GeIL Ultra Plat. not o/c'ing well with DFI Ultra-D...

Azn Tr14dZ · Jul 27, 2006

My GeIL used to go at around 250Mhz on 3-4-4-9 1T. Now, on the DFI LanParty Ultra-D, it can't get past 210Mhz on 2-3-3-6, 2.5-3-3-6, or even 3-4-4-9. There are so many settings for the memory on DFIs, and I set them to the appropriate values, but it might not be right. Does anyone know good timings, or a good BIOS for my DFI board?

vexen · Jul 28, 2006

hi, since you switched motherboard (as i see), are you sure you are using the right settings to overclock (HTT, PCI clock, PCI-E clock...)

and what is your problem, are you crashing? not able to boot?

Processor	AMD Athlon 64 3200+
Motherboard	DFI LanParty nf4 Ultra-D
Cooling	Thermaltake Big Typhoon
Memory	2x512MB GeIL
Video Card(s)	ATI Radeon X800XL
Storage	2x80GB Western Digital
Display(s)	HP vs17
Case	SuperTalent
Audio Device(s)	Soundblaster
Power Supply	Ultra X-Finity 500 Watt

Processor	i7-4770k @ 4.4
Motherboard	Gigabyte GA-Z87X-UD5H
Cooling	Corsair H80i
Memory	16GB Mushkin Blackline Ridgeback DDR3-2400 11-13-13-31
Video Card(s)	EVGA GTX 780 Ti SC ACX
Storage	OCZ Vertex 4 256GB, 4x1TB WD Black RAID5
Display(s)	Samsung S27A850 2560x1440
Case	Antec Eleven Hundred
Audio Device(s)	Sound Blaster ZxR / Sennheiser HD650 on WooAudio WA7 RCA + Blue Yeti
Power Supply	Corsair HX750
Benchmark Scores	11186 Firestrike

GeIL Ultra Plat. not o/c'ing well with DFI Ultra-D...

Azn Tr14dZ

New Member

vexen