- Joined
- Jun 11, 2007
- Messages
- 192 (0.03/day)
Processor | i7-3770K @ 45x100 |
---|---|
Motherboard | P8Z77-V Pro |
Cooling | Noctua NH-D14 |
Memory | G.SKILL Ripjaws X Series (2 x 8GB) DDR3 1600/F3-1600C9D-16GXM |
Video Card(s) | Onboard HD4000 |
Storage | Vertex 4 128 GB + other HDDs |
Case | P183 |
Power Supply | Seasonic SS-560KM |
I'm not looking for an extreme overclock w/ the E6500. I'm tuning 10.5x333 right now and think that I have it stable but I'm wondering about my GTL settings. Should I be adjusting these down to 0.63x on the two CPU settings and leave the NB @ 0.67x? This is what I'm seeing in some posts with the P45 and a 45nm dual core chip. The stock GTL settings are 0.67x for all three.
Settings:
Settings:
CPU: E6500 @ 10.5x333= 3,496 MHz, VID is 1.2875 and am using a +50 mV
MB: BI-P45-T2R using BIOS B245D914
Vcc (CPU-Z) = 1.296 V (load) and 1.136 V (idle)
Vtt=1.18 V
NB=1.1950 V
Using the 266/800 strap (1001 MHz on the memory)
GTL-CPU1 - 0.63x
GTL-CPU2 - 0.63x
GTL-NB - 0.67x
Memory: Corsair Dominator (2 x 2GB) DDR2 1066 (PC2 8500)
5-6-6-18 @ 1,001 CMD4GX2M2A1066C5
PSU: Corsair 400 W