITX | ASUS P5Q-EM
Cooling OEZM HSK | 92MM Heatsink RGB
Memory 8GB DDR3 | 8GB DDR2
Video Card(s) AMD 6450 | AMD RX 550 4GB
Storage 120GB SSD 1TB WD | 120GB SSD 1TB Seagate 500GB HDD <<
Display(s) DELL 17" LCD 1280x1024 | ASUS 24" LCD IPS
Case CoolerMaster 110 | RoseWill ZIRCON
Audio Device(s) Onboard
Power Supply Rosewill 610WATT | Rosewill 550WATT
Mouse Input-Director| RoseWill FUSION C40
Keyboard Input-Director | RoseWill FUSION
Software Windows 10 Pro 64-Bit
That is normal. That happens from time to time.
Yeah, Normally if the PC is old/Dusty

Did you use the stock noctua thermal interface material or something different? Just curious what was used so I can avoid it
Normally I try to Avoid using that at All-Cost. Like to use Sliver-5 when possible
 

HTC

Joined
Apr 1, 2008
Messages
4,601 (0.79/day)
Location
Portugal
System Name HTC's System
Processor Ryzen 5 2600X
Motherboard Asrock Taichi X370
Cooling NH-C14, with the AM4 mounting kit
Memory G.Skill Kit 16GB DDR4 F4 - 3200 C16D - 16 GTZB
Video Card(s) Sapphire Nitro+ Radeon RX 480 OC 4 GB
Storage 1 Samsung NVMe 960 EVO 250 GB + 1 3.5" Seagate IronWolf Pro 6TB 7200RPM 256MB SATA III
Display(s) LG 27UD58
Case Fractal Design Define R6 USB-C
Audio Device(s) Onboard
Power Supply Corsair TX 850M 80+ Gold
Mouse Razer Deathadder Elite
Software Ubuntu 19.04 LTS
Did you use the stock noctua thermal interface material or something different? Just curious what was used so I can avoid it

I had used the paste that came with the stock cooler.

Yeah, Normally if the PC is old/Dusty

Normally I try to Avoid using that at All-Cost. Like to use Sliver-5 when possible

Put the Noctua thermal paste this time.

Good news is the PC booted and seems OK, for now!
 

newtekie1

Semi-Retired Folder
Joined
Nov 22, 2005
Messages
28,472 (4.25/day)
Location
Indiana, USA
Processor Intel Core i7 10850K@5.2GHz
Motherboard AsRock Z470 Taichi
Cooling Corsair H115i Pro w/ Noctua NF-A14 Fans
Memory 32GB DDR4-3600
Video Card(s) RTX 2070 Super
Storage 500GB SX8200 Pro + 8TB with 1TB SSD Cache
Display(s) Acer Nitro VG280K 4K 28"
Case Fractal Design Define S
Audio Device(s) Onboard is good enough for me
Power Supply eVGA SuperNOVA 1000w G3
Software Windows 10 Pro x64
Whenever you're removing a cooler from a ZIF socket, you should give the cooler a twist to break the TIM suction.
 

HTC

Joined
Apr 1, 2008
Messages
4,601 (0.79/day)
Location
Portugal
System Name HTC's System
Processor Ryzen 5 2600X
Motherboard Asrock Taichi X370
Cooling NH-C14, with the AM4 mounting kit
Memory G.Skill Kit 16GB DDR4 F4 - 3200 C16D - 16 GTZB
Video Card(s) Sapphire Nitro+ Radeon RX 480 OC 4 GB
Storage 1 Samsung NVMe 960 EVO 250 GB + 1 3.5" Seagate IronWolf Pro 6TB 7200RPM 256MB SATA III
Display(s) LG 27UD58
Case Fractal Design Define R6 USB-C
Audio Device(s) Onboard
Power Supply Corsair TX 850M 80+ Gold
Mouse Razer Deathadder Elite
Software Ubuntu 19.04 LTS
Whenever you're removing a cooler from a ZIF socket, you should give the cooler a twist to break the TIM suction.

I've seen it middly stuck before but this time it was as if it was nailed together: that's how stuck it was!

Almost gave me a heart attack when i noticed the CPU came off the board!

EDIT

How do i edit the title to state "Solved"?

EDIT #2

Before and after pics:

20170812_230002.jpg 20170812_235005.jpg

Tried to use the 2nd fan but it doesn't fit by like 3-4 mm :(
 
Last edited:

rtwjunkie

PC Gaming Enthusiast
Supporter
Joined
Jul 25, 2008
Messages
13,909 (2.43/day)
Location
Louisiana -Laissez les bons temps rouler!
System Name Bayou Phantom
Processor Core i7-8700k 4.4Ghz @ 1.18v
Motherboard ASRock Z390 Phantom Gaming 6
Cooling All air: 2x140mm Fractal exhaust; 3x 140mm Cougar Intake; Enermax T40F Black CPU cooler
Memory 2x 16GB Mushkin Redline DDR-4 3200
Video Card(s) EVGA RTX 2080 Ti Xc
Storage 1x 500 MX500 SSD; 2x 6TB WD Black; 1x 4TB WD Black; 1x400GB VelRptr; 1x 4TB WD Blue storage (eSATA)
Display(s) HP 27q 27" IPS @ 2560 x 1440
Case Fractal Design Define R4 Black w/Titanium front -windowed
Audio Device(s) Soundblaster Z
Power Supply Seasonic X-850
Mouse Coolermaster Sentinel III (large palm grip!)
Keyboard Logitech G610 Orion mechanical (Cherry Brown switches)
Software Windows 10 Pro 64-bit (Start10 & Fences 3.0 installed)
How do i edit the title to state "Solved"?
up at the top right of your OP you should see an edit thread drop-down.

also, thanks for letting us know it is resolved!
 
  • Like
Reactions: HTC
Joined
Oct 17, 2012
Messages
9,781 (2.34/day)
Location
Massachusetts
System Name Americas cure is the death of Social Justice & Political Correctness
Processor i7-11700K
Motherboard Asrock Z590 Extreme wifi 6E
Cooling Noctua NH-U12A
Memory 32GB Corsair RGB fancy boi 5000
Video Card(s) RTX 3090 Reference
Storage Samsung 970 Evo 1Tb + Samsung 970 Evo 500Gb
Display(s) Dell - 27" LED QHD G-SYNC x2
Case Fractal Design Meshify-C
Audio Device(s) on board
Power Supply Seasonic Focus+ Gold 1000 Watt
Mouse Logitech G502 spectrum
Keyboard AZIO MGK-1 RGB (Kaith Blue)
Software Win 10 Professional 64 bit
Benchmark Scores the MLGeesiest
I had used the paste that came with the stock cooler.



Put the Noctua thermal paste this time.

Good news is the PC booted and seems OK, for now!

Isn't that a Noctua cooler? If so the stock paste that came with it would've been Noctua
 

HTC

Joined
Apr 1, 2008
Messages
4,601 (0.79/day)
Location
Portugal
System Name HTC's System
Processor Ryzen 5 2600X
Motherboard Asrock Taichi X370
Cooling NH-C14, with the AM4 mounting kit
Memory G.Skill Kit 16GB DDR4 F4 - 3200 C16D - 16 GTZB
Video Card(s) Sapphire Nitro+ Radeon RX 480 OC 4 GB
Storage 1 Samsung NVMe 960 EVO 250 GB + 1 3.5" Seagate IronWolf Pro 6TB 7200RPM 256MB SATA III
Display(s) LG 27UD58
Case Fractal Design Define R6 USB-C
Audio Device(s) Onboard
Power Supply Corsair TX 850M 80+ Gold
Mouse Razer Deathadder Elite
Software Ubuntu 19.04 LTS
up at the top right of your OP you should see an edit thread drop-down.

also, thanks for letting us know it is resolved!

Learn something every day: thanks!

Isn't that a Noctua cooler? If so the stock paste that came with it would've been Noctua

It had the stock paste from the stock cooler.

Now i have Noctua's paste in the Noctua cooler.
 
Joined
Oct 17, 2012
Messages
9,781 (2.34/day)
Location
Massachusetts
System Name Americas cure is the death of Social Justice & Political Correctness
Processor i7-11700K
Motherboard Asrock Z590 Extreme wifi 6E
Cooling Noctua NH-U12A
Memory 32GB Corsair RGB fancy boi 5000
Video Card(s) RTX 3090 Reference
Storage Samsung 970 Evo 1Tb + Samsung 970 Evo 500Gb
Display(s) Dell - 27" LED QHD G-SYNC x2
Case Fractal Design Meshify-C
Audio Device(s) on board
Power Supply Seasonic Focus+ Gold 1000 Watt
Mouse Logitech G502 spectrum
Keyboard AZIO MGK-1 RGB (Kaith Blue)
Software Win 10 Professional 64 bit
Benchmark Scores the MLGeesiest
It had the stock paste from the stock cooler.

okay, your answer wasnt very clear the first time. STOCK paste is stock , i didnt see mention of a 2nd cooler till just now, so i thought stock was stock noctua, not stock other cooler
 

HTC

Joined
Apr 1, 2008
Messages
4,601 (0.79/day)
Location
Portugal
System Name HTC's System
Processor Ryzen 5 2600X
Motherboard Asrock Taichi X370
Cooling NH-C14, with the AM4 mounting kit
Memory G.Skill Kit 16GB DDR4 F4 - 3200 C16D - 16 GTZB
Video Card(s) Sapphire Nitro+ Radeon RX 480 OC 4 GB
Storage 1 Samsung NVMe 960 EVO 250 GB + 1 3.5" Seagate IronWolf Pro 6TB 7200RPM 256MB SATA III
Display(s) LG 27UD58
Case Fractal Design Define R6 USB-C
Audio Device(s) Onboard
Power Supply Corsair TX 850M 80+ Gold
Mouse Razer Deathadder Elite
Software Ubuntu 19.04 LTS
okay, your answer wasnt very clear the first time. STOCK paste is stock , i didnt see mention of a 2nd cooler till just now, so i thought stock was stock noctua, not stock other cooler

The R5 1600 came with a cooler: it's the paste that came pre-applied that i had used originally.

@ the time, i hadn't the AM4 adapter to put this NH-C14 cooler directly so i had to wait.

To those that need to ask for an AM4 mounting kit from Noctua but have misplaced the cooler's invoice (like me), send this as proof of purchase instead of the coolers' invoice:

20170805_100640.png

I covered in white my full name and my e-mail address (required)
 
Last edited:
Joined
Feb 19, 2006
Messages
6,270 (0.95/day)
Location
New York
Processor INTEL CORE I9-9900K @ 5Ghz all core 4.7Ghz Cache @1.305 volts
Motherboard ASUS PRIME Z390-P ATX
Cooling CORSAIR HYDRO H150I PRO RGB 360MM 6x120mm fans push pull
Memory CRUCIAL BALLISTIX 3000Mhz 4x8 32gb @ 4000Mhz
Video Card(s) EVGA GEFORECE RTX 2080 SUPER XC HYBRID GAMING
Storage ADATA XPG SX8200 Pro 1TB 3D NAND NVMe,Intel 660p 1TB m.2 ,1TB WD Blue 3D NAND,500GB WD Blue 3D NAND,
Display(s) 50" Sharp Roku TV 8ms responce time and Philips 75Hz 328E9QJAB 32" curved
Case BLACK LIAN LI O11 DYNAMIC XL FULL-TOWER GAMING CASE,
Power Supply 1600 Watt
Software Windows 10
I thought the CPU socket was designed to let go before it was torn from the PCB.:confused:
 
Joined
Mar 23, 2016
Messages
4,839 (1.65/day)
Processor Ryzen 9 5900X
Motherboard MSI B450 Tomahawk ATX
Cooling Cooler Master Hyper 212 Black Edition
Memory VENGEANCE LPX 2 x 16GB DDR4-3600 C18 OCed 3800
Video Card(s) XFX Speedster SWFT309 AMD Radeon RX 6700 XT CORE Gaming
Storage 970 EVO NVMe M.2 500 GB, 870 QVO 1 TB
Display(s) Samsung 28” 4K monitor
Case Phantek Eclipse P400S (PH-EC416PS)
Audio Device(s) EVGA NU Audio
Power Supply EVGA 850 BQ
Mouse SteelSeries Rival 310
Keyboard Logitech G G413 Silver
Software Windows 10 Professional 64-bit v22H2
Count yourself lucky @HTC . Had it happen to a Pentium 4 Northwood but lost a pin.
 

Norton

Moderator - Returning from the Darkness
Staff member
Joined
Dec 21, 2011
Messages
14,108 (3.15/day)
Location
Northeast USA
System Name Main PC- Gamer- Main Cruncher/Folder and too many crunching/folding rigs
Processor Ryzen 5900X- Ryzen 5950X- Ryzen 3950X and etc...
Motherboard Asrock X570 Extreme4- MSI X570S Tomahawk MAX WiFi- MSI B450M Bazooka Max and etc...
Cooling Noctua NH-U14S (dual fan)- EK 360 AIO with push/pull fans- Corsair H115i RGB Pro XT and etc...
Memory 2x16GB GSkill FlareX 3200/c14- 4x8GB Corsair Vengeance 3600/c16- 2x16GB Team 3600/c18 and etc..
Video Card(s) MSI Gaming RX 6800- Asus RTX 3070 TUF OC- MSI Ventus GTX 1660Ti and etc...
Storage Main PC (1TB WD SN850- 2TB PNY CS 3040- 2TB Seagate Firecuda) and etc...
Display(s) Main PC (2x24" Dell UltraSharp U2414H)
Case Phanteks P600s- Seasonic Q704- Fractal Meshify C and etc...
Audio Device(s) Logitech Z625 THX 2.1 speakers
Power Supply EVGA 750 G3- SeaSonic DGC 750- EVGA P2 850 and etc...
Mouse G300s
Keyboard Corsair K65
VR HMD N/A
Software Windows 10 Pro or Ubuntu
Benchmark Scores Why sit on the Bench when you can get in the game and Crunch!!!
I thought the CPU socket was designed to let go before it was torn from the PCB.:confused:
This happens from time to time with pin grid array sockets- socket 939/AM2/AM3 and others have had this happen.

Note that the Noctua paste is not likely to cause the same problem but giving the cooler a twist before trying to remove is still the best way to go
 
Last edited:

newtekie1

Semi-Retired Folder
Joined
Nov 22, 2005
Messages
28,472 (4.25/day)
Location
Indiana, USA
Processor Intel Core i7 10850K@5.2GHz
Motherboard AsRock Z470 Taichi
Cooling Corsair H115i Pro w/ Noctua NF-A14 Fans
Memory 32GB DDR4-3600
Video Card(s) RTX 2070 Super
Storage 500GB SX8200 Pro + 8TB with 1TB SSD Cache
Display(s) Acer Nitro VG280K 4K 28"
Case Fractal Design Define S
Audio Device(s) Onboard is good enough for me
Power Supply eVGA SuperNOVA 1000w G3
Software Windows 10 Pro x64
I've seen it middly stuck before but this time it was as if it was nailed together: that's how stuck it was!

Almost gave me a heart attack when i noticed the CPU came off the board!

I had a P4 pop the IHS off trying to get it off the heatsink before.

Delid.jpg
 

HTC

Joined
Apr 1, 2008
Messages
4,601 (0.79/day)
Location
Portugal
System Name HTC's System
Processor Ryzen 5 2600X
Motherboard Asrock Taichi X370
Cooling NH-C14, with the AM4 mounting kit
Memory G.Skill Kit 16GB DDR4 F4 - 3200 C16D - 16 GTZB
Video Card(s) Sapphire Nitro+ Radeon RX 480 OC 4 GB
Storage 1 Samsung NVMe 960 EVO 250 GB + 1 3.5" Seagate IronWolf Pro 6TB 7200RPM 256MB SATA III
Display(s) LG 27UD58
Case Fractal Design Define R6 USB-C
Audio Device(s) Onboard
Power Supply Corsair TX 850M 80+ Gold
Mouse Razer Deathadder Elite
Software Ubuntu 19.04 LTS
This happens from time to time with pin grid array sockets- socket 939/AM2/AM3 and others have had this happen.

Note that the Noctua paste is not likely to cause the same problem but giving the cooler a twist before trying to remove is still the best way to go

Will do that next time: thanks!

I had a P4 pop the IHS off trying to get it off the heatsink before.

Ouch!
 
Joined
Nov 28, 2012
Messages
2,785 (0.67/day)
System Name BoX-Server | 775PC
Processor I3 3.5GHZ (3150) | Modded Xeon E5450 (OC @3.60)
Motherboard ASRock B85M-ITX | ASUS P5Q-EM
Cooling OEZM HSK | 92MM Heatsink RGB
Memory 8GB DDR3 | 8GB DDR2
Video Card(s) AMD 6450 | AMD RX 550 4GB
Storage 120GB SSD 1TB WD | 120GB SSD 1TB Seagate 500GB HDD <<
Display(s) DELL 17" LCD 1280x1024 | ASUS 24" LCD IPS
Case CoolerMaster 110 | RoseWill ZIRCON
Audio Device(s) Onboard
Power Supply Rosewill 610WATT | Rosewill 550WATT
Mouse Input-Director| RoseWill FUSION C40
Keyboard Input-Director | RoseWill FUSION
Software Windows 10 Pro 64-Bit
Have any one tried using just water to clean off computer parts? Hearing if you let them dry then All should be good. Been wanting to try it but idk still :rolleyes:
 
Joined
Aug 20, 2007
Messages
20,709 (3.41/day)
System Name Pioneer
Processor Ryzen R9 7950X
Motherboard GIGABYTE Aorus Elite X670 AX
Cooling Noctua NH-D15 + A whole lotta Sunon and Corsair Maglev blower fans...
Memory 64GB (4x 16GB) G.Skill Flare X5 @ DDR5-6000 CL30
Video Card(s) XFX RX 7900 XTX Speedster Merc 310
Storage 2x Crucial P5 Plus 2TB PCIe 4.0 NVMe SSDs
Display(s) 55" LG 55" B9 OLED 4K Display
Case Thermaltake Core X31
Audio Device(s) TOSLINK->Schiit Modi MB->Asgard 2 DAC Amp->AKG Pro K712 Headphones or HDMI->B9 OLED
Power Supply FSP Hydro Ti Pro 850W
Mouse Logitech G305 Lightspeed Wireless
Keyboard WASD Code v3 with Cherry Green keyswitches
Software Windows 11 Enterprise (legit), Gentoo Linux x64
This is how I lost my Opty 185 back in the day, when they were worth like $400.
 
Joined
Feb 19, 2006
Messages
6,270 (0.95/day)
Location
New York
Processor INTEL CORE I9-9900K @ 5Ghz all core 4.7Ghz Cache @1.305 volts
Motherboard ASUS PRIME Z390-P ATX
Cooling CORSAIR HYDRO H150I PRO RGB 360MM 6x120mm fans push pull
Memory CRUCIAL BALLISTIX 3000Mhz 4x8 32gb @ 4000Mhz
Video Card(s) EVGA GEFORECE RTX 2080 SUPER XC HYBRID GAMING
Storage ADATA XPG SX8200 Pro 1TB 3D NAND NVMe,Intel 660p 1TB m.2 ,1TB WD Blue 3D NAND,500GB WD Blue 3D NAND,
Display(s) 50" Sharp Roku TV 8ms responce time and Philips 75Hz 328E9QJAB 32" curved
Case BLACK LIAN LI O11 DYNAMIC XL FULL-TOWER GAMING CASE,
Power Supply 1600 Watt
Software Windows 10
This happens from time to time with pin grid array sockets- socket 939/AM2/AM3 and others have had this happen.

Note that the Noctua paste is not likely to cause the same problem but giving the cooler a twist before trying to remove is still the best way to go
what I meant is I thought the CPU sockets lever and biting teeth was designed to let it break free before the actual cpu Socket was was ripped from the board. So if for example what happened to the OP he wouldnt have to buy a new mobo because the whole cpu bed ripped lose from the mobo PCB, if such as this happened.
 
  • Like
Reactions: HTC
Top