Error Code 43 on GTX 980ti Kingpin

d1sc0d4nc3r · Oct 1, 2019

Hello peeps,

Struggling with my water cooled Kingpin card for few weeks now.
I bought a low profile nvidia card to fire up the system as it doesnt boot up on its own.
Now it works with the budget card but my Kingpin gives error code 43 in device manager. System recognize the card but cant upgrade driver. Already rolled back to 353.38 and 436.30 nvidia drivers. Nothing changed. Also used DDU in safe mode. Flashed to standard bios with nvflash etc.
These are the infos from nvflash:
EEPROM ID (C8,4012) : GD GD25Q20 2.7-3.6V 2048Kx1S, page
Legacy BIOS ................ Pass
UEFI ..............................Pass
Firmware certificate ...... Pass
InfoROM ........................ Mismatch
Unallocated Space ........ Mismatch
Mismatch error : Command Compare Error
Is there any way to reflash infoROM somehow?
Any other ideas I can try with?
Thanks in advance

eidairaman1 · Oct 1, 2019

Did you buy the card new or used recently?

Take pics of white stickers on back of card/side of heatsink.

Get a gpu-z screenshot if possible too

the54thvoid · Oct 1, 2019

From your description, it sounds like you're missing something out? The Kingpin has a dual BIOS switch. If it's not working at all, it sounds like a bad flash on both BIOS's? But that would be highly unusual. Have you tried the other BIOS switch?

TheMadDutchDude · Oct 1, 2019

Error 43 means it isn’t functioning correctly. If it did this before a BIOS flash, the card may be dead or close to it.

If flashing the original BIOS doesn’t bring it back, I fear you have bigger problems on your hands.

d1sc0d4nc3r · Oct 2, 2019

eidairaman1 said:
Did you buy the card new or used recently?

Take pics of white stickers on back of card/side of heatsink.

Get a gpu-z screenshot if possible too

Hi,

I bought the card used on eBay. Took some time to get all the parts to complete the build so return policy on eBay already expired. I couldnt even reach the seller there. Only sticker I have is the one on the backplate. Gpuz screenshot only see my main card what is a low profile budget nvidia card atm. Just to run the system and troubleshoot Kingpin card.
Thanks for your input!

the54thvoid said:
From your description, it sounds like you're missing something out? The Kingpin has a dual BIOS switch. If it's not working at all, it sounds like a bad flash on both BIOS's? But that would be highly unusual. Have you tried the other BIOS switch?

Hi,

Kingpin cards have 3 different bios.
Tried the switch on normal, OC and LN2 mode as well.
No success.
Thanks for your input

TheMadDutchDude said:
Error 43 means it isn’t functioning correctly. If it did this before a BIOS flash, the card may be dead or close to it.

If flashing the original BIOS doesn’t bring it back, I fear you have bigger problems on your hands.

Hi,

I have flashed the bios indeed. With the standard one came from EVGA.
Im thinking about that Mismatch InfoROM message.
Is it possible to reflash that file somehow with nvflash?
I still have hope as card shows up on device manager and all the leds are lit.
Thanks for your input.

I have these few lines here as well.
Maybe it says more to an nvidia expert than to me

eidairaman1 · Oct 2, 2019

You got inforom mismatch because you put wrong bios on.

I need you to pull the card apart and verify what ram chips are on there

d1sc0d4nc3r · Oct 2, 2019

eidairaman1 said:
You got inforom mismatch because you put wrong bios on.

I need you to pull the card apart and verify what ram chips are on there

Ram chips are Samsung HC28 ones.
Which one is the correct bios? Im really confused.
I downloaded the stock vbios from evga website what is 203kbyte and that must be the standard vbios for KPE cards
Am I missing something?
There are 3 vbios on their official website. Standard, OC and LN2
I went with the first one.

eidairaman1 · Oct 2, 2019

d1sc0d4nc3r said:
Ram chips are Samsung HC28 ones.
Which one is the correct bios? Im really confused.
I downloaded the stock vbios from evga website what is 203kbyte and that must be the standard vbios for KPE cards
Am I missing something?
There are 3 vbios on their official website. Standard, OC and LN2
I went with the first one.

I will find out

d1sc0d4nc3r · Oct 2, 2019

eidairaman1 said:
I will find out

Thanks for your time

eidairaman1 · Oct 3, 2019

Here are 3 files, they are specifically for kingpin.

EVGA GTX 980 Ti VBIOS

6 GB GDDR5, 1203 MHz GPU, 1753 MHz Memory

www.techpowerup.com

EVGA GTX 980 Ti VBIOS

6 GB GDDR5, 1203 MHz GPU, 1774 MHz Memory

www.techpowerup.com

EVGA GTX 980 Ti VBIOS

6 GB GDDR5, 1203 MHz GPU, 1753 MHz Memory

www.techpowerup.com

Nvflash

NVIDIA NVFlash 5.821.0 Download

NVIDIA NVFlash is used to flash the graphics card BIOS on Ampere, Turing, Pascal and all older NVIDIA cards. NVFlash supports BIOS flashing on NVID

www.techpowerup.com

Nvflash mod

NVIDIA NVFlash with Certificate Checks Bypassed v5.287 Download

This modified version of NVFlash lets you flash a modified BIOS to your NVIDIA graphics card.

www.techpowerup.com

NVIDIA NVFlash with Board Id Mismatch Disabled v5.590.0 Download

This is a patched version of NVIDIA's NVFlash. On Turing cards, NVFlash no longer allows overriding of the "board ID mismatch" message through comm

www.techpowerup.com

d1sc0d4nc3r said:
Thanks for your time ✌

d1sc0d4nc3r · Oct 3, 2019

Thank you very much for your help sir!
So now I have 3 different Bios and 3 different Nvflash to play with

Does it matter which ones I try first or should I just keep trying until it get fixed?
Are these files all compatible with each other? So I can use all combinations I guess.
Thank you again for your time and help :clap:

I let you know how it goes.

eidairaman1 · Oct 3, 2019

Use the first one, then the 2nd then 3rd if one of the 3 fails.

cornholio666 · Oct 5, 2019

Since I have pretty much the same issue I'll hook up your thread.
https://ibb.co/9gQ9fjb
Same picture as above if I flash the vga bios and then compare to the file that I used for flashing.
The bios is from the net, but has the same version number as my original bios. The original bios is lost, because the card went black after trying to connect another PWM fan to the radiator, which wasn't plug and play (and I produced a short).
All coils have voltage and nothing looks burnt. The card is recognized as 980ti (error 43) but does not produce an image.
Exact card model:
https://ibb.co/gFVkRNB

eidairaman1 · Oct 5, 2019

cornholio666 said:
Since I have pretty much the same issue I'll hook up your thread.
https://ibb.co/9gQ9fjb
Same picture as above if I flash the vga bios and then compare to the file that I used for flashing.
The bios is from the net, but has the same version number as my original bios. The original bios is lost, because the card went black after trying to connect another PWM fan to the radiator, which wasn't plug and play (and I produced a short).
All coils have voltage and nothing looks burnt. The card is recognized as 980ti (error 43) but does not produce an image.
Exact card model:
https://ibb.co/gFVkRNB

You need this person to repair it then.

Eli Tech

My instagram https://www.instagram.com/tailoveleven/

www.youtube.com

cornholio666 said:
Since I have pretty much the same issue I'll hook up your thread.
https://ibb.co/9gQ9fjb
Same picture as above if I flash the vga bios and then compare to the file that I used for flashing.
The bios is from the net, but has the same version number as my original bios. The original bios is lost, because the card went black after trying to connect another PWM fan to the radiator, which wasn't plug and play (and I produced a short).
All coils have voltage and nothing looks burnt. The card is recognized as 980ti (error 43) but does not produce an image.
Exact card model:
https://ibb.co/gFVkRNB

And not all cards are the same, different click speeds, memory and voltages, device and subsystem IDs too.

I can help you but i need the white sticker info from back of your card too.

d1sc0d4nc3r said:
Thank you very much for your help sir!
So now I have 3 different Bios and 3 different Nvflash to play with
Does it matter which ones I try first or should I just keep trying until it get fixed?
Are these files all compatible with each other? So I can use all combinations I guess.
Thank you again for your time and help
I let you know how it goes.

Did you fix your card?

cornholio666 · Oct 5, 2019

is it the wrong sticker in my first post?
here again a better picture:
https://ibb.co/98vM74V
and the back of card without backplate:
https://ibb.co/GQ1ZyDy

hope not to need Eli

actually the card did not got black with the short, it was still running for a couple of minuits. It went black when I was trying different wire combinations with the new pwm fan, because it was running always at full speed.
But might also have been the short with some time delay due to capacity effects or so...

eidairaman1 · Oct 7, 2019

cornholio666 said:
is it the wrong sticker in my first post?
here again a better picture:
https://ibb.co/98vM74V
and the back of card without backplate:
https://ibb.co/GQ1ZyDy

hope not to need Eli
actually the card did not got black with the short, it was still running for a couple of minuits. It went black when I was trying different wire combinations with the new pwm fan, because it was running always at full speed.
But might also have been the short with some time delay due to capacity effects or so...

Give me time to research

What specific model is this card?

Nvmd I found it

InnoVISION Multimedia Limited

InnoVISION Multimedia Limited is a pioneering developer and manufacturer of a diverse range of cutting-edge multimedia PC hardware products established in 1998 Hong Kong. Our manufacturing operations have been set up since 1990 in Shenzhen, China. In this

www.inno3d.com

Your model number is C98TP-1SDN-N5HNX

cornholio666 · Oct 7, 2019

Almost: model number C98TP-1SDN-N5HNX

eidairaman1 · Oct 7, 2019

cornholio666 said:
Almost: model number C98TP-1SDN-N5HNX

Eh the link is right lol, anyways gonna do some locating

These are the only 2 files that may work. You might need to contact inno3D and give your model and serial number for needed bios files

Inno3D GTX 980 Ti VBIOS

6 GB GDDR5, 1203 MHz GPU, 1823 MHz Memory

www.techpowerup.com

Inno3D GTX 980 Ti VBIOS

6 GB GDDR5, 1203 MHz GPU, 1823 MHz Memory

www.techpowerup.com

This link have a few modded ones 1 says gor airbox x4 herculez and the other just says dark so beware.

max-clock.com - max clock Resources and Information.

max-clock.com is your first and best source for all of the information you’re looking for. From general topics to more of what you would expect to find here, max-clock.com has it all. We hope you find what you are searching for!

www.max-clock.com

cornholio666 · Oct 9, 2019

eidairaman1 said:
Eh the link is right lol, anyways gonna do some locating

These are the only 2 files that may work. You might need to contact inno3D and give your model and serial number for needed bios files

Inno3D GTX 980 Ti VBIOS

6 GB GDDR5, 1203 MHz GPU, 1823 MHz Memory

www.techpowerup.com

Inno3D GTX 980 Ti VBIOS

6 GB GDDR5, 1203 MHz GPU, 1823 MHz Memory

www.techpowerup.com

This link have a few modded ones 1 says gor airbox x4 herculez and the other just says dark so beware.

max-clock.com - max clock Resources and Information.

max-clock.com is your first and best source for all of the information you’re looking for. From general topics to more of what you would expect to find here, max-clock.com has it all. We hope you find what you are searching for!

www.max-clock.com

No change with both bios. Looks like I really need Eli

eidairaman1 · Oct 9, 2019

cornholio666 said:
No change with both bios. Looks like I really need Eli

Contact inno3d then go with eli

d1sc0d4nc3r · Oct 15, 2019

Im back again,
Tried every official vbios has been sent to me here.
Managed to update all 3 on the card but error code 43 still remains in device manager.
Nvflash says update was successful so I dont know what else I can try.
I will do a force vga driver reset in safe mode with DDU.
After that I ran out of ideas.
I was wondering if a TT riser cable could be the source of error?
Thanks

eidairaman1 · Oct 15, 2019

Contact EVGA for correct bios.

Once you have it installed, attempt to upload it to the tpu vga bios database by using the arrow button by the uefi check box in gpu-z. You may receive a prompt that the file is already in the database with a link, copy that link and post it here, if you dont get that prompt at some point you will receive a link to the file you uploaded, post it here too.

Otherwise you may need eli tech for that common code 43 for nvidia cards

d1sc0d4nc3r · Oct 15, 2019

Thanks very much I do as you say and I contact EVGA right now.
Is Eli tech on this forum or should I reach out for him somewhere else on the internet?

eidairaman1 · Oct 15, 2019

This guy.

Eli Tech

My instagram https://www.instagram.com/tailoveleven/

www.youtube.com

He may have a website with his info

d1sc0d4nc3r · Oct 15, 2019

eidairaman1 said:
This guy.

Eli Tech

My instagram https://www.instagram.com/tailoveleven/

www.youtube.com

He may have a website with his info

It looks like he advertised his equipment on youtube a week ago so maybe he is quitting from this whole vga repair business.
I found an email address so I send a question anyway.
Thanks again.

System Name	PCGOD
Processor	AMD FX 8350@ 5.0GHz
Motherboard	Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling	Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory	16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s)	AMD Radeon 290 Sapphire Vapor-X
Storage	Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s)	NEC Multisync LCD 1700V (Display Port Adapter)
Case	AeroCool Xpredator Evil Blue Edition
Audio Device(s)	Creative Labs Sound Blaster ZxR
Power Supply	Seasonic 1250 XM2 Series (XP3)
Mouse	Roccat Kone XTD
Keyboard	Roccat Ryos MK Pro
Software	Windows 7 Pro 64

Processor	Ryzen 7800X3D
Motherboard	MSI MAG Mortar B650 (wifi)
Cooling	be quiet! Dark Rock Pro 4
Memory	32GB Kingston Fury
Video Card(s)	Gainward RTX4070ti
Storage	Seagate FireCuda 530 M.2 1TB / Samsumg 960 Pro M.2 512Gb
Display(s)	LG 32" 165Hz 1440p GSYNC
Case	Asus Prime AP201
Audio Device(s)	On Board
Power Supply	be quiet! Pure POwer M12 850w Gold (ATX3.0)
Software	W10

System Name	PCGOD
Processor	AMD FX 8350@ 5.0GHz
Motherboard	Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling	Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory	16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s)	AMD Radeon 290 Sapphire Vapor-X
Storage	Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s)	NEC Multisync LCD 1700V (Display Port Adapter)
Case	AeroCool Xpredator Evil Blue Edition
Audio Device(s)	Creative Labs Sound Blaster ZxR
Power Supply	Seasonic 1250 XM2 Series (XP3)
Mouse	Roccat Kone XTD
Keyboard	Roccat Ryos MK Pro
Software	Windows 7 Pro 64

System Name	PCGOD
Processor	AMD FX 8350@ 5.0GHz
Motherboard	Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling	Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory	16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s)	AMD Radeon 290 Sapphire Vapor-X
Storage	Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s)	NEC Multisync LCD 1700V (Display Port Adapter)
Case	AeroCool Xpredator Evil Blue Edition
Audio Device(s)	Creative Labs Sound Blaster ZxR
Power Supply	Seasonic 1250 XM2 Series (XP3)
Mouse	Roccat Kone XTD
Keyboard	Roccat Ryos MK Pro
Software	Windows 7 Pro 64

System Name	PCGOD
Processor	AMD FX 8350@ 5.0GHz
Motherboard	Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling	Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory	16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s)	AMD Radeon 290 Sapphire Vapor-X
Storage	Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s)	NEC Multisync LCD 1700V (Display Port Adapter)
Case	AeroCool Xpredator Evil Blue Edition
Audio Device(s)	Creative Labs Sound Blaster ZxR
Power Supply	Seasonic 1250 XM2 Series (XP3)
Mouse	Roccat Kone XTD
Keyboard	Roccat Ryos MK Pro
Software	Windows 7 Pro 64

Error Code 43 on GTX 980ti Kingpin

New Member

The Exiled Airman

Intoxicated Moderator

New Member

Attachments

The Exiled Airman

New Member

The Exiled Airman

New Member

The Exiled Airman

New Member

The Exiled Airman

New Member

The Exiled Airman

New Member

The Exiled Airman

New Member

The Exiled Airman

New Member

The Exiled Airman

New Member

Attachments

The Exiled Airman

New Member

The Exiled Airman

New Member