E5200 OC/BenchMark Thread.(56k warning)

_jM · May 17, 2009

to go along with Jr's comment. I see that your using 4x1gb sticks. Just a little FYI, I seem to achieve better and i mean alot better results for benching and OCing when I just use 2 sticks of RAM. Try and take out 2 sticks and clock the hell out of that chip. Also, Im pretty sure you can OC your RAM better with just 2 sticks in too

It cant hurt to try

pantherx12 · May 17, 2009

It be a bit pointless having a 24/7 stable nice over clock but having 2 gb less ram.

I run a lot of things at once XD

Typically using 3 gigs of ram.

Cheers for advice though, to JR, what is this CL stuff?

_jM · May 17, 2009

no no i ment for benches and heavy OCs.. not 24/7

CL= cas latency

pantherx12 · May 18, 2009

Ha ha, by stock they are 9-9-9-24 ( Am I missing a 9 ? I can't remember )

I can't get them past 8 no matter what fiddling I do D:

In terms of a 24/7 OC, I'd like 3.6 ideally what voltages would you recommend as safe and pretty long lasting?

( thinking at least 3 years here)

JrRacinFan · May 18, 2009

pantherx12 said:
Ha ha, by stock they are 9-9-9-24 ( Am I missing a 9 ? I can't remember )

I can't get them past 8 no matter what fiddling I do D:

In terms of a 24/7 OC, I'd like 3.6 ideally what voltages would you recommend as safe and pretty long lasting?

( thinking at least 3 years here)

OK time to start lowering sub timings if you cant get a stable CL8. Download Memset
http://www.xtremesystems.org/forums/showthread.php?t=92190

And fiddle away. By lowering the timings too much it will just cause lockups or BSODs. Just force a poweroff and once you power back on your CMOS settings will kick in and reset your ram.

Error 404 · May 18, 2009

Small announcement, I've finally gotten annoyed enough at my PC's noise to remove some fans.
I've taken off the CPU fan and clocked it down to 3.33 GHz.
Thats 266 MHz FSB, stock volts, it is stable and even with it running passive (I've now only got two 120mm (case + PSU) fans for extraction, a 92mm for input) it never gets above 50 degrees.

And a slight update is that I've had to put the stupid 40m fan back on my NB. Laaaame, its as noise as an angry bee...

Anyone got any ideas on how to make my NB cool and quiet? I've not raised the volts, but it gets very hot.

Paintface · Jun 10, 2009

Running at 3.7ghz now at 1.35v 60Cmax on load.

Had it at 3.8ghz, orthos was stable for 1 hour, but under L4D it crashed, i guess 3.7ghz isnt too bad cause i dont think i should go higher than the current voltage.

InnocentCriminal · Jun 10, 2009

That's an awesome OC 3.7 - nicely done!

pantherx12 · Jun 10, 2009

never mind downloaded wrong one.

raytunny · Jun 21, 2009

No luck at all with R0 stepping

I can't seem to overclock my E5200 R0 at all

I'm using a Gigabyte P35C-DS3R Rev 2.1 and looking at the support list it has the E5200 M0 stepping and the E5300 R0 on it but not the E5200 R0 :confused:

Has anyone here managed to overclock the R0 stepping E5200 on this board, I'm using the F21E BIOS which seems to be the latest.

My E6300 I could overclock but only to 3.0 that's why I got one of these. I can underclock it but anything that should increase the speed fails. With my Arctic Freezer 7 Pro heat certainly isn't a problem as it's running at 34-35C. I'm definitely at a dead end :banghead:

Any help would be really appreciated

JrRacinFan · Aug 2, 2009

Sorry ray this is actually the first I've seen your post.

Just for sh*ts n giggles, try 266 fsb and 9.5 multi leaving everything at stock.

raytunny · Aug 4, 2009

Hi, thanks for the reply. In betweentimes I have got myself a fresh motherboard, I now have an Asus P5Q-E instead of the Gigabyte P35C-DS3R and this one definitely recognizes my R0 stepping E5200 cpu. I did what you said and all went OK. I even gave it a go with the multiplier on 12.5 and the FSB at 266, so it will overclock. The only thing is it's all different with the Asus than it was with the Gigabyte. All my previous overclocking was with Athlons and Opterons and I never went near voltages, which seems a bit scary, especially when you aren't sure what you're doing, like me. Now I know it will overclock I'll have to study what all these overclocking tools on this mobo are for.
Now I've got it up to 3.3 at 60*C to TJMax I suppose there is still plenty of room for improvement. Thanks again, and any suggestions will be welcome.

Rev_Pizzaguy · Nov 7, 2009

Hmm... add me!? 4.16GHz at 333x12.5 running 1.36v!

http://valid.canardpc.com/show_oc.php?id=811007

Rev_Pizzaguy · Nov 9, 2009

Add Me!

Sorry for the double-post, forgot to put "Add Me" in title, so here goes!

4.16GHz at 333x12.5 running 1.36v

http://valid.canardpc.com/show_oc.php?id=811007

Rev_Pizzaguy · Nov 11, 2009

Here's 3.66GHz running stable. SuperPI 1M of 15.257s.

http://forums.techpowerup.com/attachment.php?attachmentid=30513&stc=1&d=1257914204

System Name	The money pit v.2 (v.1 is the wife!)
Processor	Core2Quad-Q9550@3.9ghz/1860mhzFSB @1.344v
Motherboard	ASUS Maximus II Formula = best damn P45 OCer out there!
Cooling	CoolerMster V8-- Custom WC system on the way! =]
Memory	8GB DOMINATORS @1100mhz 5-5-5-18
Video Card(s)	EVGA GTX 280
Storage	150GB WesternDigital Velociraptor OS Drive/1 WD 500AAKS for Storage
Display(s)	SAMSUNG 2243SWX 22" LCD
Case	Cooler Master Cosmos S w/custom lighting and cable management
Audio Device(s)	X-Fi Titanium (Fatality edition) - paired with RAZER Barracuda's
Power Supply	CORSAIR HX1000W modular PSU
Software	Windows 7 RC 7100--eats vista for breakfast lunch and dinner!
Benchmark Scores	Coming to a theater near you!

System Name	My pc
Processor	Ryzen 5 3600
Motherboard	Asus Rog b450-f
Cooling	Cooler master 120mm aio
Memory	16gb ddr4 3200mhz
Video Card(s)	MSI Ventus 3x 3070
Storage	2tb intel nvme and 2tb generic ssd
Display(s)	Generic dell 1080p overclocked to 75hz
Case	Phanteks enthoo
Power Supply	650w of borderline fire hazard
Mouse	Some wierd Chinese vertical mouse
Keyboard	Generic mechanical keyboard
Software	Windows ten

System Name	The money pit v.2 (v.1 is the wife!)
Processor	Core2Quad-Q9550@3.9ghz/1860mhzFSB @1.344v
Motherboard	ASUS Maximus II Formula = best damn P45 OCer out there!
Cooling	CoolerMster V8-- Custom WC system on the way! =]
Memory	8GB DOMINATORS @1100mhz 5-5-5-18
Video Card(s)	EVGA GTX 280
Storage	150GB WesternDigital Velociraptor OS Drive/1 WD 500AAKS for Storage
Display(s)	SAMSUNG 2243SWX 22" LCD
Case	Cooler Master Cosmos S w/custom lighting and cable management
Audio Device(s)	X-Fi Titanium (Fatality edition) - paired with RAZER Barracuda's
Power Supply	CORSAIR HX1000W modular PSU
Software	Windows 7 RC 7100--eats vista for breakfast lunch and dinner!
Benchmark Scores	Coming to a theater near you!

System Name	My pc
Processor	Ryzen 5 3600
Motherboard	Asus Rog b450-f
Cooling	Cooler master 120mm aio
Memory	16gb ddr4 3200mhz
Video Card(s)	MSI Ventus 3x 3070
Storage	2tb intel nvme and 2tb generic ssd
Display(s)	Generic dell 1080p overclocked to 75hz
Case	Phanteks enthoo
Power Supply	650w of borderline fire hazard
Mouse	Some wierd Chinese vertical mouse
Keyboard	Generic mechanical keyboard
Software	Windows ten

System Name	Dual Build Streamer
Processor	Ryzen 7900x3d : Ryzen 4600G
Motherboard	AsRock B650E Steel Legend : Giga B450i Aorus
Cooling	Custom Water 1x420 : Stock
Memory	32GB T-Force Deltas : 16GB Dominator Platinums
Video Card(s)	PowerColor 7900 XTX Liquid Devil: iGPU
Storage	20+ TB
Display(s)	Sammy 49" 5k Ultrawide
Case	Custom White Painted Phanteks Enthoo Pro 2
Audio Device(s)	Onboard : Onboard
Power Supply	EVGA 1200W P2
Mouse	Corsair M65 RGB Elite White
Keyboard	Hyperx Origins 65
Software	Windows 10

E5200 OC/BenchMark Thread.(56k warning)

_jM

New Member

pantherx12

_jM

New Member

pantherx12

JrRacinFan

Served 5k and counting ...

Error 404

Paintface

New Member

InnocentCriminal

Resident Grammar Amender

pantherx12

raytunny

New Member

JrRacinFan

Served 5k and counting ...

raytunny

New Member

Rev_Pizzaguy

Rev_Pizzaguy

Rev_Pizzaguy

Attachments

System Name	QUACK
Processor	Intel i7 2600K (3.4 GHz, 8 threads)
Motherboard	Asus P67P8-V3
Cooling	Xigmatek Balder 120mm (4x120,1x140mm case)
Memory	Patriot 2 Viper Sector 5, 8GB DDR3 1600 MHz
Video Card(s)	Gigabyte GeForce GTX 960 G1 4GB
Storage	1x Samsung EVO 850 (500GB) SSD, 1x Fujitsu 256GB SSD
Display(s)	Dell Ultrasharp U2311h 23" (so sexy)
Case	CoolerMaster Gladiator RC-600
Audio Device(s)	Onboard 5.1
Power Supply	Antec 850w with yellow racing stripes
Software	Windows 7 HP 64 bit

Processor	E5200 @ 3.7ghz
Motherboard	DFI LanParty DK P35 DARK
Cooling	Zalman CPU + case cooling
Memory	OCZ Reaper HPC DDR2 4GB 1066
Video Card(s)	Saphire 4890 Vapor-X OCed
Storage	Raptor 74GB + 640GB sata + 1TB sata ( all WD)
Display(s)	BENQ 24inch LCD 1080p
Case	my desk
Audio Device(s)	Creative Audigy 2 ZS
Power Supply	OCZ gameXstream 700w
Software	Windows 7 x64 ultimate

System Name	BeeR 6
Processor	Intel Core i7 3770K*
Motherboard	ASUS Maximus V Gene (1155/Z77)
Cooling	Corsair H100i
Memory	16GB Samsung Green 1600MHz DDR3**
Video Card(s)	4GB MSI Gaming X RX480
Storage	256GB Samsung 840 Pro SSD
Display(s)	27" Samsung C27F591FDU
Case	Fractal Design Arc Mini
Power Supply	Corsair HX750W
Software	64bit Microsoft Windows 10 Pro
Benchmark Scores	@ 4.6GHz *@ 2133MHz

Processor	E5200
Motherboard	Asus P5Q-E
Cooling	Arctic Freezer 7 Pro
Memory	2x2GB OCZ PC6400 with Crucial RAM cooler
Video Card(s)	Geforce 9600GT 1024MB
Storage	1TB Samsung 32MB Cache SATAII
Display(s)	17" LG Flatron L1710B
Case	Thermaltake Soprano with 2x120mm fans and 1 80mm
Power Supply	Hiper Type R 730 Watts
Benchmark Scores	Zilch!

Processor	Intel i5-11600K
Motherboard	ASRock H570M Pro4
Cooling	Thermalright Assassin King 120
Memory	32GB (2x16GB) Silicon Power Zenith DDR4 3200 @ DDR4 3600 C16
Video Card(s)	Gigabyte RTX 3060 Ti Gaming OC 8GB
Storage	PNY CS3140 1TB PCIe 4.0
Display(s)	Dell P2422HE 24" @ 75Hz
Case	Fractal Core 3000 USB 3.0
Audio Device(s)	Creative T20 Series II
Power Supply	EVGA 650 GQ 80+ Gold
Keyboard	Redragon K589
Benchmark Scores	https://www.3dmark.com/spy/33021442