3volvedcombat
New Member
- Joined
- May 10, 2009
- Messages
- 1,514 (0.28/day)
- Location
- South California, The desert.
System Name | My Computer |
---|---|
Processor | Core 2 Q9550 4Ghz 1.23volts |
Motherboard | Gigabyte |
Cooling | Corsair |
Memory | OCZ |
Video Card(s) | Galaxy |
Storage | Western Digital |
Display(s) | Acer |
Case | Lian li |
Audio Device(s) | Asus |
Power Supply | Corsiar |
Software | Microsoft |
Benchmark Scores | 25,000 3dmark06 at 4.35Ghz processor, 835core card! |
From what ive seen on some forums and threads, some people have modded there H50 water coolers for the better look and sometimes better performance.
Right now just to get this strait, i know this voids the warrenty, i know this will make it were i have to refill the loop, and i KNOW that fungi and damage might occure in the loop, and im fine with those risk.
BELOW is the parts im planning on buying to at least get started on this loop, i have a RES, the tubing, tubing coils, fittings for the RES, some tygon 1.4" ID hose, and some feser anti corrosian fluid.
Im going to be going out and buying a bottle of FIJI or lifewater that is partical free so im using distiled water for the loop, and nuking it with feser anti corrosive.
My first question is, Should i use wire ties to close the loop on the barbs from the ressy to the pump to the radiator, or should i spare out a little more coin for some clamps from frozencpu.com
My second question is the pump on this corsair H50/astec rename runs at 1400 RPM on 12v 24/7 inclosed SO could it have enough power to add a second 120mm radiator to the loop using the same corsair H50 pump or will it over stress the pump and potentually fry the main part of the lube?
The plant looks to be for me to find a swiftech or blackice 2x120mm radiator, a radbox, and everything else included in the above list, ~!
Right now just to get this strait, i know this voids the warrenty, i know this will make it were i have to refill the loop, and i KNOW that fungi and damage might occure in the loop, and im fine with those risk.
BELOW is the parts im planning on buying to at least get started on this loop, i have a RES, the tubing, tubing coils, fittings for the RES, some tygon 1.4" ID hose, and some feser anti corrosian fluid.
Im going to be going out and buying a bottle of FIJI or lifewater that is partical free so im using distiled water for the loop, and nuking it with feser anti corrosive.
My first question is, Should i use wire ties to close the loop on the barbs from the ressy to the pump to the radiator, or should i spare out a little more coin for some clamps from frozencpu.com
My second question is the pump on this corsair H50/astec rename runs at 1400 RPM on 12v 24/7 inclosed SO could it have enough power to add a second 120mm radiator to the loop using the same corsair H50 pump or will it over stress the pump and potentually fry the main part of the lube?
The plant looks to be for me to find a swiftech or blackice 2x120mm radiator, a radbox, and everything else included in the above list, ~!
Last edited: