- Joined
- Nov 3, 2006
- Messages
- 340 (0.05/day)
- Location
- Jonesbor, AR United States
Processor | Q6600 G0 SLACR @ 3.76 GHz |
---|---|
Motherboard | ASUS Maximus Formula X38 |
Cooling | D-Tek Fuzion Nozzled |
Memory | 2x2 GB Geil Esoteria @ DDR2-1129 |
Video Card(s) | 2 Diamond HD 2900XT 1GB Crossfire 940/075 MCW60 |
Storage | 2 Western Digital 500 Gb Maxtor 250 Gb |
Display(s) | Westinghouse LVM-37W3 1080P 37" HDTV |
Case | Thermaltake Armor Silver w/ 250mm side fan |
Audio Device(s) | Auzentech Prelude |
Power Supply | Silverstone DA850 850W |
Ok well I got my second X1950 Pro today, connected the bridges, booted, installed the 7.3 Catalysts after uninstalling and running driver cleaner pro (properly).....then I go to enable Crossfire and it says it can't because a 3d app is running (it isn't) then it says that it may be because the interconnects aren't connected.
Is there a certain direction that the J1 and J2 connections should be connected?
Also, in the CCC it says that a RGB monitor must be used, and that a TV may not be supported. Why does it say this? My TV with S-Video supports RGB (to my knowledge....it's color), furthermore ATI says NOTHING of this in the system requirements.
Please help! I tried reversing the bridges where the J2 sides are on the main PCI-E slotted card too....
Is there a certain direction that the J1 and J2 connections should be connected?
Also, in the CCC it says that a RGB monitor must be used, and that a TV may not be supported. Why does it say this? My TV with S-Video supports RGB (to my knowledge....it's color), furthermore ATI says NOTHING of this in the system requirements.
Please help! I tried reversing the bridges where the J2 sides are on the main PCI-E slotted card too....