• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

First experience with mining hardware

meteora797

New Member
Joined
Mar 28, 2022
Messages
2 (0.00/day)
I have a customer who bought his new mining pc on internet. After a couple weeks of work 2 out of 4 video cards stopped working, when he come to me with his PC i smelled a burning smell and checking the cables I noticed that some connectors were melted. I've tested the PSU and was faulty. VGA now seem to work propely with my PSU, but its not enoght strong to power all them up, so i tested them individually. I've notice that some riser+vga combination can bring to a BSOD, but swapping riser solve the issue. I am not experienced enough on this subject, so i need some advice. What PSU i must buy to replace the faulty one? Is a good idea to replace all the rizer to prevent BSOD?
CPU: Core i5 9600k
MB: TB360-BTC PRO
4 x GPU: RTX 3060
Old PSU: Corsair HX1200
 
Joined
Dec 18, 2005
Messages
8,253 (1.23/day)
System Name money pit..
Processor Intel 9900K 4.8 at 1.152 core voltage minus 0.120 offset
Motherboard Asus rog Strix Z370-F Gaming
Cooling Dark Rock TF air cooler.. Stock vga air coolers with case side fans to help cooling..
Memory 32 gb corsair vengeance 3200
Video Card(s) Palit Gaming Pro OC 2080TI
Storage 150 nvme boot drive partition.. 1T Sandisk sata.. 1T Transend sata.. 1T 970 evo nvme m 2..
Display(s) 27" Asus PG279Q ROG Swift 165Hrz Nvidia G-Sync, IPS.. 2560x1440..
Case Gigabyte mid-tower.. cheap and nothing special..
Audio Device(s) onboard sounds with stereo amp..
Power Supply EVGA 850 watt..
Mouse Logitech G700s
Keyboard Logitech K270
Software Win 10 pro..
Benchmark Scores Firestike 29500.. timepsy 14000..
the 1200 watt psu should be plenty enough for 4 x 3060 cards.. they do need to be set properly.. you should not be running them at stock settings..

trog
 

meteora797

New Member
Joined
Mar 28, 2022
Messages
2 (0.00/day)
Thanks for the reply!
Setting up the gpu correctly will be up to the owner. He just asked me to test the pc and get it back up and running.
Do you have any advice for the type of power supply? On another forum a user recommended me a 1200w HP server power supply with breakout board. Do you think it could be a good choice? Do you have any risers to recommend?
 
Joined
Dec 18, 2005
Messages
8,253 (1.23/day)
System Name money pit..
Processor Intel 9900K 4.8 at 1.152 core voltage minus 0.120 offset
Motherboard Asus rog Strix Z370-F Gaming
Cooling Dark Rock TF air cooler.. Stock vga air coolers with case side fans to help cooling..
Memory 32 gb corsair vengeance 3200
Video Card(s) Palit Gaming Pro OC 2080TI
Storage 150 nvme boot drive partition.. 1T Sandisk sata.. 1T Transend sata.. 1T 970 evo nvme m 2..
Display(s) 27" Asus PG279Q ROG Swift 165Hrz Nvidia G-Sync, IPS.. 2560x1440..
Case Gigabyte mid-tower.. cheap and nothing special..
Audio Device(s) onboard sounds with stereo amp..
Power Supply EVGA 850 watt..
Mouse Logitech G700s
Keyboard Logitech K270
Software Win 10 pro..
Benchmark Scores Firestike 29500.. timepsy 14000..
the cards will draw a lot more power at stock than when tweaked for mining..

trog
 

phill

Moderator
Staff member
Joined
Jun 8, 2011
Messages
15,973 (3.40/day)
Location
Somerset, UK
System Name Not so complete or overkill - There are others!! Just no room to put! :D
Processor Ryzen Threadripper 3970X
Motherboard Asus Zenith 2 Extreme Alpha
Cooling Lots!! Dual GTX 560 rads with D5 pumps for each rad. One rad for each component
Memory Viper Steel 4 x 16GB DDR4 3600MHz not sure on the timings... Probably still at 2667!! :(
Video Card(s) Asus Strix 3090 with front and rear active full cover water blocks
Storage I'm bound to forget something here - 250GB OS, 2 x 1TB NVME, 2 x 1TB SSD, 4TB SSD, 2 x 8TB HD etc...
Display(s) 3 x Dell 27" S2721DGFA @ 7680 x 1440P @ 144Hz or 165Hz - working on it!!
Case The big Thermaltake that looks like a Case Mods
Audio Device(s) Onboard
Power Supply EVGA 1600W T2
Mouse Corsair thingy
Keyboard Razer something or other....
VR HMD No headset yet
Software Windows 11 OS... Not a fan!!
Benchmark Scores I've actually never benched it!! Too busy with WCG and FAH and not gaming! :( :( Not OC'd it!! :(
Make sure the riser cables are not SATA or MOLEX powered. I believe you will need the proper PCIe power cable models to connect them, which is why I believe people use the breakout boards and such for their setups.

I've only really used the SATA models myself but that was with RX 480 cards, anything more powerful would have needed the proper and better PCIe powered riser cards. Whilst they might be a little more expensive than the SATA/MOLEX models, they ultimately shouldn't fill your room with the smell and smoke that everyone hates to smell and see....
 
Top