• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Geforce 7800 GTX Won’t Fit MSI K8N SLI!

malware

New Member
Joined
Nov 7, 2004
Messages
5,422 (0.76/day)
Location
Bulgaria
Processor Intel Core 2 Quad Q6600 G0 VID: 1.2125
Motherboard GIGABYTE GA-P35-DS3P rev.2.0
Cooling Thermalright Ultra-120 eXtreme + Noctua NF-S12 Fan
Memory 4x1 GB PQI DDR2 PC2-6400
Video Card(s) Colorful iGame Radeon HD 4890 1 GB GDDR5
Storage 2x 500 GB Seagate Barracuda 7200.11 32 MB RAID0
Display(s) BenQ G2400W 24-inch WideScreen LCD
Case Cooler Master COSMOS RC-1000 (sold), Cooler Master HAF-932 (delivered)
Audio Device(s) Creative X-Fi XtremeMusic + Logitech Z-5500 Digital THX
Power Supply Chieftec CFT-1000G-DF 1kW
Software Laptop: Lenovo 3000 N200 C2DT2310/3GB/120GB/GF7300/15.4"/Razer
MSI MESSED up one of its premium motherboards as you won't be able to fit a Geforce 7800 GTX in it. It's an SLI system and people at some forums discovered that one of the capacitors will interfere with one of the cards. It's clear that all users of MSI K8N SLI board won't be able to fit G70, G70, Geforce 7800 GTX card in this board!!! One of the capacitors is simply on the way and if you break the capacitor you will break the board.
You can check for more details here, so be careful when choosing a mainboard for your new 7800GTX SLI setup.

View at TechPowerUp Main Site
 

wazzledoozle

New Member
Joined
Aug 30, 2004
Messages
5,358 (0.75/day)
Location
Seattle
Processor X2 3800+ @ 2.3 GHz
Motherboard DFI Lanparty SLI-DR
Cooling Zalman CNPS 9500 LED
Memory 2x1 Gb OCZ Plat. @ 3-3-2-8-1t 460 MHz
Video Card(s) HIS IceQ 4670 512Mb
Storage 640Gb & 160Gb western digital sata drives
Display(s) Hanns G 19" widescreen LCD w/ DVI 5ms
Case Thermaltake Soprano
Audio Device(s) Audigy 2 softmod@Audigy 4, Logitech X-530 5:1
Power Supply Coolermaster eXtreme Power Plus 500w
Software XP Pro

Remove the plastic and directly connect wires?
 
Joined
Mar 27, 2005
Messages
1,009 (0.14/day)
Location
South Africa
Processor Intel i7-8700k @ stock
Motherboard MSI Z370 Gaming Pro Carbon
Cooling Corsair H115i Pro iirc
Memory 16GB Corsair DDR4-3466
Video Card(s) Gigabyte GTX 1070 FE
Storage Samsung 960 Evo 500G NVMe
Display(s) 34" ASUS ROG PG348Q + 28" ASUS TUF Gaming VG289
Case NZXT
Power Supply Corsair 850W
Mouse Logitech G502
Keyboard CoolerMaster Storm XT Stealth
VR HMD Oculus Quest 2
Yeah, I'm sure you could do that... Solder the wires onto the board? Or bend the connector slightly to the left (in the pic) to fit the fan cable (or whatever)? The pins are unlikely to break, but the connector won't fit completely then. You'd have to make sure the metal contacts make contact with the pins... ;)
 

wazzledoozle

New Member
Joined
Aug 30, 2004
Messages
5,358 (0.75/day)
Location
Seattle
Processor X2 3800+ @ 2.3 GHz
Motherboard DFI Lanparty SLI-DR
Cooling Zalman CNPS 9500 LED
Memory 2x1 Gb OCZ Plat. @ 3-3-2-8-1t 460 MHz
Video Card(s) HIS IceQ 4670 512Mb
Storage 640Gb & 160Gb western digital sata drives
Display(s) Hanns G 19" widescreen LCD w/ DVI 5ms
Case Thermaltake Soprano
Audio Device(s) Audigy 2 softmod@Audigy 4, Logitech X-530 5:1
Power Supply Coolermaster eXtreme Power Plus 500w
Software XP Pro
Electrical tape and hot glue also work wonders. Plus they wont void your warranty. :D
 

grazzhoppa

New Member
Joined
Apr 16, 2005
Messages
219 (0.03/day)
Processor Core 2 Duo E6750 @ 3.3GHz
Motherboard Abit IP35 Pro
Cooling Scythe Ninja, two 600RPM 12CM fans
Memory 4GB DDR2 @ 832MHz, 4-4-4-12 2T
Video Card(s) NVIDIA 8800GT @ 715/980 passively cooled
Storage 1TB WD10EARS, 500GB WD5000AAKS, 250GB HM250JI
Display(s) Samsung 204b LCD
Case Ultra Wizard
Audio Device(s) Onboard Realtek ALC888
Power Supply Seasonic S12-II 380 watt
Software Windows 7 Pro. (x64)
it looks like you could bend the capacitors and create just enough space for the power plug. Simply force that plastic fan connector inbetween the capacitors.

I had to do something similiar to get a zalman 7000 cpu cooler on a nf7-s v2. I didn't bend the capacitor that much though.

 
Joined
Aug 30, 2004
Messages
152 (0.02/day)
Location
Worcester, England
stupid place to have a fan connector anyway. I'm sure MSI are thinking the same.
 

wazzledoozle

New Member
Joined
Aug 30, 2004
Messages
5,358 (0.75/day)
Location
Seattle
Processor X2 3800+ @ 2.3 GHz
Motherboard DFI Lanparty SLI-DR
Cooling Zalman CNPS 9500 LED
Memory 2x1 Gb OCZ Plat. @ 3-3-2-8-1t 460 MHz
Video Card(s) HIS IceQ 4670 512Mb
Storage 640Gb & 160Gb western digital sata drives
Display(s) Hanns G 19" widescreen LCD w/ DVI 5ms
Case Thermaltake Soprano
Audio Device(s) Audigy 2 softmod@Audigy 4, Logitech X-530 5:1
Power Supply Coolermaster eXtreme Power Plus 500w
Software XP Pro
Eh not so much the connectors fault, MSI put a resistor that is higher than the PCI-E slot right next to the slot. Bad idea.
 

//mAr

New Member
Joined
Jun 4, 2004
Messages
188 (0.03/day)
Location
near Stuttgart, Germany
Processor AMD Athlon64 X2 3800+
Motherboard DFI Lanparty nF4 SLI-DR Expert
Cooling watercooling
Memory 2x1024mb Mushkin Redlines XP4000
Video Card(s) PoV 7900GT
Storage 2x74GB Raptor; 2x160GB 7k250 Hitachi
Display(s) Viewsonic VX912
Case LianLi PC70
Audio Device(s) Creative X-FI XtremeMusic
Power Supply OCZ520W
Software Windows XP Pro SP2
msi crap :>
 
Joined
May 20, 2004
Messages
10,487 (1.44/day)
wazzledoozle said:
Eh not so much the connectors fault, MSI put a resistor that is higher than the PCI-E slot right next to the slot. Bad idea.

A capacitor isn't a resistor :)

Though I doubt the elco can be bend enough, I'd remove the fans connector and connect it otherwise.
Also isn't it an SLI board? doesn't that mean there is another slot to put the card in? As long as you don't want to run SLI that should be fine.
 

wazzledoozle

New Member
Joined
Aug 30, 2004
Messages
5,358 (0.75/day)
Location
Seattle
Processor X2 3800+ @ 2.3 GHz
Motherboard DFI Lanparty SLI-DR
Cooling Zalman CNPS 9500 LED
Memory 2x1 Gb OCZ Plat. @ 3-3-2-8-1t 460 MHz
Video Card(s) HIS IceQ 4670 512Mb
Storage 640Gb & 160Gb western digital sata drives
Display(s) Hanns G 19" widescreen LCD w/ DVI 5ms
Case Thermaltake Soprano
Audio Device(s) Audigy 2 softmod@Audigy 4, Logitech X-530 5:1
Power Supply Coolermaster eXtreme Power Plus 500w
Software XP Pro
Eh same difference LOL. Its late in morning for me.

Maybe both slots have the same set of capacitors?
 

INSTG8R

Vanguard Beta Tester
Joined
Nov 26, 2004
Messages
7,966 (1.12/day)
Location
Canuck in Norway
System Name Hellbox 5.1(same case new guts)
Processor Ryzen 7 5800X3D
Motherboard MSI X570S MAG Torpedo Max
Cooling TT Kandalf L.C.S.(Water/Air)EK Velocity CPU Block/Noctua EK Quantum DDC Pump/Res
Memory 2x16GB Gskill Trident Neo Z 3600 CL16
Video Card(s) Powercolor Hellhound 7900XTX
Storage 970 Evo Plus 500GB 2xSamsung 850 Evo 500GB RAID 0 1TB WD Blue Corsair MP600 Core 2TB
Display(s) Alienware QD-OLED 34” 3440x1440 144hz 10Bit VESA HDR 400
Case TT Kandalf L.C.S.
Audio Device(s) Soundblaster ZX/Logitech Z906 5.1
Power Supply Seasonic TX~’850 Platinum
Mouse G502 Hero
Keyboard G19s
VR HMD Oculus Quest 2
Software Win 10 Pro x64
I mean from what I see the card is fully in the slot it is merely touching the Cap so I dont see it causing any serious issues anway unless your continuously moving the card or moving the rig
 
A

accordtr

Guest
nope it fits fine!!!!!!

hey all running the msi k8n neo4 sli and TWO leadtek 7800gtx's and guess what? the second card DOESNOT touch the cap!!!! It fits fine no contact at all, just make sure you put the card in striaght, not at and angle!!!!
 
Joined
Jul 1, 2005
Messages
5,197 (0.76/day)
Location
Kansas City, KS
System Name Dell XPS 15 9560
Processor I7-7700HQ
Memory 32GB DDR4
Video Card(s) GTX 1050/1080 Ti
Storage 1TB SSD
Display(s) 2x Dell P2715Q/4k Internal
Case Razer Core
Audio Device(s) Creative E5/Objective 2 Amp/Senn HD650
Mouse Logitech Proteus Core
Keyboard Logitech G910
accordtr said:
hey all running the msi k8n neo4 sli and TWO leadtek 7800gtx's and guess what? the second card DOESNOT touch the cap!!!! It fits fine no contact at all, just make sure you put the card in striaght, not at and angle!!!!

Picture? :confused:

an angle cannot effect that.. its going straight on...
 
Top