• We've upgraded our forums. Please post any issues/requests in this thread.

ECS May Enter the High-end Motherboard Market

malware

New Member
Joined
Nov 7, 2004
Messages
5,422 (1.13/day)
Likes
954
Location
Bulgaria
Processor Intel Core 2 Quad Q6600 G0 VID: 1.2125
Motherboard GIGABYTE GA-P35-DS3P rev.2.0
Cooling Thermalright Ultra-120 eXtreme + Noctua NF-S12 Fan
Memory 4x1 GB PQI DDR2 PC2-6400
Video Card(s) Colorful iGame Radeon HD 4890 1 GB GDDR5
Storage 2x 500 GB Seagate Barracuda 7200.11 32 MB RAID0
Display(s) BenQ G2400W 24-inch WideScreen LCD
Case Cooler Master COSMOS RC-1000 (sold), Cooler Master HAF-932 (delivered)
Audio Device(s) Creative X-Fi XtremeMusic + Logitech Z-5500 Digital THX
Power Supply Chieftec CFT-1000G-DF 1kW
Software Laptop: Lenovo 3000 N200 C2DT2310/3GB/120GB/GF7300/15.4"/Razer
#1
Elitegroup Computer System (ECS) will change its motherboard strategy this year to focus on more higher-end products, according to Digitimes citing sources at motherboard makers. Due to limited growth in the entry-level market, ECS has recently changed some of its PCB and port layouts to suit higher-end markets while also adding unique functions to its motherboards. With the changes, the company expects to grab a modest share in the mid-range and high-end markets. In a few words we might have new high-end motherboards soon from ECS, which is all good for us.

Show full news post
 
Joined
May 19, 2007
Messages
7,662 (1.98/day)
Likes
536
Location
c:\programs\kitteh.exe
Processor C2Q6600 @ 1.6 GHz
Motherboard Anus PQ5
Cooling ACFPro
Memory GEiL2 x 1 GB PC2 6400
Video Card(s) MSi 4830 (RIP)
Storage Seagate Barracuda 7200.10 320 GB Perpendicular Recording
Display(s) Dell 17'
Case El Cheepo
Audio Device(s) 7.1 Onboard
Power Supply Corsair TX750
Software MCE2K5
#2
no thank you
 

Paulieg

The Mad Moderator
Joined
Feb 19, 2007
Messages
11,960 (3.03/day)
Likes
2,846
Location
Wherever I can find the iron.
Processor Haswell i7 4770K
Motherboard Gigabyte z79 UD5H Black Edition
Cooling Cryorig R1 Ultimate
Memory Gskill Trident DDR3 2400
Video Card(s) Asus 7970 Direct CU II
Storage Kingston Hyper Fury 240 SSD/ WD Black 640GB
Case Fractal Design R5
Power Supply XFX 650w
Software Win 7/Win 10 Tech preview
#3
Well, it would be good for the consumer IF they actually put out some quality boards. They don't have the greatest reputation, and high end does not equal quality.
 

btarunr

Editor & Senior Moderator
Staff member
Joined
Oct 9, 2007
Messages
34,335 (9.23/day)
Likes
17,427
Location
Hyderabad, India
System Name Long shelf-life potato
Processor Intel Core i7-4770K
Motherboard ASUS Z97-A
Cooling Xigmatek Aegir CPU Cooler
Memory 16GB Kingston HyperX Beast DDR3-1866
Video Card(s) 2x GeForce GTX 970 SLI
Storage ADATA SU800 512GB
Display(s) Samsung U28D590D 28-inch 4K
Case Cooler Master CM690 Window
Audio Device(s) Creative Sound Blaster Recon3D PCIe
Power Supply Corsair HX850W
Mouse Razer Abyssus 2014
Keyboard Microsoft Sidewinder X4
Software Windows 10 Pro Creators Update
#4
It could be put as "..may re-enter the high-end market". Honestly in the past they did make high-end boards in the hay-days of the AMD K8. In fact the PT-88 based on a SiS chipset was a good performing LGA 775 board, I ended up with a dead KN1 Extreme but that was pretty high-end. While they kept things low-priced they also made an illusion of their products not being really 'high-end', more of mid-high but the truth was they were.
 
Joined
Aug 10, 2007
Messages
4,059 (1.07/day)
Likes
1,123
Location
Geneva, FL, USA
Processor Intel i5-6600
Motherboard ASRock H170M-ITX
Cooling Cooler Master Geminii S524
Memory G.Skill DDR4-2133 16GB (8GB x 2)
Video Card(s) Gigabyte R9-380X 4GB
Storage Samsung 950 EVO 250GB (mSATA)
Display(s) LG 29UM69G-B 2560x1080 IPS
Case Lian Li PC-Q25
Audio Device(s) Realtek ALC892
Power Supply Seasonic SS-460FL2
Mouse Logitech G700s
Keyboard Logitech G110
Software Windows 10 Pro
#5
Worked for Foxconn.
 
Joined
Aug 9, 2006
Messages
1,003 (0.24/day)
Likes
156
System Name [Primary Workstation]
Processor Intel Core i7-920 Bloomfield @ 3.8GHz/4.55GHz [24-7/Bench]
Motherboard EVGA X58 E758-A1 [Tweaked right!]
Cooling Cooler Master V8 [stock fan + two 133CFM ULTRA KAZE fans]
Memory 12GB [Kingston HyperX]
Video Card(s) constantly upgrading/downgrading [prefer nVidia]
Storage constantly upgrading/downgrading [prefer Hitachi/Samsung]
Display(s) Triple LCD [40 inch primary + 32 & 28 inch auxiliary displays]
Case Cooler Master Cosmos 1000 [Mesh Mod, CFM Overload]
Audio Device(s) ASUS Xonar D1 + onboard Realtek ALC889A [Logitech Z-5300 Spk., Niko 650-HP 5.1 Hp., X-Bass Hp.]
Power Supply Corsair TX950W [aka Reactor]
Software This and that... [All software 100% legit and paid for, 0% pirated]
Benchmark Scores Ridiculously good scores!!!
#6
no thank you
I agree. ECS motherboards have some severe quality issues. I owned two ECS motherboards back in the day when I still used Intel platforms (so, we are talking 7+ years ago), and they were terrible, TERRIBLE, motherboards, as opposed to at least two dozen non-ECS motherboards that went through my hands since then. Hacky/poor quality drivers, BIOS bugs, poor quality capacitors, and the list goes on. From what I’ve read over the years, little has improved with ECS motherboards. As for high-end, ECS already has several “high-end” motherboards on the market.

For example: http://www.newegg.com/Product/Product.aspx?Item=N82E16813135024

Three guesses anyone, on why that motherboard in the link above has a “cooling duct” aka “Cooling Accelerator" (hey, don’t look at me, ECS made that term up) on top of the PWM controller. Tip: It ain’t just because they thought it looked cool.
 
Joined
May 19, 2007
Messages
7,662 (1.98/day)
Likes
536
Location
c:\programs\kitteh.exe
Processor C2Q6600 @ 1.6 GHz
Motherboard Anus PQ5
Cooling ACFPro
Memory GEiL2 x 1 GB PC2 6400
Video Card(s) MSi 4830 (RIP)
Storage Seagate Barracuda 7200.10 320 GB Perpendicular Recording
Display(s) Dell 17'
Case El Cheepo
Audio Device(s) 7.1 Onboard
Power Supply Corsair TX750
Software MCE2K5
#7
overly warm?
 
Joined
Apr 5, 2005
Messages
6,571 (1.42/day)
Likes
1,164
Location
Republic of Asia (a.k.a Irvine), CA
System Name Red Spy
Processor FX 8350 @ 4.35 Ghz with 1.28v
Motherboard Gigabyte 990FX-UD3 v4.0
Cooling TT Water 3.0 Performer + 2 x Cougar 120mm fan, 1 x 120mm Blue LED, 1 x 200 mm Red LED fan
Memory Kingston HyperX DDR3 1333 16GB
Video Card(s) Asus R9 290 OC @ GPU - 1050, MEM - 1300
Storage ADATA 128GB Sata III SSD for OS, WDC Black - 1TB Storage, OCZ Vertex 3 120GB SSD - Games
Display(s) AOC 23" 1080P LCD
Case AeroCool XPredator X3
Audio Device(s) Built-in Realtek
Power Supply Corsair HX1000 Modular
Software Windows 7 Ultimate 64 bit
Benchmark Scores BF4 with Mantle on Ultra settings gets around 60 FPS.
#8
I agree. ECS motherboards have some severe quality issues. I owned two ECS motherboards back in the day when I still used Intel platforms (so, we are talking 7+ years ago), and they were terrible, TERRIBLE, motherboards, as opposed to at least two dozen non-ECS motherboards that went through my hands since then. Hacky/poor quality drivers, BIOS bugs, poor quality capacitors, and the list goes on. From what I’ve read over the years, little has improved with ECS motherboards. As for high-end, ECS already has several “high-end” motherboards on the market.

For example: http://www.newegg.com/Product/Product.aspx?Item=N82E16813135024

Three guesses anyone, on why that motherboard in the link above has a “cooling duct” aka “Cooling Accelerator" (hey, don’t look at me, ECS made that term up) on top of the PWM controller. Tip: It ain’t just because they thought it looked cool.

Even MSI have those small heatsinks on their mid-range boards. Just a thought.
 

WarEagleAU

Bird of Prey
Joined
Jul 9, 2006
Messages
10,809 (2.59/day)
Likes
529
Location
Gurley, AL
System Name Boddha Getta Boddha Getta Bah!
Processor AMD FX 6100 @ 4.432Ghz @1.382
Motherboard ASUS M5A99X EVO AMD 990X AMD SB950
Cooling Custom Water. EK 240MM Kit, Supreme HSF - Runs 35C
Memory 2 x 4GB Corsair Vengeance White LP @ 1.35V
Video Card(s) XFX Radeon HD 6870 980/1100
Storage WD Caviar Black 1.0TB, WD Caviar Green 1.0TB, WD 160GB
Display(s) Asus VH222/S 22: (21.5" Viewable) 1920x1080p HDMI LCD Monitor
Case NZXT White Switch 810
Audio Device(s) Onboard Realtek 5.1
Power Supply NZXT Hale 90 Gold Cert 750W Modular PSU
Software Windows 8.1 Profession 64 Bit
#9
Just precautionary. ECS makes decent mobos, though Ive never used them personally. A few friends have.
 
Joined
Jan 22, 2007
Messages
538 (0.14/day)
Likes
64
Location
Round Rock, TX
System Name Teh Beast
Processor 8700k @ 4.8
Motherboard Gigabyte Z370 Gaming 5
Cooling Corsair H110i
Memory 16GB G.Skill Flare X @ 3466
Video Card(s) EVGA GTX 1080 TI
Storage Samsung 960 Evo 500GB + Samsung 850 Evo 1TB
Display(s) Asus Swift
Case Corsair Air 740
Power Supply Corsair AX860
Software WIndows 10 Pro
#10
I used an ECS motherboard in my parent's computer i built for them about 5 years ago, still running strong.
 

Demos_sav

New Member
Joined
Aug 26, 2006
Messages
870 (0.21/day)
Likes
42
Location
Cyprus
Processor Intel P4 519K LGA775 3.06GHz @ 3.82GHz
Motherboard ASUS P5WD2
Cooling Arctic Cooling Freezer 7 Pro
Memory 3GB Kingston Hyper-X DDR2 3-4-3-6 @667MHz
Video Card(s) XFX 8800 GTS 320MB XXX Edition @ 630/970
Storage Samsung 160GB SATA2 7200RPM 8MB
Display(s) SONY SDM HS75 17' LCD
Case Interset (black)
Audio Device(s) Realtek HD ALC882 8-channel onboard
Power Supply Thermaltake Toughpower 750W
Software Windows XP Home edition 32bit fully tuned
Benchmark Scores 3dm01-29689 3dm03-31099 3dm05-10298 3dm06-6409
#11

Shyska

New Member
Joined
Sep 7, 2005
Messages
158 (0.04/day)
Likes
16
Processor AMD Athlon64 3000+ Venice @2.5GHz
Motherboard Asus A8N-E :(this board limits my cpu overclock ):
Cooling CPU box, GPU Zalman VF700-Cu
Memory 2x512MB PC3200 @227MHz
Video Card(s) Sapphire X850XT 256MB PCI-E @ 605/618
Storage 40GB & 120GB Maxtors
Power Supply Generic 400W
Software Windows XP Pro SP2 | Debian GNU/Linux <sarge>
#12
I had one ECS board with stability issues at stock and one with failed onboard audio (in a less than a year). 2 MSI boards that were dead even before unwraping and 1 asus board with bad chipset cooler. I would buy ASUS anytime, wouldn't buy MSI if i had other choise, but i wouldn't even look at ECS... :shadedshu
 
Joined
Jan 15, 2005
Messages
5,458 (1.16/day)
Likes
242
Location
England
System Name Jimmy 2004's PC
Processor S754 AMD Athlon64 3200+ @ 2640MHz
Motherboard ASUS K8N
Cooling AC Freezer 64 Pro + Zalman VF1000 + 5x120mm Antec TriCool Case Fans
Memory 1GB Kingston PC3200 (2x512MB)
Video Card(s) Saphire 256MB X800 GTO @ 450MHz/560MHz (Core/Memory)
Storage 500GB Western Digital SATA II + 80GB Maxtor DiamondMax SATA
Display(s) Digimate 17" TFT (1280x1024)
Case Antec P182
Audio Device(s) Audigy 4 + Creative Inspire T7900 7.1 Speakers
Power Supply Corsair HX520W
Software Windows XP Home
#13
When I killed my old K8N I bought an ECS mobo - boy was that a mistake. It was truly terrible - pushing up the FSB by just a few MHz would corrupt my hard drive. More competition is good, but I've never personally going to buy an ECS motherboard again.

That ECS was so awful I went on ebay and bought a new K8N from there instead...
 
Joined
Apr 30, 2005
Messages
164 (0.04/day)
Likes
4
#14
Lol I was at NCIX picking up Crysis when I saw this kid(techy) pushing his friend(tech newb) to buy an ECS motherboard because it was cheap and reportedly reliable by his standards.

This conversation then caught the attention of another (hardcore techy) who interrupted them and recommended with sincerity to not touch the ECS mobo with a 10 foot stick.

ECS seems to have a wierd reputation as I had an Athlon 1Ghz go non stop 24hrs a day for 5 yrs using an ECS mobo where as my friend tells me never to touch an ECS product because he is on his 5th ECS Mobo replacement.

Luck of the draw it seems:p

Couldn't say it better
 
Joined
Apr 5, 2005
Messages
6,571 (1.42/day)
Likes
1,164
Location
Republic of Asia (a.k.a Irvine), CA
System Name Red Spy
Processor FX 8350 @ 4.35 Ghz with 1.28v
Motherboard Gigabyte 990FX-UD3 v4.0
Cooling TT Water 3.0 Performer + 2 x Cougar 120mm fan, 1 x 120mm Blue LED, 1 x 200 mm Red LED fan
Memory Kingston HyperX DDR3 1333 16GB
Video Card(s) Asus R9 290 OC @ GPU - 1050, MEM - 1300
Storage ADATA 128GB Sata III SSD for OS, WDC Black - 1TB Storage, OCZ Vertex 3 120GB SSD - Games
Display(s) AOC 23" 1080P LCD
Case AeroCool XPredator X3
Audio Device(s) Built-in Realtek
Power Supply Corsair HX1000 Modular
Software Windows 7 Ultimate 64 bit
Benchmark Scores BF4 with Mantle on Ultra settings gets around 60 FPS.
#16
When I killed my old K8N I bought an ECS mobo - boy was that a mistake. It was truly terrible - pushing up the FSB by just a few MHz would corrupt my hard drive. More competition is good, but I've never personally going to buy an ECS motherboard again.

That ECS was so awful I went on ebay and bought a new K8N from there instead...
Did you buy a Via chipset board? K8M800? If so yes it will corrupt files if you push the FSB because its not locked. Its not ECS, its the chipset. If so any board manufacturer would be the same. So don't complian.
 
Joined
Apr 5, 2005
Messages
6,571 (1.42/day)
Likes
1,164
Location
Republic of Asia (a.k.a Irvine), CA
System Name Red Spy
Processor FX 8350 @ 4.35 Ghz with 1.28v
Motherboard Gigabyte 990FX-UD3 v4.0
Cooling TT Water 3.0 Performer + 2 x Cougar 120mm fan, 1 x 120mm Blue LED, 1 x 200 mm Red LED fan
Memory Kingston HyperX DDR3 1333 16GB
Video Card(s) Asus R9 290 OC @ GPU - 1050, MEM - 1300
Storage ADATA 128GB Sata III SSD for OS, WDC Black - 1TB Storage, OCZ Vertex 3 120GB SSD - Games
Display(s) AOC 23" 1080P LCD
Case AeroCool XPredator X3
Audio Device(s) Built-in Realtek
Power Supply Corsair HX1000 Modular
Software Windows 7 Ultimate 64 bit
Benchmark Scores BF4 with Mantle on Ultra settings gets around 60 FPS.
#17
Lol I was at NCIX picking up Crysis when I saw this kid(techy) pushing his friend(tech newb) to buy an ECS motherboard because it was cheap and reportedly reliable by his standards.

This conversation then caught the attention of another (hardcore techy) who interrupted them and recommended with sincerity to not touch the ECS mobo with a 10 foot stick.

ECS seems to have a wierd reputation as I had an Athlon 1Ghz go non stop 24hrs a day for 5 yrs using an ECS mobo where as my friend tells me never to touch an ECS product because he is on his 5th ECS Mobo replacement.

Luck of the draw it seems:p
Just to add more.

Its like asking a reindeer to pull a coach (pulled by Horses). So set it and forget it. Don't change any settings it will do what it promised to do.
 
Joined
Jan 23, 2006
Messages
1,455 (0.33/day)
Likes
43
Location
The 13th room on the 13th floor of the 13th buildi
Processor custom dupont risk chip cpu prototype
Motherboard custom ibm x5 solid state carbon mainboard
Cooling industrial technologies prototype dupont custom heat transfer unit
Memory 6x 2gig prototype ecc hnc ddr4
Video Card(s) prototype low energy version nvidia 9 series unnumberd card
Storage 1tb solid state hdd
Display(s) 44 inch samsung plasma screen tv/monitor
Case custom ibm mobile home server case
Audio Device(s) custom Yamaha sound processing processor in spm format
Power Supply 1200watt deli cord custom made dupont type psu
Software sun unix/windows type v
#18
unless ECS create a new brand or produce High end boards for oem vendor machines I can't see ECS making much of a dent in the high end market.
 
Joined
Jan 15, 2005
Messages
5,458 (1.16/day)
Likes
242
Location
England
System Name Jimmy 2004's PC
Processor S754 AMD Athlon64 3200+ @ 2640MHz
Motherboard ASUS K8N
Cooling AC Freezer 64 Pro + Zalman VF1000 + 5x120mm Antec TriCool Case Fans
Memory 1GB Kingston PC3200 (2x512MB)
Video Card(s) Saphire 256MB X800 GTO @ 450MHz/560MHz (Core/Memory)
Storage 500GB Western Digital SATA II + 80GB Maxtor DiamondMax SATA
Display(s) Digimate 17" TFT (1280x1024)
Case Antec P182
Audio Device(s) Audigy 4 + Creative Inspire T7900 7.1 Speakers
Power Supply Corsair HX520W
Software Windows XP Home
#19
Did you buy a Via chipset board? K8M800? If so yes it will corrupt files if you push the FSB because its not locked. Its not ECS, its the chipset. If so any board manufacturer would be the same. So don't complian.
It was a VIA, I can't remember exactly which chipset, I've given the board away.

You might be right though, I'll cut ECS some slack, but either way I'm sticking to non-ECS and non-VIA boards for the time being!
 
Joined
Aug 9, 2006
Messages
1,003 (0.24/day)
Likes
156
System Name [Primary Workstation]
Processor Intel Core i7-920 Bloomfield @ 3.8GHz/4.55GHz [24-7/Bench]
Motherboard EVGA X58 E758-A1 [Tweaked right!]
Cooling Cooler Master V8 [stock fan + two 133CFM ULTRA KAZE fans]
Memory 12GB [Kingston HyperX]
Video Card(s) constantly upgrading/downgrading [prefer nVidia]
Storage constantly upgrading/downgrading [prefer Hitachi/Samsung]
Display(s) Triple LCD [40 inch primary + 32 & 28 inch auxiliary displays]
Case Cooler Master Cosmos 1000 [Mesh Mod, CFM Overload]
Audio Device(s) ASUS Xonar D1 + onboard Realtek ALC889A [Logitech Z-5300 Spk., Niko 650-HP 5.1 Hp., X-Bass Hp.]
Power Supply Corsair TX950W [aka Reactor]
Software This and that... [All software 100% legit and paid for, 0% pirated]
Benchmark Scores Ridiculously good scores!!!
#20
Quite probably more than just overly warm. The "Cooling Accelerator" introduces some additional thermal stability to that cluster of capacitors, caps that are surely way below the norm in terms of quality. This is ECS we are talking about. Because a 20 cent 40mm fan with 5 cent plastic shroud is heluva lot cheaper than proper components. Simple as that. They can spout buzz-words and slam as many "This motherboard is high-end, it REALLY IS!" stickers on their boxes as they can, that won't change reality.

I got to give them points in the marketing/buzz-word department. "Cooling Accelerator" is genius. I mean, its better than: "This fan is here because we used the same poor quality components we use in our value-line of motherboards, aka 'all of em', and it will make sure your motherboard doesn’t explode the first time you try to over-volt your CPU." Heluva lot shorter too.
 
Joined
Oct 7, 2006
Messages
1,335 (0.33/day)
Likes
90
Processor e8200 3.93mhz@1.264v
Motherboard P5E3 Pro
Cooling Scythe Infinity
Memory 4gb of G.Skill Ripjaw 6-7-7-18@1404 and 1.62v
Video Card(s) HIS 5770 v2 940/1275mhz stock volts
Storage 1TB Hitachi
Display(s) Acer 22" Widescreen LCD
Case Blue Cooler Master Centurion
Audio Device(s) Onboard audio :(, and Klipsch 5.1 Pro Media's
Power Supply 650 Watt BFG
Software Vista 64 Ultimate
#21
I agree. ECS motherboards have some severe quality issues. I owned two ECS motherboards back in the day when I still used Intel platforms (so, we are talking 7+ years ago), and they were terrible, TERRIBLE, motherboards, as opposed to at least two dozen non-ECS motherboards that went through my hands since then. Hacky/poor quality drivers, BIOS bugs, poor quality capacitors, and the list goes on. From what I’ve read over the years, little has improved with ECS motherboards. As for high-end, ECS already has several “high-end” motherboards on the market.

For example: http://www.newegg.com/Product/Product.aspx?Item=N82E16813135024

Three guesses anyone, on why that motherboard in the link above has a “cooling duct” aka “Cooling Accelerator" (hey, don’t look at me, ECS made that term up) on top of the PWM controller. Tip: It ain’t just because they thought it looked cool.
I have one of those, it is not to bad of a motherboard. It hit 2.67ghz with a 3600brisbane and 3.15 with a 5000be. Not a super board, but not a bad one.
 
Joined
Jul 26, 2007
Messages
536 (0.14/day)
Likes
41
Location
Melbourne, Australia
System Name beast
Processor 3930K
Motherboard Gigabyte GA-X79-UD3
Cooling Noctua NH-U12P SE2011
Memory 16GB Kingston Value DDR3 1333Mhz CL9
Video Card(s) Sapphire 5870 1GB
Storage 1x 120GB Intel 520
Display(s) 3x X243BW@5760x1080
Case Antec P182
Power Supply Antec TruePower Trio 650
Software Windows 7 Ultimate 64
#22
heh, i skipped through the last half of comments, and i have to say regardless what the rest of the posts were, i have to go with i.r.a with this one.. No thanks!

even tho my personal experience with ecs products has been limited. i have not had a pleasent time using their graphics cards, and well i cant speak for the quality of their motherboards. i get the impression from the comments i have read thus far, that their motherboards arent any better then their gfx cards. you guys can say to me all you like that i couldve just gotten a doa product, ect ect.. rar rar.. imo ecs = shitty hardware
thankyou :laugh:
 

PVTCaboose1337

Graphical Hacker
Joined
Feb 1, 2006
Messages
9,501 (2.19/day)
Likes
1,097
Location
Dallas, Texas
System Name Whim
Processor Intel Core i5 2500k @ 4.4ghz
Motherboard Asus P8Z77-V LX
Cooling Cooler Master Hyper 212+
Memory 2 x 4GB G.Skill Ripjaws @ 1600mhz
Video Card(s) Gigabyte GTX 670 2gb
Storage Samsung 840 Pro 256gb, WD 2TB Black
Display(s) Shimian QH270 (1440p), Asus VE228 (1080p)
Case Cooler Master 430 Elite
Audio Device(s) Onboard > PA2V2 Amp > Senn 595's
Power Supply Corsair 750w
Software Windows 8.1 (Tweaked)
#23
Joined
Jul 19, 2007
Messages
7,043 (1.85/day)
Likes
863
Location
Sector ZZ₉ Plural Z Alpha
System Name УльтраФиолет
Processor Intel Kentsfield Q9650 @ 3.8GHz (4.2GHz highest achieved)
Motherboard ASUS P5E3 Deluxe/WiFi; X38 NSB, ICH9R SSB
Cooling Delta V3 block, XPSC res, 120x3 rad, ST 1/2" pump - 10 fans, SYSTRIN HDD cooler, Antec HDD cooler
Memory Dual channel 8GB OCZ Platinum DDR3 @ 1800MHz @ 7-7-7-20 1T
Video Card(s) Quadfire: (2) Sapphire HD5970
Storage (2) WD VelociRaptor 300GB SATA-300; WD 320GB SATA-300; WD 200GB UATA + WD 160GB UATA
Display(s) Samsung Syncmaster T240 24" (16:10)
Case Cooler Master Stacker 830
Audio Device(s) Creative X-Fi Titanium Fatal1ty Pro PCI-E x1
Power Supply Kingwin Mach1 1200W modular
Software Windows XP Home SP3; Vista Ultimate x64 SP2
Benchmark Scores 3m06: 20270 here: http://hwbot.org/user.do?userId=12313
#24
IMO - ASUS is the only true 1337 high-end motherboard manufacturer - hell, they even go the extra distance to include pointless bells and whistles just so they can charge $100 more than their competition . . . and people still buy them like hot cakes! Even if I wasn't ASUS loyal, that right there would say something to me, if people are willing to pay that much extra for a high-end board.

One day, I swear I'm going to prove my "an ASUS motherboard is truly bulletproof" theory, and post the vid online . . . I just don't currently own a gun, and am too lazy to get the permits and all . . .



Anyhow, I used an ECS years ago, and wasn't much impressed . . . it wasn't too shoddy, TBH, but it had problems that mimicked other failing components every now and then. Perhaps it was just bad circuitry/PCB architecture, not sure . . . but it was thrown in the trash and replaced with an Abit.
 

Bytor

New Member
Joined
Jun 27, 2007
Messages
1,051 (0.27/day)
Likes
105
System Name "The Dark Spider"
Processor AMD Phenom 9850 @ 3.0
Motherboard Asus M3A79-T
Cooling Water: CPU and GPU's, 2 pumps, 2 BIX Rads, D-Tek Fuzion v1, 2 Swiftech MCW60
Memory 4 gigs Crucial Balistix Tracers (1066 @ 1256)
Video Card(s) Sapphire 4870x2
Storage WD SATA 640 Gig HDD
Display(s) Acer 24" beast...
Case Modded Rocketfish
Audio Device(s) Onboard (only use head phones)
Power Supply 700 watt
Software a bunch
Benchmark Scores 3D Mark 06: 9859 on 2-X1950 pro's Xfire 3D Mark 06: 12794 on 1-3870 3D Mark 06: 16484 Xfire
#25
I have built maybe 8-9 systems using ECS boards and they ran great.. Mostly the K7S5A & K7S6A boards. I still have 3 rigs running in my house on these boards. Not saying I would look to them for my gaming rig, but I have never had a problem using there equipment.

Now PC chips boards on the other hand......