AKlass
New Member
- Joined
- Oct 10, 2007
- Messages
- 297 (0.05/day)
- Location
- MD
| Processor | Intel Pentium Dual Core E2180~MO 3.16ghz 316x10 |
|---|---|
| Motherboard | Gigabyte 945GCM-S2C |
| Cooling | HDT S963 2x120mm Rosewill intake fans 2x80mm Rosewill exhaust fans |
| Memory | 2 x 2GB Wintec Ampo DDR2 632 5-4-4-14 2.0v |
| Video Card(s) | ATI 5770 950/1400 |
| Storage | 750GB WD Caviar Black SATA |
| Display(s) | Sceptre x42 naga |
| Case | Apevia Qboii |
| Audio Device(s) | C-Media 8768 |
| Power Supply | OCZ ModXstream 500w |
| Software | Win7 Ultimate (X64) |
Hey TPU, I'm stick in a dilemma I wired up some cold cathodes into a friend's car as footwell lighting, the problem was that the passenger cathode needed to have its wire extended, to do this I used 16gauge wire and wire crimps between the transformer and the cathode, the problem is that on the cathode only 1/4th of the passenger side cathode will light up while the driver's side which has no extension is bright and fully lit up. When you wire the passenger side directly to the transformer it functions fine. Also on the passenger side I swapped the cathodes and it still does the same thing. I'm stumped..