F.E.A.R. Not Opening/Opening with Error

[overclock[r]]

i have a problem with fear
everytime i open, it either doesnt open at all, or it opens, i wait, then a error pops up, something about this
"the memory cannot be "read"
thats what it said
i cant remember the memory entries... but could it possibly be my memory?

 

[infrared]

I moved your post to a thread of it's own. You should be able to get better help now

From what you've said, it looks like your ram is overclocked too far, or is running with too little voltage. What's your system specs?

 

[overclock[r]]

I moved your post to a thread of it's own. You should be able to get better help now

From what you've said, it looks like your ram is overclocked too far, or is running with too little voltage. What's your system specs?

my specs:
p4 3ghz at 3.89 (i like to refer it as 4 ghz to make myself think its faster lol)
ecs c-19 sli a (crappiest mobo on earth, other than asrock)
ocz ddr2 533 at umm... dunno what ever is 4:5 to 1030 fsb qdr could it be that i clocked memory too high?
im running with over 2.2 volts, waay higher than its supposed to... its only rated to runm at 1.6 (i think)
x800gto 6.11k in 05 570/600 (most likely... i dunno)
as u can see, im too lazy to check lmao

 

[Azn Tr14dZ]

Can you try it lower, w/ a lower divider see if it works?

 

[overclock[r]]

Can you try it lower, w/ a lower divider see if it works?

well, ive tried it at ddr666 with 2.1 volts and still nothing...
and to tell u... i can run other games (bf2, flight sim, nfs) really well, most of the time over 40fps with medium high settings
i dunno whats wrong
i am moving to conroe anyways so i will just wait it out... not being able to play fear is bad, but not getting conroe is worse, so i will get conroe and exchange 1 year or fear time for it
first step for me is getting watercooling

 

[infrared]

Problem is fear is extremely sensetive to overclocking. For example, in nearly all my games i could run my P4 @ 4.8ghz (prime stable), but with FEAR i had to drop that down to 4.3ghz, or the game simply wouldn't run for more than 5 minutes.

Try dropping everything back to stock, and start raising the fsb until the problem re-occurs.

 

[overclock[r]]

Problem is fear is extremely sensetive to overclocking. For example, in nearly all my games i could run my P4 @ 4.8ghz (prime stable), but with FEAR i had to drop that down to 4.3ghz, or the game simply wouldn't run for more than 5 minutes.

Try dropping everything back to stock, and start raising the fsb until the problem re-occurs.

i tried at 1000qdr fsb... still nope

 

[Agility]

make a backup profile of everything and then default all to stock speeds. Then try it. If the problem still occurs man god know's whats wrong