- Joined
- Mar 18, 2008
- Messages
- 5,717 (0.97/day)
System Name | Virtual Reality / Bioinformatics |
---|---|
Processor | Undead CPU |
Motherboard | Undead TUF X99 |
Cooling | Noctua NH-D15 |
Memory | GSkill 128GB DDR4-3000 |
Video Card(s) | EVGA RTX 3090 FTW3 Ultra |
Storage | Samsung 960 Pro 1TB + 860 EVO 2TB + WD Black 5TB |
Display(s) | 32'' 4K Dell |
Case | Fractal Design R5 |
Audio Device(s) | BOSE 2.0 |
Power Supply | Seasonic 850watt |
Mouse | Logitech Master MX |
Keyboard | Corsair K70 Cherry MX Blue |
VR HMD | HTC Vive + Oculus Quest 2 |
Software | Windows 10 P |
As i was migrating my system to NVMe SSD, i left it on to back up all of my files over the course of 12hrs. I had finally installed everything on new SSD and copying files back to computer the system just turned off. And from there it simply refused to stay on.
It will turn on briefly for ~1 second and then shut down immediately. If i leave it off for 10 mins it would stay on for a bit longer. If I unplug SATA devices it would also seem to hang on a bit longer.
Here is the video showing the symptoms. Talking about freaking bad luck. I thought EVGA has good PSUs.
System spec on the left in case you are wondering if I am overloading the PSU. Also this system is hooked up to APC UPS. So input from grid should be no problem.
It will turn on briefly for ~1 second and then shut down immediately. If i leave it off for 10 mins it would stay on for a bit longer. If I unplug SATA devices it would also seem to hang on a bit longer.
Here is the video showing the symptoms. Talking about freaking bad luck. I thought EVGA has good PSUs.
System spec on the left in case you are wondering if I am overloading the PSU. Also this system is hooked up to APC UPS. So input from grid should be no problem.