Get Your Modded P5Q Pro BIOS Here!

[Ketxxx]

No prob

 

[Twisted Diego]

WuuuHuuu.... A bios for my SE board Thank you!

Thanks... I really hope this is gonna allow me to get past 3.8 stable

What changes have you done to this SE bios ?

 

[Ketxxx]

New P6 and memory table.

 

[Twisted Diego]

New P6 and memory table.

What is "p6" ?

 

[Ketxxx]

CPU microcode table.

 

[Twisted Diego]

CPU microcode table.

Okay.

So far i haven't been able to get it higher, but still working on it.

But i did get a change. I could lower my NB skew by 1 and my cpu by 2

 

[Ketxxx]

Cool. Btw, your 4850 isn't overclocked enough

 

[Twisted Diego]

Cool. Btw, your 4850 isn't overclocked enough

I´m having a few problems atm. My display driver is stopping under furmark(extreme,aax8&post proces)...

I think it´s because i haven´t reinstalled my OS since i changed from gigabyte w/ amd x5000

maybe my OC will better if i reinstall!

 

[kmarkmail]

Hi!

I've tried the newest 2102mod, but made my progs freezed and under browsing got OC problems and freezes too, not like 2002 or 2002mod.
Just wrote, good to know about it, maybe could be help for future progressions.

THX, by the way!

 

[lb7047]

newest bios modd

hey guys i am new to the forum, there is a lot of knowledge here. where can i download the newest bios modd for my Asus PQ pro turbo.


Thanks

 

[Frogger]

^^ page 1 this thread

 

[lb7047]

Thanks a lot

 

[lb7047]

it says its not compatible , I was trying to flash it in the bios using EZ flash, any suggestions
thanks

 

[jonkb]

Sorry for asking dumb question, but what's the diffrence between a normal BIOS and a modded BIOS? What have been changed with the modded BIOS?

 

[Assassin48]

Sorry for asking dumb question, but what's the diffrence between a normal BIOS and a modded BIOS? What have been changed with the modded BIOS?

taken from first post

These mBIOSes are not magical pixies injected into your P5Q series board, despite the massive praise people give them. The aim of these BIOSes is threefold;

1. Enhance memory compatibility
2. Enhance CPU support
3. Just because I can, put a half-decent boot logo in :
Reported additional fixes

These are things that were not intending to be fixed, but in due course of changing things got fixed.

1. Pull-ins. Apparently these pull-ins never worked, my changind of the EBB fixed them, apparently.
2. Better voltage regulation. Many report being able to OC further on less voltage as these mBIOSes have matured, this again is down to the replacement of the EBB. Typically the EBB I use is from the P5Q Premium, which uses 16 phase CPU voltage regulation. Clearly, asus undertook extensive tuning for the Premium. Using the EBB from the P5Q Premium allows users of the P5Q / Pro / -E (I think, forget if this is 16 phase or not) allows for the 8 phase designs to benefit from some of the additional tuning.
3. I think theres a few smaller things, but I forget what they are.

User experiences

This is naturally far too broad of a subject to cover fully so heres some bullet points of them main ones

* Better CPU clocking
* Better stability

 

[ShadowFold]

it says its not compatible , I was trying to flash it in the bios using EZ flash, any suggestions
thanks

Pretty sure the Turbo P5Q's are different. Not 100% sure tho!

 

[garrettm34]

P5Q WS (Workstation) Bios?

Hey Ket, I was wondering if you would modify the P5Q WS bios. Its one of the few P5Q motherboards you haven't used your Midas touch on. I'm having some troubles with my memory (f-ing Crucial Ballistix!!) and OCin my Q6600. It would be freaking sweet if you gave the P5Q WS bios a sprucing up. Peace out.

 

[KooolaNL]

Hey


Mine Computer configuration:
Asus P5Q Pro motherboard...
CPU = E8500 (3.16Ghz)
Ram = OCZ 2GB DDR2-1150 kit ==> x2 = 4gig
Power = OCZ 1000watt
Graphic card = Nvidia GTX295
Case = Antec 1200
CPU - Cooler = zalmann 9700

Bios information:
Version Bios = not sure
Build date = not sure

Processor:
Type = Intel (R) Core(TM)2 Duo CPU E8500 @ 3.16GHz
Speed = 4412Mhz
Count = 2

System Memory
Usable size = 4096MB

The settings I did use at mine BIOS! (AI TWEAKER)
1. AI Overclock tuner = Manual
2. FSB Frequency = 462
3. PCIE Frequency = 100 (We let it always standing on 100!)
4. FSB strap to North bridge = 333Mhz
5. DRAM FREQUENCY = DDR2-1110Mhz
6. DRAM timing control = MANUAL
- CAS# Latency = 5
- DRAM RAS # to CAS# Delay = 5
- DRAM RAS# Precharge = 5
- DRAM RAS# Activate to Precha = 18
7. CPU Voltage = 1.45625
8. FSB Termination voltage = 1.30
9. DRAM Voltage = 2.20
10. NB Voltage = 1.2
11. SB Voltage = 1.10

when making fsb higher i get not stable

u have any custom bios that alows higher

Greetz KooolaNL

 

[Frogger]

^^ I would push the voltage on the NB to 1.4 if you can

 

[KooolaNL]

What diff would that make

olso when @ 4.3 or 4.4ghz i notice lagg / crashes in almost everygame + desktop olso

 

[Lestat]

Hi evryone !

Thanks you for this thread and this forum. Excuse me for my bad english but i'm french i'll try to do the best.

I have a problem with my P5Q Pro. And i'm sure you can explain it to me and maybe help me :

My CPU is a Intel E8500 and i have windows Vista Ultimate 64 bit. I buy 2x 4 Go DDRAM II CORSAIR DOMINATOR (CM2X2048-85005D XMS2-5800 2048MB 1066 MHz 5-5-5-15 2.10V ver1.1 08420227).

When i just put on the motherboard 4GB i have no problem. But i put 6 or 8GB they are a lot of... it begin with a blue screen in windows, dispatched when i'm playing or listenning musics or watching movies (when i use the ram i think) and then my computer dont want to reboot : i push the power button and the PC turn on but the screen dont display anything... he just continue to be in sleep mode. The PC dont boot : he is just turn on and the hard drive dont charge etc... just turn on and the boot procedure dont work...

I withdraw one of the 4GB RAM and it maybe works. But if i want to use my PC i have to let just 4 GB on the motherboard !

I install your news modified flash bios and the problem is the same. So if someone know how to fix that problem, i'll be very usefull for me All my settings for RAM are in AUTO on the bios.

Thanks for your help !

Have a nice day

 

[KooolaNL]

Maybe something to do with dual channel not sure but memory slots is 2 colours it meaned somethin

 

[Stewartm]

ram

You say 6 or 8 G do you have other ram as well

if so remove it it may not like the timing

 

[KooolaNL]

lol

is the guy who makes modded bios even active ?

 

[debunker]

This may seem like a silly question, but will this BIOS work on a P5QL Pro? I am having a problem where the computer shows the Chassis intruded message whenever the computer is powered up, the jumpers are in place and the chassis intrusion switch isnt even wired up? If this isnt the correct BIOS or if this BIOS will make no difference to my problem could anyone patch a P5QL Pro bios so it doesnt check for chassis intrusion?

Thanks in advance