- Joined
- Apr 10, 2010
- Messages
- 1,831 (0.36/day)
- Location
- London
System Name | Jaspe |
---|---|
Processor | Ryzen 1500X |
Motherboard | Asus ROG Strix X370-F Gaming |
Cooling | Stock |
Memory | 16Gb Corsair 3000mhz |
Video Card(s) | EVGA GTS 450 |
Storage | Crucial M500 |
Display(s) | Philips 1080 24' |
Case | NZXT |
Audio Device(s) | Onboard |
Power Supply | Enermax 425W |
Software | Windows 10 Pro |
This is the missus pc; I was browsing the internet this morning when I had a BSOD, rebooted and since then the multiplier is stuck at 6x. I was using this settings when the BSOD happened: 375x9 = 3375mhz (stock voltage, stock heatsink), ram at 900mhz. This was my first pc, I built it three years ago so I'm familiar with it. C1E was enabled but EVEN WHEN DISABLED it doesn't make a difference. The board is a GA-P31-DS3L with 2Gb of Corsair memory and Antec Signature 650w. I loaded optimized default and cleared the CMOS but still the multiplier is stuck at 6x (2000mhz); the voltage seems to be stuck at 1.10v too. I run the cpu test in 3DMARK11, prime95, OCCT ... the cpu is always running at 2000mhz; Any ideas? Did you experience this? Thanks in advance.