Fitseries3
Eleet Hardware Junkie
well here's the story...
a piece of acrylic thats $83 started out like this...
then you cut it...
get these....
put them in the HAAS CNC mill...
work for 2 hours...
and end up with these....
and this is what you get....
1top and 4 screws
Prices as follows:
Acrylic single port - $40
Acrylic dual port - $45
Delrin single port - $45
Delrin dual port - $50
+$5 for polishing IF you want it. they are pretty slick already but if you need that extra shine i can hook you up
NOTE: you can use the red dtek nozel kit with these. you'll need the v2 uni mount, quickmount or promount.
prices include shipping. large order discounts available.
(a big goes thanks to Phil Wason over at Super Rat Machine Works)
a piece of acrylic thats $83 started out like this...
then you cut it...
get these....
put them in the HAAS CNC mill...
work for 2 hours...
and end up with these....
and this is what you get....
1top and 4 screws
Prices as follows:
Acrylic single port - $40
Acrylic dual port - $45
Delrin single port - $45
Delrin dual port - $50
+$5 for polishing IF you want it. they are pretty slick already but if you need that extra shine i can hook you up
NOTE: you can use the red dtek nozel kit with these. you'll need the v2 uni mount, quickmount or promount.
prices include shipping. large order discounts available.
(a big goes thanks to Phil Wason over at Super Rat Machine Works)
Last edited: