• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

E5200 OC/BenchMark Thread.(56k warning)

JrRacinFan

Served 5k and counting ...
Joined
Mar 17, 2007
Messages
20,073 (3.23/day)
Location
Youngstown, OH
System Name Dual Build Streamer
Processor Ryzen 7900x3d : Ryzen 4600G
Motherboard AsRock B650E Steel Legend : Giga B450i Aorus
Cooling Custom Water 1x420 : Stock
Memory 32GB T-Force Deltas : 16GB Dominator Platinums
Video Card(s) PowerColor 7900 XTX Liquid Devil: iGPU
Storage 20+ TB
Display(s) Sammy 49" 5k Ultrawide
Case Custom White Painted Phanteks Enthoo Pro 2
Audio Device(s) Onboard : Onboard
Power Supply EVGA 1200W P2
Mouse Corsair M65 RGB Elite White
Keyboard Hyperx Origins 65
Software Windows 10
after disabling the C1E & EIST .. the voltage still show as 1.088 in windows instead of 1.250 (as per BIOS) .. what do you suggest ??

Thats quite a large droop. Really have no suggestions, jusst keep her cool n quiet. Enjoy! :)
 
Joined
Jan 2, 2009
Messages
9,899 (1.78/day)
Location
Essex, England
System Name My pc
Processor Ryzen 5 3600
Motherboard Asus Rog b450-f
Cooling Cooler master 120mm aio
Memory 16gb ddr4 3200mhz
Video Card(s) MSI Ventus 3x 3070
Storage 2tb intel nvme and 2tb generic ssd
Display(s) Generic dell 1080p overclocked to 75hz
Case Phanteks enthoo
Power Supply 650w of borderline fire hazard
Mouse Some wierd Chinese vertical mouse
Keyboard Generic mechanical keyboard
Software Windows ten
I got 25 mhz more !



ha ha

I was aiming more much higher, I put all my voltages suicide high but to no avail :(

There is a setting to improve vdroop but I can't remember the name, should be at the bottom somewhere of the over clock settings.
 

Medros

New Member
Joined
Apr 10, 2009
Messages
22 (0.00/day)
after disabling the C1E & EIST .. the voltage still show as 1.088 in windows instead of 1.250 (as per BIOS) .. what do you suggest ??

that is strange, i'm using the same motherboard and getting much less droop
 

torrent

New Member
Joined
Apr 14, 2009
Messages
25 (0.00/day)
Location
Georgetown, Penang, Malaysia
System Name Dark Knight
Processor Intel Pentium Dual Core E5200 (3.45GHz@300*11.5)
Motherboard Gigabyte G31M-ES2L
Cooling Cooler Master Hyper TX2 | 120mm front intake fan | 120mm side fan | 80mm rear fan
Memory Corsair XMS2 2GB * 2
Video Card(s) Sapphire Radeon HD4830 512MB
Storage WD Caviar Green 500GB SATA HDD | Maxtor 160GB IDE HDD
Display(s) Dell E228WFP (1680*1050)
Case PowerLogic Modena GTX2000 casing
Audio Device(s) On-board 8CH Realtek HD Audio
Power Supply AcBel E2 Power 510W
BIOS' are usually a little out - with mine set to 1.368 in the BIOS, Windows states 1.344 - it's annoying and something you would have thought manufacturers would be able to fix. Common issue, not much you can do really. Look for the latest BIOS for your board, if that doesn't help, record the values when in Windows and make a table for yourself so that you can use it as a quick reference if you ever need it at a later date.

In any case, the voltage value set in BIOS will be the accurate one right?

I wonder is it possible cause by the OS (Windows XP SP3)? Cause either i set the voltage value as 1.3125 or 1.2500 in BIOS, the value shows in CPU-Z is still remain no change at 1.088.

I will try to play with other voltage value and see what is the reading in CPU-Z. Thanks!
 

torrent

New Member
Joined
Apr 14, 2009
Messages
25 (0.00/day)
Location
Georgetown, Penang, Malaysia
System Name Dark Knight
Processor Intel Pentium Dual Core E5200 (3.45GHz@300*11.5)
Motherboard Gigabyte G31M-ES2L
Cooling Cooler Master Hyper TX2 | 120mm front intake fan | 120mm side fan | 80mm rear fan
Memory Corsair XMS2 2GB * 2
Video Card(s) Sapphire Radeon HD4830 512MB
Storage WD Caviar Green 500GB SATA HDD | Maxtor 160GB IDE HDD
Display(s) Dell E228WFP (1680*1050)
Case PowerLogic Modena GTX2000 casing
Audio Device(s) On-board 8CH Realtek HD Audio
Power Supply AcBel E2 Power 510W
that is strange, i'm using the same motherboard and getting much less droop

Medros, do you mind to provide details of your OC? May be i can duplicate your setting and test again. Thanks in advance!
 
Joined
Jan 2, 2009
Messages
9,899 (1.78/day)
Location
Essex, England
System Name My pc
Processor Ryzen 5 3600
Motherboard Asus Rog b450-f
Cooling Cooler master 120mm aio
Memory 16gb ddr4 3200mhz
Video Card(s) MSI Ventus 3x 3070
Storage 2tb intel nvme and 2tb generic ssd
Display(s) Generic dell 1080p overclocked to 75hz
Case Phanteks enthoo
Power Supply 650w of borderline fire hazard
Mouse Some wierd Chinese vertical mouse
Keyboard Generic mechanical keyboard
Software Windows ten
update !

4.2 ghz



Crazy voltages though, won't take it further with this cooler. ( check the CPU temp in the bottom right! That is not even the core temps D: )
 

torrent

New Member
Joined
Apr 14, 2009
Messages
25 (0.00/day)
Location
Georgetown, Penang, Malaysia
System Name Dark Knight
Processor Intel Pentium Dual Core E5200 (3.45GHz@300*11.5)
Motherboard Gigabyte G31M-ES2L
Cooling Cooler Master Hyper TX2 | 120mm front intake fan | 120mm side fan | 80mm rear fan
Memory Corsair XMS2 2GB * 2
Video Card(s) Sapphire Radeon HD4830 512MB
Storage WD Caviar Green 500GB SATA HDD | Maxtor 160GB IDE HDD
Display(s) Dell E228WFP (1680*1050)
Case PowerLogic Modena GTX2000 casing
Audio Device(s) On-board 8CH Realtek HD Audio
Power Supply AcBel E2 Power 510W
Joined
Jan 2, 2009
Messages
9,899 (1.78/day)
Location
Essex, England
System Name My pc
Processor Ryzen 5 3600
Motherboard Asus Rog b450-f
Cooling Cooler master 120mm aio
Memory 16gb ddr4 3200mhz
Video Card(s) MSI Ventus 3x 3070
Storage 2tb intel nvme and 2tb generic ssd
Display(s) Generic dell 1080p overclocked to 75hz
Case Phanteks enthoo
Power Supply 650w of borderline fire hazard
Mouse Some wierd Chinese vertical mouse
Keyboard Generic mechanical keyboard
Software Windows ten
GOOD SPEED!!! but i guess @ 1.72V, the power efficiency might not be optimum though

Ha ha got that right, was way to hot too, computer crashed running super pi 1 million.

3.3 is my 24/7 over clock :) @1.36 volts
 

JrRacinFan

Served 5k and counting ...
Joined
Mar 17, 2007
Messages
20,073 (3.23/day)
Location
Youngstown, OH
System Name Dual Build Streamer
Processor Ryzen 7900x3d : Ryzen 4600G
Motherboard AsRock B650E Steel Legend : Giga B450i Aorus
Cooling Custom Water 1x420 : Stock
Memory 32GB T-Force Deltas : 16GB Dominator Platinums
Video Card(s) PowerColor 7900 XTX Liquid Devil: iGPU
Storage 20+ TB
Display(s) Sammy 49" 5k Ultrawide
Case Custom White Painted Phanteks Enthoo Pro 2
Audio Device(s) Onboard : Onboard
Power Supply EVGA 1200W P2
Mouse Corsair M65 RGB Elite White
Keyboard Hyperx Origins 65
Software Windows 10
That is totally nuts panther!!!

And I thought I had b***s of steel when I pushed 1.61 through my e52. You deserve high praise for havin some cajones.
 
Joined
Jan 2, 2009
Messages
9,899 (1.78/day)
Location
Essex, England
System Name My pc
Processor Ryzen 5 3600
Motherboard Asus Rog b450-f
Cooling Cooler master 120mm aio
Memory 16gb ddr4 3200mhz
Video Card(s) MSI Ventus 3x 3070
Storage 2tb intel nvme and 2tb generic ssd
Display(s) Generic dell 1080p overclocked to 75hz
Case Phanteks enthoo
Power Supply 650w of borderline fire hazard
Mouse Some wierd Chinese vertical mouse
Keyboard Generic mechanical keyboard
Software Windows ten
That is totally nuts panther!!!

And I thought I had b***s of steel when I pushed 1.61 through my e52. You deserve high praise for havin some cajones.


Ha ha, thank you, I knew it would be fine if I done everything quickly!


JR, I'm just behind you on CPU speed and Super pi speed now, its so tempting to push it just that little bit further but I already think I have got to cocky with the voltages he he.
 

JrRacinFan

Served 5k and counting ...
Joined
Mar 17, 2007
Messages
20,073 (3.23/day)
Location
Youngstown, OH
System Name Dual Build Streamer
Processor Ryzen 7900x3d : Ryzen 4600G
Motherboard AsRock B650E Steel Legend : Giga B450i Aorus
Cooling Custom Water 1x420 : Stock
Memory 32GB T-Force Deltas : 16GB Dominator Platinums
Video Card(s) PowerColor 7900 XTX Liquid Devil: iGPU
Storage 20+ TB
Display(s) Sammy 49" 5k Ultrawide
Case Custom White Painted Phanteks Enthoo Pro 2
Audio Device(s) Onboard : Onboard
Power Supply EVGA 1200W P2
Mouse Corsair M65 RGB Elite White
Keyboard Hyperx Origins 65
Software Windows 10
See how far the 12.5x multi takes you.
 
Joined
Jan 2, 2009
Messages
9,899 (1.78/day)
Location
Essex, England
System Name My pc
Processor Ryzen 5 3600
Motherboard Asus Rog b450-f
Cooling Cooler master 120mm aio
Memory 16gb ddr4 3200mhz
Video Card(s) MSI Ventus 3x 3070
Storage 2tb intel nvme and 2tb generic ssd
Display(s) Generic dell 1080p overclocked to 75hz
Case Phanteks enthoo
Power Supply 650w of borderline fire hazard
Mouse Some wierd Chinese vertical mouse
Keyboard Generic mechanical keyboard
Software Windows ten
I'll try to at least match you, but I will save that for tomorrow going to relax with some Doom 3 for now! :)

I'm sure you could crack out ever so slightly more too.
 

JrRacinFan

Served 5k and counting ...
Joined
Mar 17, 2007
Messages
20,073 (3.23/day)
Location
Youngstown, OH
System Name Dual Build Streamer
Processor Ryzen 7900x3d : Ryzen 4600G
Motherboard AsRock B650E Steel Legend : Giga B450i Aorus
Cooling Custom Water 1x420 : Stock
Memory 32GB T-Force Deltas : 16GB Dominator Platinums
Video Card(s) PowerColor 7900 XTX Liquid Devil: iGPU
Storage 20+ TB
Display(s) Sammy 49" 5k Ultrawide
Case Custom White Painted Phanteks Enthoo Pro 2
Audio Device(s) Onboard : Onboard
Power Supply EVGA 1200W P2
Mouse Corsair M65 RGB Elite White
Keyboard Hyperx Origins 65
Software Windows 10
I'll try to at least match you, but I will save that for tomorrow going to relax with some Doom 3 for now! :)

I'm sure you could crack out ever so slightly more too.

It would take me to crunch on the P35 some more with the water loop thats on the way. Too make work for such little gain. If you can post a Memset screenie I can take a look if yah want.
 

_jM

New Member
Joined
Jun 4, 2008
Messages
1,453 (0.25/day)
Location
Ocala,FL
System Name The money pit v.2 (v.1 is the wife!)
Processor Core2Quad-Q9550@3.9ghz/1860mhzFSB @1.344v
Motherboard ASUS Maximus II Formula = best damn P45 OCer out there!
Cooling CoolerMster V8-- Custom WC system on the way! =]
Memory 8GB DOMINATORS @1100mhz 5-5-5-18
Video Card(s) EVGA GTX 280
Storage 150GB WesternDigital Velociraptor OS Drive/1 WD 500AAKS for Storage
Display(s) SAMSUNG 2243SWX 22" LCD
Case Cooler Master Cosmos S w/custom lighting and cable management
Audio Device(s) X-Fi Titanium (Fatality edition) - paired with RAZER Barracuda's
Power Supply CORSAIR HX1000W modular PSU
Software Windows 7 RC 7100--eats vista for breakfast lunch and dinner!
Benchmark Scores Coming to a theater near you!
OK I have said it before.. but this time its fosho.. I am updating new scores tonite! It would meke me very happy and make it very easy if the people who have new scores to be updated, to go ahead and re-post the scores that you want to be added..

Like this---- _jM E5200@4.27Ghz- 12.868sec (superpi) or what ever it is,That way I dont need to search the thread for all the new scores. Thanks guys! :)
 

Medros

New Member
Joined
Apr 10, 2009
Messages
22 (0.00/day)
Medros, do you mind to provide details of your OC? May be i can duplicate your setting and test again. Thanks in advance!

Currently have mine set up with 250 mhz bus speed, and 12.5x multiplier at stock voltage for 3.125ghz (if i push it any farther get in the upper 60's under full load)
 

torrent

New Member
Joined
Apr 14, 2009
Messages
25 (0.00/day)
Location
Georgetown, Penang, Malaysia
System Name Dark Knight
Processor Intel Pentium Dual Core E5200 (3.45GHz@300*11.5)
Motherboard Gigabyte G31M-ES2L
Cooling Cooler Master Hyper TX2 | 120mm front intake fan | 120mm side fan | 80mm rear fan
Memory Corsair XMS2 2GB * 2
Video Card(s) Sapphire Radeon HD4830 512MB
Storage WD Caviar Green 500GB SATA HDD | Maxtor 160GB IDE HDD
Display(s) Dell E228WFP (1680*1050)
Case PowerLogic Modena GTX2000 casing
Audio Device(s) On-board 8CH Realtek HD Audio
Power Supply AcBel E2 Power 510W
Currently have mine set up with 250 mhz bus speed, and 12.5x multiplier at stock voltage for 3.125ghz (if i push it any farther get in the upper 60's under full load)

are you using stock cooler as well?? mind to share your spec?

my temp is like 10 C higher than yours under full load using Prime95 @ 3.0 GHz (240 * 12.5) ..

i think it has something to do with the typically hot weather over here .. able to pull the temp down by about 5 C if i turn on air condition @ 24 C

I am looking at this Cooler Master Hyper TX2 Heatsink, and might get my hand on 1 if i can get good price at PC fair here during the weekend :D
 

_jM

New Member
Joined
Jun 4, 2008
Messages
1,453 (0.25/day)
Location
Ocala,FL
System Name The money pit v.2 (v.1 is the wife!)
Processor Core2Quad-Q9550@3.9ghz/1860mhzFSB @1.344v
Motherboard ASUS Maximus II Formula = best damn P45 OCer out there!
Cooling CoolerMster V8-- Custom WC system on the way! =]
Memory 8GB DOMINATORS @1100mhz 5-5-5-18
Video Card(s) EVGA GTX 280
Storage 150GB WesternDigital Velociraptor OS Drive/1 WD 500AAKS for Storage
Display(s) SAMSUNG 2243SWX 22" LCD
Case Cooler Master Cosmos S w/custom lighting and cable management
Audio Device(s) X-Fi Titanium (Fatality edition) - paired with RAZER Barracuda's
Power Supply CORSAIR HX1000W modular PSU
Software Windows 7 RC 7100--eats vista for breakfast lunch and dinner!
Benchmark Scores Coming to a theater near you!
OK I have said it before.. but this time its fosho.. I am updating new scores tonite! It would meke me very happy and make it very easy if the people who have new scores to be updated, to go ahead and re-post the scores that you want to be added..

Like this---- _jM E5200@4.27Ghz- 12.868sec (superpi) or what ever it is,That way I dont need to search the thread for all the new scores. Thanks guys! :)

nuff said~
 

Medros

New Member
Joined
Apr 10, 2009
Messages
22 (0.00/day)
Medros, do you mind to provide details of your OC? May be i can duplicate your setting and test again. Thanks in advance!

are you using stock cooler as well?? mind to share your spec?

my temp is like 10 C higher than yours under full load using Prime95 @ 3.0 GHz (240 * 12.5) ..

i think it has something to do with the typically hot weather over here .. able to pull the temp down by about 5 C if i turn on air condition @ 24 C

I am looking at this Cooler Master Hyper TX2 Heatsink, and might get my hand on 1 if i can get good price at PC fair here during the weekend :D

i'm still using my stock cooler as well, although it is in an antec 300, so 2 large fans pulling air away, and have the cpu fan to stay at 100%
also, removed the thermal pad from the cooler and lapped/used artic silver 5 so possibly a degree or two improvement from that

total system just in case something else that i'm not seeing is a factor:
cpu- e5200 oc'd to 3.125
motherboard- gigabyte G31m-Es2l
memory- 4gb ocz fatal1ty pc2 6400
psu- antec earthwatts 500w
hdd- hitachi 1tb SATA
dvd- external
video card- geforce 8800gs
 

torrent

New Member
Joined
Apr 14, 2009
Messages
25 (0.00/day)
Location
Georgetown, Penang, Malaysia
System Name Dark Knight
Processor Intel Pentium Dual Core E5200 (3.45GHz@300*11.5)
Motherboard Gigabyte G31M-ES2L
Cooling Cooler Master Hyper TX2 | 120mm front intake fan | 120mm side fan | 80mm rear fan
Memory Corsair XMS2 2GB * 2
Video Card(s) Sapphire Radeon HD4830 512MB
Storage WD Caviar Green 500GB SATA HDD | Maxtor 160GB IDE HDD
Display(s) Dell E228WFP (1680*1050)
Case PowerLogic Modena GTX2000 casing
Audio Device(s) On-board 8CH Realtek HD Audio
Power Supply AcBel E2 Power 510W
i'm still using my stock cooler as well, although it is in an antec 300, so 2 large fans pulling air away, and have the cpu fan to stay at 100%
also, removed the thermal pad from the cooler and lapped/used artic silver 5 so possibly a degree or two improvement from that

total system just in case something else that i'm not seeing is a factor:
cpu- e5200 oc'd to 3.125
motherboard- gigabyte G31m-Es2l
memory- 4gb ocz fatal1ty pc2 6400
psu- antec earthwatts 500w
hdd- hitachi 1tb SATA
dvd- external
video card- geforce 8800gs

Medros, again thank you very much for the sharing, very much appreciated.

I guess the good air ventilation of Antec 300 does help a lot in reducing temp (i never see any Antec casing around here though).

My idle temp is still always at 52 C and peak temp at 72 C, running at 3.4 GHz now (272 * 12.5, stock voltage of 1.25V in BIOS) Btw, i fixed the big variance of voltage between BIOS and CPU-Z after updating BIOS again, variance is about 0.05V now (thanks to Innocent!!!)

I will try to look for CPU cooler with good price, and also may be mod the casing to improve air ventilation, will do that during the weekend :D



***Just curious to know, how bad will idle temp of 52 C and peak temp of 72 C impact the lifespan of my E5200??
 

Attachments

  • CPU-Z.jpg
    CPU-Z.jpg
    44.8 KB · Views: 356

miloshs

New Member
Joined
Jun 22, 2008
Messages
362 (0.06/day)
Location
Serbia
System Name Begginer's E
Processor Intel E8500
Motherboard DFI LT X48-T2R
Cooling Thermalright HR-01 Plus & Silverstone FM-121B (800-2400rpm)
Memory 2x2gb GEIL Ultra Plus PC8500 CL5
Video Card(s) Sapphire HD5850 1gb
Storage WD 1tb Black Series
Display(s) ASUS VW242HS 24"
Case CoolerMaster 690
Audio Device(s) ICH8 integrated crappie
Power Supply OCZ 700W xStream SLI PSU
Software Windows 7 x64
Ha ha got that right, was way to hot too, computer crashed running super pi 1 million.

3.3 is my 24/7 over clock :) @1.36 volts

Whats the VID for your CPU in Core Temp?
 

JrRacinFan

Served 5k and counting ...
Joined
Mar 17, 2007
Messages
20,073 (3.23/day)
Location
Youngstown, OH
System Name Dual Build Streamer
Processor Ryzen 7900x3d : Ryzen 4600G
Motherboard AsRock B650E Steel Legend : Giga B450i Aorus
Cooling Custom Water 1x420 : Stock
Memory 32GB T-Force Deltas : 16GB Dominator Platinums
Video Card(s) PowerColor 7900 XTX Liquid Devil: iGPU
Storage 20+ TB
Display(s) Sammy 49" 5k Ultrawide
Case Custom White Painted Phanteks Enthoo Pro 2
Audio Device(s) Onboard : Onboard
Power Supply EVGA 1200W P2
Mouse Corsair M65 RGB Elite White
Keyboard Hyperx Origins 65
Software Windows 10
Heya torrent,

Another quick tip, if you dont use Realtemp, download it and try it out. I have a feeling those temps you are reporting are false. The lifespan of the cpu will be shortened but by the time that it happens to die odds are you have moved onto a different setup. :)
 

torrent

New Member
Joined
Apr 14, 2009
Messages
25 (0.00/day)
Location
Georgetown, Penang, Malaysia
System Name Dark Knight
Processor Intel Pentium Dual Core E5200 (3.45GHz@300*11.5)
Motherboard Gigabyte G31M-ES2L
Cooling Cooler Master Hyper TX2 | 120mm front intake fan | 120mm side fan | 80mm rear fan
Memory Corsair XMS2 2GB * 2
Video Card(s) Sapphire Radeon HD4830 512MB
Storage WD Caviar Green 500GB SATA HDD | Maxtor 160GB IDE HDD
Display(s) Dell E228WFP (1680*1050)
Case PowerLogic Modena GTX2000 casing
Audio Device(s) On-board 8CH Realtek HD Audio
Power Supply AcBel E2 Power 510W
Heya torrent,

Another quick tip, if you dont use Realtemp, download it and try it out. I have a feeling those temps you are reporting are false. The lifespan of the cpu will be shortened but by the time that it happens to die odds are you have moved onto a different setup. :)


Thanks JR! Yes, i use Real Temp 3.00. (TJ Max set to 100) temp reading is identical with that of Core Temp and Everest.

I am running at 3.4GHz (1.25V), and seems like OC does not affect the temp much. So i guess the biggest problem is the poor air ventilation inside case, and also the CPU cooler.

Will try to do some mod to the case during weekend, might clean and reapply the stock CPU cooler as well and see if it help :)
 
Joined
Jan 2, 2009
Messages
9,899 (1.78/day)
Location
Essex, England
System Name My pc
Processor Ryzen 5 3600
Motherboard Asus Rog b450-f
Cooling Cooler master 120mm aio
Memory 16gb ddr4 3200mhz
Video Card(s) MSI Ventus 3x 3070
Storage 2tb intel nvme and 2tb generic ssd
Display(s) Generic dell 1080p overclocked to 75hz
Case Phanteks enthoo
Power Supply 650w of borderline fire hazard
Mouse Some wierd Chinese vertical mouse
Keyboard Generic mechanical keyboard
Software Windows ten
Thanks JR! Yes, i use Real Temp 3.00. (TJ Max set to 100) temp reading is identical with that of Core Temp and Everest.

I am running at 3.4GHz (1.25V), and seems like OC does not affect the temp much. So i guess the biggest problem is the poor air ventilation inside case, and also the CPU cooler.

Will try to do some mod to the case during weekend, might clean and reapply the stock CPU cooler as well and see if it help :)


I need 1.38 volts in CPUZ for 3.3ghz :(
 

torrent

New Member
Joined
Apr 14, 2009
Messages
25 (0.00/day)
Location
Georgetown, Penang, Malaysia
System Name Dark Knight
Processor Intel Pentium Dual Core E5200 (3.45GHz@300*11.5)
Motherboard Gigabyte G31M-ES2L
Cooling Cooler Master Hyper TX2 | 120mm front intake fan | 120mm side fan | 80mm rear fan
Memory Corsair XMS2 2GB * 2
Video Card(s) Sapphire Radeon HD4830 512MB
Storage WD Caviar Green 500GB SATA HDD | Maxtor 160GB IDE HDD
Display(s) Dell E228WFP (1680*1050)
Case PowerLogic Modena GTX2000 casing
Audio Device(s) On-board 8CH Realtek HD Audio
Power Supply AcBel E2 Power 510W
I need 1.38 volts in CPUZ for 3.3ghz :(

Panther, as you can see from the screenshot, my CPu-Z voltage is at 1.20V (0.05V lower than the voltage i set in BIOS). and i set +0.1V for DDR2 and +0.1V for FSB.
 

Attachments

  • CPU-Z_3.40GHz.jpg
    CPU-Z_3.40GHz.jpg
    44.7 KB · Views: 361
Joined
Jan 2, 2009
Messages
9,899 (1.78/day)
Location
Essex, England
System Name My pc
Processor Ryzen 5 3600
Motherboard Asus Rog b450-f
Cooling Cooler master 120mm aio
Memory 16gb ddr4 3200mhz
Video Card(s) MSI Ventus 3x 3070
Storage 2tb intel nvme and 2tb generic ssd
Display(s) Generic dell 1080p overclocked to 75hz
Case Phanteks enthoo
Power Supply 650w of borderline fire hazard
Mouse Some wierd Chinese vertical mouse
Keyboard Generic mechanical keyboard
Software Windows ten
!

You may be able to get an impressive over clock if you can have voltages that low for that speed.
 
Top