-
Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
GPU-Z 2.12.0 No Fan Sensors for GTX 1080
- Thread starter Roxter
- Start date
- Joined
- May 14, 2004
- Messages
- 27,049 (3.71/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
Which NVIDIA driver version?
Primar13
New Member
- Joined
- Oct 12, 2018
- Messages
- 9 (0.00/day)
I can confirm this.
I am running an EVGA 1080 SC2 using the Drivers from 10/10/18
Driver 25.21.14.1634 (NVidia 416.34) / Win 10 64
Attached is a screenshot that has GPU-Z Versions 2.11.0 and 2.12.0 Running side by side. as well as showing the Sensor Options Available. Hopefully, it will be enough information.
(Weirdly enough GPU has always shown a sensor for a non-existant Middle fan)
I am running an EVGA 1080 SC2 using the Drivers from 10/10/18
Driver 25.21.14.1634 (NVidia 416.34) / Win 10 64
Attached is a screenshot that has GPU-Z Versions 2.11.0 and 2.12.0 Running side by side. as well as showing the Sensor Options Available. Hopefully, it will be enough information.
(Weirdly enough GPU has always shown a sensor for a non-existant Middle fan)
- Joined
- May 14, 2004
- Messages
- 27,049 (3.71/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
Can you check if an earlier driver works correctly? ie. version 399.24
- Joined
- May 14, 2004
- Messages
- 27,049 (3.71/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
go before 400, they changed the fan monitoring stuff with that
- Joined
- Jan 3, 2015
- Messages
- 2,886 (0.85/day)
| System Name | The beast and the little runt. |
|---|---|
| Processor | Ryzen 5 5600X - Ryzen 9 5950X |
| Motherboard | ASUS ROG STRIX B550-I GAMING - ASUS ROG Crosshair VIII Dark Hero X570 |
| Cooling | Noctua NH-L9x65 SE-AM4a - NH-D15 chromax.black with IPPC Industrial 3000 RPM 120/140 MM fans. |
| Memory | G.SKILL TRIDENT Z ROYAL GOLD/SILVER 32 GB (2 x 16 GB and 4 x 8 GB) 3600 MHz CL14-15-15-35 1.45 volts |
| Video Card(s) | GIGABYTE RTX 4060 OC LOW PROFILE - GIGABYTE RTX 4090 GAMING OC |
| Storage | Samsung 980 PRO 1 TB + 2 TB - Samsung 870 EVO 4 TB - 2 x WD RED PRO 16 GB + WD ULTRASTAR 22 TB |
| Display(s) | Asus 27" TUF VG27AQL1A and a Dell 24" for dual setup |
| Case | Phanteks Enthoo 719/LUXE 2 BLACK |
| Audio Device(s) | Onboard on both boards |
| Power Supply | Phanteks Revolt X 1200W |
| Mouse | Logitech G903 Lightspeed Wireless Gaming Mouse |
| Keyboard | Logitech G910 Orion Spectrum |
| Software | WINDOWS 10 PRO 64 BITS on both systems |
| Benchmark Scores | Se more about my 2 in 1 system here: kortlink.dk/2ca4x |
I can comfirm as well left fan is missing on EVGA GTX 1080 TI SC2 Gaming.
- Joined
- Oct 8, 2005
- Messages
- 234 (0.03/day)
- Location
- Amsterdam
| System Name | Gamer |
|---|---|
| Processor | Intel i9 9900K@4.9Ghz Offset voltage |
| Motherboard | Asus Rog Strix Z390-F |
| Cooling | Noctua NHD15S |
| Memory | Corsair Vengeance LPX 2x8GB 3200Mhz C16 |
| Video Card(s) | Asus TUF RTX3080 oc |
| Storage | 3x Seagate Barracuda 2TB, 512GB SSD Samsung 860evo/1TB nvme Samsung 970evo |
| Display(s) | Asus MG278Q |
| Case | CM Mastercase Pro 5 |
| Audio Device(s) | Onboard |
| Power Supply | Coolermaster V850 - 850Watt |
| Mouse | Logitech Hyperion G402 |
| Keyboard | Corsair K55 |
| Software | Windows10 Pro |
| Benchmark Scores | Firestrike Ultra: 11444 - Timespy: 18246 |
Same here, no fans on 2.12.0 with driver 411.70. Gpu-z 2.11.0 works fine, so I'll stay with that version.
- Joined
- May 14, 2004
- Messages
- 27,049 (3.71/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
Primar13
New Member
- Joined
- Oct 12, 2018
- Messages
- 9 (0.00/day)
Well. Wizard. I'm sorry.
I was in a hurry when I initially tested the pre-release build and a Mistake was made.
Both This Test Version, (and 2.13) are not reading fan speed correctly.
The Sensors are back in the list, and show up within GPU-Z but they are not showing any data. I should have caught this, but I didn't.
Test Version:
View attachment 108764
2.13
View attachment 108765
I was in a hurry when I initially tested the pre-release build and a Mistake was made.
Both This Test Version, (and 2.13) are not reading fan speed correctly.
The Sensors are back in the list, and show up within GPU-Z but they are not showing any data. I should have caught this, but I didn't.
Test Version:
View attachment 108764
2.13
View attachment 108765
- Joined
- May 14, 2004
- Messages
- 27,049 (3.71/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
anyone else?
- Joined
- May 14, 2004
- Messages
- 27,049 (3.71/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
Man you scared me
Primar13
New Member
- Joined
- Oct 12, 2018
- Messages
- 9 (0.00/day)
Man I was running around trying to figure out what happened. I was going NUTS.
It was not working on 2.13, or 2.12, or 2.12TEST, or even 2.11
It wasn't working anywhere. I updated the Drivers... Nothing...
It seems that for whatever reason, and through the power of Murphey, and his Gremlins... My Graphics Card decided to change it's own Fan Curves so that none of the fans come on til the GPU is at 65C.
I'm not sure why, I'm not sure HOW.... but that seems to be what happened. Now I'm trying to figure out how to revert it.