Get Your Modded P5Q Pro BIOS Here!

[Ketxxx]

Simple temperature miscalculation. The higher temp in older BIOS versions is wrong. To get temps as high as what is reported in older BIOS versions I would basically have to be using no HSF at all on my E4400, stock speeds and voltage my E4400 was reported at 40-50c idle (forget exact temp) and no C2D in existence can run that warm stock speeds and voltages, idle no less. The architecture is too efficient for that.

 

[Ketxxx]

You sure its not the other way round? My temp dropped 10*C going from 0703 to 0803. But I know the lower temp on the new bios is the correct one.

Its all relevant with Asus BIOSes, I doubt theres anything wrong with 1103. Very much to do with some of your hardware not being "suited" to that BIOS.

 

[alexp999]

Its all relevant with Asus BIOSes, I doubt theres anything wrong with 1103. Very much to do with some of your hardware not being "suited" to that BIOS.

So you reckon there is just a bug in the 1103 that doesnt like something in my system then?

 

[alexp999]

My Q6600 also have the same temp. droop
but how come you are sure the new temp. is the true one and why?

Becuase I went from one my old motherboard to the P5Q with the same processor and cooler, all setup the same, and my temps were higher. After the newer bios the temps came back down to were they were on the old motherboard.

Stick with the new bios's, they are correct the old bios's are wrong.

 

[Ketxxx]

Yup, I experienced similar to a more severe degree when I had the Crosshair with a couple BIOS versions.

 

[alexp999]

Yup, I experienced similar to a more severe degree when I had the Crosshair with a couple BIOS versions.

Cool. spose its like the 1003 that didnt work with raid. Will just have to see what the next bios brings and put up with an asus bios for now .
Thank god for Die-Hard Bios though, it had to kick in after the BSOD on the official 1103 bios.

 

[Ketxxx]

Yup thats basically it. Sucks for you atm but sometimes thats just the way it is with Asus. On the plus side you shouldn't be waiting more than a month or so for a new BIOS.

 

[hema]

hi Ketxxx
you write in this thread here
you could extract the memory table and CPU table and inject it into
I ask for the part in bios which respon. of reading the cpu temp and hardware monit.
which module
thanks alot

 

[Ketxxx]

I haven't looked. If I do it will be a while, something like that is not a bug. Asus simply revised their CPU temp algorithm to something similar of what other board manufacturers are using.

 

[hema]

ok can i replace the cpu microcode patches from old one like0703 in my board p5q in the new one1004
it can solve this reading of cpu temp. error
and after replacement the flash file need any checksum error or just replace and save the new one
thanks again

 

[hema]

ok can i replace the cpu microcode patches from old one like0703 in my board p5q in the new one1004
it can solve this reading of cpu temp. error
and after replacement the flash file need any checksum error or just replace and save the new one
thanks again

I do it with no help in my prob.
the same error reading of Q6600 surfece temp. reading

cpuin=29
core temp=42

 

[Deleted member 24505]

Heres the p5q-e 1201 bios guys.I dont know if its beta or not though,its from XS forum.

 

[alexp999]

I do it with no help in my prob.
the same error reading of Q6600 surfece temp. reading

cpuin=29
core temp=42

Its quite normal for the core temps and the CPu die temp to be 10*C out.

 

[hema]

is that happen with your Q6600 on EVGA 750i FTW also or not
please give me a picture if it is possib.
thanks for help

 

[hema]

Heres the p5q-e 1201 bios guys.I dont know if its beta or not though,its from XS forum.

ok man i just replace the cpu micro code from P5Q-DLX in that one
the same memory and logo
you can try it
try it

 

[drf]

ok man i just replace the cpu micro code from P5Q-DLX in that one
the same memory and logo
you can try it
try it

u mean u solved it?
i have same issue with 6600 on p5q pro 1104 bios
here my screenshot:

 

[Zehnsucht]

Why is it important? Isn't the core #x temperatures which are the ones you should look at, and that programs like realtemp registers?

 

[drf]

Why is it important? Isn't the core #x temperatures which are the ones you should look at, and that programs like realtemp registers?

why important yes sometimes i think let me explain:

1. any fan controller apps like: asus qfan app is cpu temp dependent, not reading core temp.
core temps are at 50-60 cpu temp shows 25 30 fan speed still low is it acceptable? u may offer manually adjusting fan apps activating degree (false values) but why not automatic like every user?
2.try to overclock cpu, but your fans not responding they are still in silent mode core temps rising to 65 70 C but reading cpu temp it says 40
3.for me the most important issue to worry about temps: i paid money like others and want a solid rock stable system so everything perfect either sensor informations .
u may call us obsessive but if u want your system perfect u want all little parts

 

[Zehnsucht]

Ah ok, I understand now, thanks for clarifying.

My entire system is watercooled, so all my fans are on one setting; lowest possible on my fan controller. Delta between idle and load is approx 15 degrees so I've never bothered with any kind of temperature control.

 

[Ketxxx]

I've said it before so I WONT say it again after this. Higher temps in older BIOS versions are because of the algorithm Asus chose, in later BIOS versions the algorithm has been changed to something similar of other manufacturers detection methods. IT IS NOT A BUG.

Replacing the P6 table will do nothing for changing how temps are detected. All changing the P6 table did was undo some support for other CPUs I added. Please do not post those BIOSes in this thread or I'll probably have people hassling me why X CPU doesn't work because they didn't realise I didn't do that BIOS.

 

[hema]

ok:shadedshu I will not post those BIOSes in this thread again as you wish:shadedshu
but i only replace in my one the cpu code with that one from dlx
with the same logo

 

[Ketxxx]

Before my bday duties kick into full swing I shall be releasing a P5Q Pro, Premium and Deluxe BIOS based on final release code, DL links should be available by the end of the day.

 

[hema]

what about p5q final one 1004

 

[Ketxxx]

If I have time to do that, yes, otherwise I'll get it done sometime after the weekend.

 

[alexp999]

If I have time to do that, yes, otherwise I'll get it done sometime after the weekend.

Asus have just put up 1201 for the P5Q deluxe. Will/are you working on that one?