Enemigo Publiko by masbuskado

[masbuskado]

Enemigo Publiko

Hello everybody, this is my latest project and it was my entry for the OCN 2010 Case Mod Contest.

I start and finish this project without a plan, a friend make me a challenge, he told me that he would like to see some extreme case modification to any HAF case so I told him I have one unboxed HAF... he told me I don't wanna see the regular side panel mod and you can't use any hardware just show me what you can do this case... so I step forward and took the challenge...

So here we go again...

 

[masbuskado]

Day 1 Disassembling the Case

 

[masbuskado]

Day 1 Part 2

 

[masbuskado]

Day 1 Part 3

 

[masbuskado]

Day 2 Making the Case Feet

 

[masbuskado]

Day 3 Side Panels and Top panel (New Ventilation System)

 

[masbuskado]

Day 4

 

[masbuskado]

Day 5 Day 5 Changing the rear ventilation panel!

 

[masbuskado]

Day 6 New Cover for the PSU and custom rad (not included in this log)

 

[masbuskado]

Day 7 Random Ideas!!!

 

[masbuskado]

Day 8 Take 2 [Front bezel]

Injured wrist... but the show must continue!!!

Didn't like the first design for the front bezel so I change it a little bit!!!

 

[masbuskado]

DAY 9 More Random Stuff!!!

 

[masbuskado]

DAY 10 is bondo time!

I have 2 custom res design in my head so let see which one I will use!

 

[masbuskado]

DAY 11 Making Custom reservoir #1 (Multi-chamber)

 

[masbuskado]

DAY 12 Creating some depth for the new ventilation system (top)

 

[masbuskado]

DAY 13 Top Panel 3/4" height

 

[masbuskado]

DAY 14 Waiting for the top panel to dry and stick together!

DAY 15

Making a lid on the control panel!

 

[masbuskado]

DAY 16 More work on the top!!!

 

[masbuskado]

DAY 17 Some stuff from Home Depot!!!

New hinges for the side panels!

 

[masbuskado]

Memorial Day [DAY 18]

A closer look to the bat-wing type opening side panels

Start sanding the top panel!

Just an wild idea!

 

[masbuskado]

DAY 19 Fixing some air bubbles in the bondo!

 

[masbuskado]

DAY 20 Sanding...

 

[masbuskado]

DAY 21 More sanding and detailing the top panel!

 

[masbuskado]

DAY 22 - Part 1 Part 1 Making bottom-front I/O ports panel!

 

[masbuskado]

DAY 22 - Part 2 More Holes and sanding!!!