Gtx 1070ti Display port no signal

[bubuie]

Hey guys,

So I got G2460PF AOC monitor 144 hz, i used to have DVI on it was running perfectly with it, i bought display port cable today and when i plugged it in it says no signal, tried both Display port inputs on Graphics card , and even on motherboard but still nothing , I have asus maximus IX hero Motherboard,

P.S They tested display port and it is working fine .

 

[Durvelle27]

Try plugging the DVI cable back in and dropping the Resolution an than try the DP again

 

[VulkanBros]

Have you tried using an other DP cable?
I had the same issue - then I tried nVidia´s DP port update: https://www.nvidia.com/object/nv-uefi-update-x64.html - that worked for me
Dont know if it is necessary for a 1070 tho.....

 

[coonbro]

''P.S They tested display port and it is working fine .'' on the card ? monitor ? the cable on there stuff ?

if you look around ports not working goes back to the NVidia 900 series . lot of guys with this [sadly I use a dvi-I to hdmi on mine still even under this 4k ..lol.. ]

I googled ''G2460PF AOC monitor displayport not working'' a few threads on it as well . one may offer a best answer to help ?

try what monkey100 said seems to helped others ?

ttps://www.reddit.com/r/ultrawidemasterrace/comments/6mzy1o/display_port_no_signal_suddenly_aoc_35_1440p/?st=jlnx9ggs&sh=1763dcda#bottom-comments

your not alone on these port issues just finding the right reason why is the trick


just to add may shut down reboot to safe mode then reshut down unhook what your using and hook up the display port cable then reboot and see if the NVidia driver catches the change or instead of safe mode just first uninstall the driver do the cable swap boot back up and reinstall the NVidia driver [if win-10 ??????? your on your own with that malware service ]

 

[bubuie]

Tried different cable, updated firmware ( said already updated ) , safe mode etc etc, last time I had DP cable it was giving only 60 hz , that's why I updated the DP to get 144 hz

 

[coonbro]

I looked at a few more on this and seems like you turn off the monitor and all for like 2- 5 min. ? I just got back to like the 3ed one from NVidia forums with that answer and all said it worked for them ?

just so many and so many resolves if so...

https://forums.geforce.com/default/...-gtx-1070-no-signal-when-using-displayport/2/

post after post

maybe just go with this and cut the chase ?

Certified

18Gbps

compare to the rest for 10 bucks or so / no thrills full hdmi speced .
https://www.amazon.com/Monoprice-11...01GCGKI3O/ref=cm_cr_arp_d_product_top?ie=UTF8

 

[eidairaman1]

Make sure to switch the input on monitor using source key

If you need further assistance heres your manual, Contact AOC. Switch to a different cable (somtimes they are defective)

https://www.google.com/url?sa=t&sou...FjAAegQIBBAB&usg=AOvVaw24b2Ap2OdOAgTUoXfhPg-E

 

[coonbro]

unless I missed it this manual shows to be just plug and play

https://www.manualslib.com/manual/1099940/Aoc-G2260vwq6.html?page=12#manual

maybe see if aco has a new updated driver you may need for todays use with it ? like something needed for malware use [I mean win-10 ]

sadly they don't allow to review the notes of any driver its download /use at own risk

http://www.aocmonitorap.com/my/download_driver.php

may look at this ?

https://www.techpowerup.com/forums/...ios-update-can-fix.244981/page-2#post-3853540