- Joined
- May 8, 2016
- Messages
- 1,873 (0.61/day)
System Name | BOX |
---|---|
Processor | Core i7 6950X @ 4,26GHz (1,28V) |
Motherboard | X99 SOC Champion (BIOS F23c + bifurcation mod) |
Cooling | Thermalright Venomous-X + 2x Delta 38mm PWM (Push-Pull) |
Memory | Patriot Viper Steel 4000MHz CL16 4x8GB (@3240MHz CL12.12.12.24 CR2T @ 1,48V) |
Video Card(s) | Titan V (~1650MHz @ 0.77V, HBM2 1GHz, Forced P2 state [OFF]) |
Storage | WD SN850X 2TB + Samsung EVO 2TB (SATA) + Seagate Exos X20 20TB (4Kn mode) |
Display(s) | LG 27GP950-B |
Case | Fractal Design Meshify 2 XL |
Audio Device(s) | Motu M4 (audio interface) + ATH-A900Z + Behringer C-1 |
Power Supply | Seasonic X-760 (760W) |
Mouse | Logitech RX-250 |
Keyboard | HP KB-9970 |
Software | Windows 10 Pro x64 |
There is disconnect between what GPU-z shows as "GPU Chip Power Draw" on Nvidia and AMD GPUs.
Examples:
1) RX 6700 XT
2) RTX 3070 Ti :
In short : "GPU Chip Power Draw" on AMD means [TGP] (or maximum TDP allowed for GPU), while on Nvidia it means "GPU only".
To get proper comparison between both power draws on AMD and NV, under GPU-z - you have to compare AMD's "GPU Chip Power Draw", to Nvidia's "Board Power Draw" - which is counter intuitive from naming sense, and confusing.
I would like to point out HWInfo64 does show [GPU ASIC Power], [TGP] and [GPU PPT] as the same value as GPU-z "GPU Chip Power", while [GPU Core Power] under HWInfo64 is more inline with what I think "GPU Chip Power" on Nvidia cards under GPU-z is.
Thank you for any type of fix for this (easy name change, or changing sensor for "GPU Chip Power Draw" data and add proper one for [TGP] separately ?).
Examples:
1) RX 6700 XT
2) RTX 3070 Ti :
In short : "GPU Chip Power Draw" on AMD means [TGP] (or maximum TDP allowed for GPU), while on Nvidia it means "GPU only".
To get proper comparison between both power draws on AMD and NV, under GPU-z - you have to compare AMD's "GPU Chip Power Draw", to Nvidia's "Board Power Draw" - which is counter intuitive from naming sense, and confusing.
I would like to point out HWInfo64 does show [GPU ASIC Power], [TGP] and [GPU PPT] as the same value as GPU-z "GPU Chip Power", while [GPU Core Power] under HWInfo64 is more inline with what I think "GPU Chip Power" on Nvidia cards under GPU-z is.
Thank you for any type of fix for this (easy name change, or changing sensor for "GPU Chip Power Draw" data and add proper one for [TGP] separately ?).
Last edited: