- Joined
- Jun 22, 2018
- Messages
- 31 (0.01/day)
Processor | İntel İ3 9100 F (Not overclock) |
---|---|
Motherboard | ASUS B365M-K |
Memory | KİNGSTON 8 GB DDR4 2400 MHZ |
Video Card(s) | MSI RX570 ARMOR 8 GB 256 BİT |
Storage | SEAGATE 1 TB HDD 7200 RPM |
Case | THERMALTAKE V2 PLUS |
Power Supply | THERMALTAKE V2 PLUS (CASE'S PSU) |
Software | WİNDOWS 10 PRO X64 |
Hello.I dont know English.I'm sorry.(google translate )
I made a bios update on my display card. but then the windows started not to boot. Does not boot when the video card is installed. It only boots with the integrated card. NVFlash does not recognize your external graphics card on DOS and Windows. Does not appear in the device manager. Does this command work? "nvflash -i0 -4 -5 -6 bios.rom or nvflash -f bios.rom"
Note: Can I do this while the monitor is inserted in the integrated card? because windows does not boot up when I connect it to the video card or install additional power cable (the system is very loud when power cable is not connected)
I made a bios update on my display card. but then the windows started not to boot. Does not boot when the video card is installed. It only boots with the integrated card. NVFlash does not recognize your external graphics card on DOS and Windows. Does not appear in the device manager. Does this command work? "nvflash -i0 -4 -5 -6 bios.rom or nvflash -f bios.rom"
Note: Can I do this while the monitor is inserted in the integrated card? because windows does not boot up when I connect it to the video card or install additional power cable (the system is very loud when power cable is not connected)