• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Gigabyte X58A UD7 + i7-920 Help

jrherras_iii

New Member
Joined
Jan 6, 2008
Messages
85 (0.01/day)
Location
Belleville, New Jersey
System Name Dunno :s
Processor I7-920 @ 4.2ghz
Motherboard Gigabyte X58A UD7
Cooling Corsair Hydro Series
Memory 1600mhz OCZ 6GB
Video Card(s) ATI Powercolor 5970 OC to 850/1200
Storage 128gb Patriot SSD (Boot drive) WD 300gb Velociraptor
Display(s) 28" Hanns-G
Case Thermaltake Armor Plus
Audio Device(s) On board =s
Power Supply Antec 850 watts
Software Windows 7 ultimate 64-bit
I have i7-920 D0 I need help on manual bios settings for this board I know this board is a revision of t previous model. I'm looking for a 4ghz speed I'm using Ocz 1600mhz ddr3 anybody can share bios setup? Thanks
 
Joined
Feb 19, 2006
Messages
6,270 (0.94/day)
Location
New York
Processor INTEL CORE I9-9900K @ 5Ghz all core 4.7Ghz Cache @1.305 volts
Motherboard ASUS PRIME Z390-P ATX
Cooling CORSAIR HYDRO H150I PRO RGB 360MM 6x120mm fans push pull
Memory CRUCIAL BALLISTIX 3000Mhz 4x8 32gb @ 4000Mhz
Video Card(s) EVGA GEFORECE RTX 2080 SUPER XC HYBRID GAMING
Storage ADATA XPG SX8200 Pro 1TB 3D NAND NVMe,Intel 660p 1TB m.2 ,1TB WD Blue 3D NAND,500GB WD Blue 3D NAND,
Display(s) 50" Sharp Roku TV 8ms responce time and Philips 75Hz 328E9QJAB 32" curved
Case BLACK LIAN LI O11 DYNAMIC XL FULL-TOWER GAMING CASE,
Power Supply 1600 Watt
Software Windows 10
I have i7-920 D0 I need help on manual bios settings for this board I know this board is a revision of t previous model. I'm looking for a 4ghz speed I'm using Ocz 1600mhz ddr3 anybody can share bios setup? Thanks

Try BCLK at 195
CPU voltage between 1.28 and 1.375(lower is better)
CPU to PLL 2.00
QPI/Dram 1.32

Then work your way to lowest stable voltage:toast:
no crying if you fry it tho!
 

jrherras_iii

New Member
Joined
Jan 6, 2008
Messages
85 (0.01/day)
Location
Belleville, New Jersey
System Name Dunno :s
Processor I7-920 @ 4.2ghz
Motherboard Gigabyte X58A UD7
Cooling Corsair Hydro Series
Memory 1600mhz OCZ 6GB
Video Card(s) ATI Powercolor 5970 OC to 850/1200
Storage 128gb Patriot SSD (Boot drive) WD 300gb Velociraptor
Display(s) 28" Hanns-G
Case Thermaltake Armor Plus
Audio Device(s) On board =s
Power Supply Antec 850 watts
Software Windows 7 ultimate 64-bit
I tried x20

bclk 200

vcore 1.28
QPI is auto ill try 1.32 if I get error

dram is 1.64
 
Joined
Feb 19, 2006
Messages
6,270 (0.94/day)
Location
New York
Processor INTEL CORE I9-9900K @ 5Ghz all core 4.7Ghz Cache @1.305 volts
Motherboard ASUS PRIME Z390-P ATX
Cooling CORSAIR HYDRO H150I PRO RGB 360MM 6x120mm fans push pull
Memory CRUCIAL BALLISTIX 3000Mhz 4x8 32gb @ 4000Mhz
Video Card(s) EVGA GEFORECE RTX 2080 SUPER XC HYBRID GAMING
Storage ADATA XPG SX8200 Pro 1TB 3D NAND NVMe,Intel 660p 1TB m.2 ,1TB WD Blue 3D NAND,500GB WD Blue 3D NAND,
Display(s) 50" Sharp Roku TV 8ms responce time and Philips 75Hz 328E9QJAB 32" curved
Case BLACK LIAN LI O11 DYNAMIC XL FULL-TOWER GAMING CASE,
Power Supply 1600 Watt
Software Windows 10

jrherras_iii

New Member
Joined
Jan 6, 2008
Messages
85 (0.01/day)
Location
Belleville, New Jersey
System Name Dunno :s
Processor I7-920 @ 4.2ghz
Motherboard Gigabyte X58A UD7
Cooling Corsair Hydro Series
Memory 1600mhz OCZ 6GB
Video Card(s) ATI Powercolor 5970 OC to 850/1200
Storage 128gb Patriot SSD (Boot drive) WD 300gb Velociraptor
Display(s) 28" Hanns-G
Case Thermaltake Armor Plus
Audio Device(s) On board =s
Power Supply Antec 850 watts
Software Windows 7 ultimate 64-bit
I got error with previous setup I'm now using x21 bclk 191
1.28vcore
1.35 QPI
IO 1.120

no error so far ill update thanks for the help
 
Joined
May 15, 2008
Messages
68 (0.01/day)
Location
Calumet City,IL 60409
System Name Lil Finger, 1st intel build
Processor B93 x4 AMD, 4770K INTEL
Motherboard biostar 790GX 128M ,Gigabyte Z87X-OC
Cooling CM Hyper 212 EVO, Stock cooling
Memory 8 gb Gskill pc8500 1066 4x2, 16GB Gskill 2133mkz 4x4GB
Video Card(s) XFX HD6870 1gb, Gigabyte RD R9 270X
Storage samsung 120gb ssd,seagate750, 1TB WD Black
Display(s) Toshiba 32" TV, Samsung Syncmaster 943BSW
Case NZXT beta evo, Raven RV03
Audio Device(s) on board,on board
Power Supply TX Corsairs 750 Watt, Seasonic 860 Watt Platinum
Mouse Logitech G 502
VR HMD Acer WMR,HP WMR,Oculus Quest
Software W7x64, W7 Ultimate X64
I'am looking to get that same board soon or an asus so any comments
 
Joined
Dec 27, 2007
Messages
8,519 (1.43/day)
Location
Kansas City
System Name The Dove Box Rev 3.0
Processor i7 8700k @ 4.7GHz
Motherboard Asus Maximus X APEX
Cooling Custom water loop
Memory 16GB 3600 MHz DDR4
Video Card(s) 2x MSI 780 Ti's in SLI
Storage 500GB Samsung 850 PCIe SSD, 4TB
Display(s) 27" Asus 144Hz
Case Enermax Fulmo GT
Audio Device(s) ON BOARD FTW
Power Supply Corsair 1200W
Keyboard Logitech G510
Software Win 10 64x
Binge, that needs to be in your sig for sure. It's helped many people understand the finer points on overclocking the X58 series.

Edit: I want pics! Thats a nice board there!!

Also, might try googling for a bios template. that would help.
 

jrherras_iii

New Member
Joined
Jan 6, 2008
Messages
85 (0.01/day)
Location
Belleville, New Jersey
System Name Dunno :s
Processor I7-920 @ 4.2ghz
Motherboard Gigabyte X58A UD7
Cooling Corsair Hydro Series
Memory 1600mhz OCZ 6GB
Video Card(s) ATI Powercolor 5970 OC to 850/1200
Storage 128gb Patriot SSD (Boot drive) WD 300gb Velociraptor
Display(s) 28" Hanns-G
Case Thermaltake Armor Plus
Audio Device(s) On board =s
Power Supply Antec 850 watts
Software Windows 7 ultimate 64-bit
I found the sweet spot

Advanced CPU Features:
CPU Clock Ratio ................................ [21 ]
Intel(R) Turbo Boost Tech ...................... [Enabled]
CPU Cores Enabled .............................. [All]
CPU Multi Threading .............................[Enabled]
CPU Enhanced Halt (C1E) ........................ [Disabled]
C3/C6/C7 State Support ......................... [Disabled]
CPU Thermal Monitor ............................ [Disabled]
CPU EIST Function .............................. [Disabled]
Virtualization Technology ...................... [Disabled]
Bi-Directional PROCHOT ......................... [Enabled]

Uncore & QPI Features:
QPI Link Speed ..............................[7.2GHz]
Uncore Clock Ratio ..........................[x16]
Uncore Frequency ............................[3200MHz]
Isonchronous Support ........................[Enabled]

Standard Clock Control:
Base Clock (BCLK) Control .......................... [Enabled]
BCLK Frequency (MHz) ................................[200]
PCI Express Frequency (MHz) ........................ [104]
C.I.A.2........................................... .. []

Advanced Clock Control:
CPU Clock Drive ..............................[800mV]
PCI Express Clock Drive ......................[900mV]
CPU Clock Skew ...............................[0ps]
IOH Clock Skew ...............................[0ps]

Advanced DRAM Features:
Performance Enhance ...................... [Turbo]
Extreme Memory Profile (X.M.P) ........... [Disabled]
System Memory Multiplier (SPD) ........... [8.0]
DRAM Timing Selectable (SPD) ............. [Quick]

Channel A + B + C

Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ......................[8]
tRCD ..................................[8]
tRP ...................................[8]
tRAS ..................................[20]
CR.....................................[1T]
B2B.....................................[]


Advanced Voltage Control:
CPU Intel Core i7 920 D0 Stepping
Load Line Calibration ................. [Level 2]
CPU Vcore ..............................[1.23750V]
QPI/VTT Voltage 1.150v .................[1.275V]
CPU PLL 1.800v .........................[1.500V]
PCIE 1.500v ............................[1.540V]
QPI PLL 1.100v .........................[1.140V]
IOH Core 1.100v ........................[1.200V]
ICH I/O 1.500v .........................[1.580V]
ICH Core 1.1v ..........................[1.200V]

DRAM
DRAM Voltage 1.500v ..............[1.640V]
DRAM Termination 0.750v...........[0.740V]
Ch-A Data VRef. 0.750v ...........[0.740V]
Ch-B Data VRef. 0.750v ...........[0.740V]
Ch-C Data VRef. 0.750v ...........[0.740V]
 

jrherras_iii

New Member
Joined
Jan 6, 2008
Messages
85 (0.01/day)
Location
Belleville, New Jersey
System Name Dunno :s
Processor I7-920 @ 4.2ghz
Motherboard Gigabyte X58A UD7
Cooling Corsair Hydro Series
Memory 1600mhz OCZ 6GB
Video Card(s) ATI Powercolor 5970 OC to 850/1200
Storage 128gb Patriot SSD (Boot drive) WD 300gb Velociraptor
Display(s) 28" Hanns-G
Case Thermaltake Armor Plus
Audio Device(s) On board =s
Power Supply Antec 850 watts
Software Windows 7 ultimate 64-bit
some of the pictures as requested





 
Joined
Feb 19, 2007
Messages
12,453 (1.99/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
I found the sweet spot

Advanced CPU Features:
CPU Clock Ratio ................................ [21 ]
Intel(R) Turbo Boost Tech ...................... [Enabled]
CPU Cores Enabled .............................. [All]
CPU Multi Threading .............................[Enabled]
CPU Enhanced Halt (C1E) ........................ [Disabled]
C3/C6/C7 State Support ......................... [Disabled]
CPU Thermal Monitor ............................ [Disabled]
CPU EIST Function .............................. [Disabled]
Virtualization Technology ...................... [Disabled]
Bi-Directional PROCHOT ......................... [Enabled]

Uncore & QPI Features:
QPI Link Speed ..............................[7.2GHz]
Uncore Clock Ratio ..........................[x16]
Uncore Frequency ............................[3200MHz]
Isonchronous Support ........................[Enabled]

Standard Clock Control:
Base Clock (BCLK) Control .......................... [Enabled]
BCLK Frequency (MHz) ................................[200]
PCI Express Frequency (MHz) ........................ [104]
C.I.A.2........................................... .. []

Advanced Clock Control:
CPU Clock Drive ..............................[800mV]
PCI Express Clock Drive ......................[900mV]
CPU Clock Skew ...............................[0ps]
IOH Clock Skew ...............................[0ps]

Advanced DRAM Features:
Performance Enhance ...................... [Turbo]
Extreme Memory Profile (X.M.P) ........... [Disabled]
System Memory Multiplier (SPD) ........... [8.0]
DRAM Timing Selectable (SPD) ............. [Quick]

Channel A + B + C

Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ......................[8]
tRCD ..................................[8]
tRP ...................................[8]
tRAS ..................................[20]
CR.....................................[1T]
B2B.....................................[]


Advanced Voltage Control:
CPU Intel Core i7 920 D0 Stepping
Load Line Calibration ................. [Level 2]
CPU Vcore ..............................[1.23750V]
QPI/VTT Voltage 1.150v .................[1.275V]
CPU PLL 1.800v .........................[1.500V]
PCIE 1.500v ............................[1.540V]
QPI PLL 1.100v .........................[1.140V]
IOH Core 1.100v ........................[1.200V]
ICH I/O 1.500v .........................[1.580V]
ICH Core 1.1v ..........................[1.200V]

DRAM
DRAM Voltage 1.500v ..............[1.640V]
DRAM Termination 0.750v...........[0.740V]
Ch-A Data VRef. 0.750v ...........[0.740V]
Ch-B Data VRef. 0.750v ...........[0.740V]
Ch-C Data VRef. 0.750v ...........[0.740V]

Nice, but let's see if that sweet spot is stable. Post a LinX or OCCT run Pleeez. :D
 
Top