-
Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
EVGA 2080 ti ftw3 temps
- Thread starter kvn864
- Start date
- Joined
- Mar 18, 2015
- Messages
- 2,960 (0.89/day)
- Location
- Long Island
It's normal ..... tho EVGA tends to run hotter than most. The overall cooling system approach has been lacking for quite a while.
-The 570 series had significant reports or blown VRMs
-On the 970 SCs , 1/3 of the heat sink "missed" the GPU
-On the 1060 / 1070 / 1080 they cheaped out not providing thermal pads and carts were providing Pyrotechnics. End result, you could either order replacement cards in warranty exchange or you could have the send you a set of pads and install them yourself.
Here's some thermal imaging measurements for you to compare with
www.guru3d.com
www.guru3d.com
Remember also that vendors oft have different ideas when setting up their cards fan curves ... if you want to lower noise, you will increase temps .... if you want to reduce temps, then you will get more noise. You can control that by adjusting your fan curve.
-The 570 series had significant reports or blown VRMs
-On the 970 SCs , 1/3 of the heat sink "missed" the GPU
-On the 1060 / 1070 / 1080 they cheaped out not providing thermal pads and carts were providing Pyrotechnics. End result, you could either order replacement cards in warranty exchange or you could have the send you a set of pads and install them yourself.
Here's some thermal imaging measurements for you to compare with
MSI GeForce RTX 2080 Ti Gaming X TRIO review
Oh yes, you figured we only had founders reviews to show, au contraire my fellow guru, in this review we'll peek at that beast of a card from MSI, we review the MSI GeForce RTX 2080 Ti Gaming X TR... Graphics Card Thermal Imaging Measurements (FLIR)
Asus GeForce RTX 2080 Ti RoG Strix review
We had a couple of hours hands-on time with the GeForce RTX 2080 Ti RoG Strix, this article is 80% of the final review, just to give you some photos and benchmarks close to RTX launch day.... Graphics Card Thermal Imaging Measurements (FLIR)
Remember also that vendors oft have different ideas when setting up their cards fan curves ... if you want to lower noise, you will increase temps .... if you want to reduce temps, then you will get more noise. You can control that by adjusting your fan curve.
- Joined
- Jul 14, 2006
- Messages
- 2,418 (0.37/day)
- Location
- People's Republic of America
| System Name | It's just a computer |
|---|---|
| Processor | i9-14900K Direct Die |
| Motherboard | MSI Z790 ACE MAX |
| Cooling | Dual D5T Vario, XSPC BayRes, Nemesis GTR560, NF-A14-iPPC3000PWM, NF-A14-iPPC2000, HK IV Pro Nickel |
| Memory | G.SKILL F5-7200J3646F24GX2-TZ5RK |
| Video Card(s) | eVGA RTX2080 FTW3 Ultra |
| Storage | Samsung 990 PRO 1TB M.2 |
| Display(s) | LG 32GK650F |
| Case | Thermaltake Xaser VI |
| Audio Device(s) | Auzentech X-Meridian 7.1 2G/Z-5500 |
| Power Supply | Seasonic Prime PX-1300 |
| Mouse | Logitech |
| Keyboard | Logitech |
| Software | Win11PRO |
My 2080FTW3 (not Ti) after 5 minutes of Furmark at 2K.
Has to be an issue with contact on the ICs.
Has to be an issue with contact on the ICs.