- Joined
- Jun 5, 2007
- Messages
- 2,147 (0.35/day)
- Location
- Metro Manila, Philippines
System Name | Zangief (Reborn) |
---|---|
Processor | AMD Ryzen R7 1700X @ 3.825ghz , 1.35v |
Motherboard | Gigabyte GA-AX370 Gaming K7 Rev 1.0 BIOS F51e |
Cooling | Noctua NH-D15 Push / Push Config | 2x ML120 | 2x Phanteks 120 mm |
Memory | 2x8GB G.Skill Trident Z @ 3200mhz cl 16 @ 1.45v |
Video Card(s) | Gigabyte Aorus GTX 1080 +100 core / +550 mem |
Storage | 250 GB Samsung Evo 850 / 1tb WD Black / 4tb WD Blue / 512GB Adata XPG Pro SX8200 |
Display(s) | Acer Predator XB271HU |Asus VX239H 23" AH-IPS Led |
Case | Phanteks Enthoo Pro M TG |
Audio Device(s) | On Board Realtek HD / Logitech G633/G933 Gaming Headset / Corsair H70 Pro Wireless |
Power Supply | Corsair HX750i |
Mouse | Logitech G903 and G602 Wireless Gaming | Logitech Proteus Core G502 |
Keyboard | Corsair K70 Cherry Red | Corsair K70 RGB MK.2 Cherry Browns | Akko 3908N TTC Flame Reds |
Software | Windows 11 Pro |
^ Title, but please recommend only Mid-Towers.
I'm planning to move my items from specs to a newer case, I feel the 400r (altho good, it has been used for 2 builds/upgrade cycle already. This is it's 3rd.) a bit to crowded or cramped.
I was looking at Define R5 and it's BE variant, Meshify C. I fear that the noctua cooler would not fit the case.
As I have it set up right now it's in push push config on the tower sinks. And the 1st fan is slightly raised due to the TridentZ's sinks.
Any suggestions are very highly welcome.
P.S. also checked out some of InWin's offerings and some of the can support the nh-d15 but with the default fan and sink height of 165mm.
Also why not go AIO? Because I'm not comfy with them and vs. failure on fan cooled heatsinks if something fails it's just a fan replacement vs. the aio units.
Am not bothered by fan noise (I have a rattling electric fan behind me and even if I clean/oil the heck out of it it still does the noise).
Aslo does the side ventilation design of r5 and other cases that use the same front panel design would really be great impact for airflow?
My last option is a Corsair AIR 540, if I can find a local store who has stock for this.
Thanks alot TPU!
I'm planning to move my items from specs to a newer case, I feel the 400r (altho good, it has been used for 2 builds/upgrade cycle already. This is it's 3rd.) a bit to crowded or cramped.
I was looking at Define R5 and it's BE variant, Meshify C. I fear that the noctua cooler would not fit the case.
As I have it set up right now it's in push push config on the tower sinks. And the 1st fan is slightly raised due to the TridentZ's sinks.
Any suggestions are very highly welcome.
P.S. also checked out some of InWin's offerings and some of the can support the nh-d15 but with the default fan and sink height of 165mm.
Also why not go AIO? Because I'm not comfy with them and vs. failure on fan cooled heatsinks if something fails it's just a fan replacement vs. the aio units.
Am not bothered by fan noise (I have a rattling electric fan behind me and even if I clean/oil the heck out of it it still does the noise).
Aslo does the side ventilation design of r5 and other cases that use the same front panel design would really be great impact for airflow?
My last option is a Corsair AIR 540, if I can find a local store who has stock for this.
Thanks alot TPU!