Me first C2D setup, but i've bin oc'ing for quite a long time now. Very please with this chip, hunted down a week 25 b2 e6300 - and here's my reward
Im running the following:
gigabyte ds3 - original bios, heatsinks, everything.
E6300 L625 Stepping B2
2x1GB Corsair XMS2 PC6400 (5-5-5-12, not the goodie good stuff )
Bfg 7900GT
Highpower 500w psu (46a @ 3 12v lines !!!)
6.4GB UDMA66 5400 rpm drive.... dont ask :shadedshu .
36x cdrom.... ditto.
Crapload of fans
Aerogate 3
Mobo tray from project nsanepc (http://www.xtremepc.org/forum/t1491-project-nsanepc-the-worklog.html and http://www.xtremepc.org/forum/showthread.php?t=2590)
First off, this is all on the retail heatsink. I popped the fan off and used my own setup as seen below
Current oc on that setup - 3.47 ghz @ 1.3325 prime stable (vfsb +.3; vmch +.3; vdimm +.3 495fsb (x2) x 7) , 3.57 postable but bsods on windows startup. This is all on stock mind u, with some fans.
Absolute MAX'd fsb so far - 530mhz superpiable. Doesnt even post above that :O - gonna get the f7 when i get a loppy drive
Ok, here are some screens at 3.43 ;D
16MS superpi ftw!!!
Hehe. 31000 mflops. The conroe xtreme x6800 which is like 1300 bucks right now - 26000. Cold. Just cold.
Old ram result, at 490fsb 6-8-8-20. The above superpi is at 490/6-5-5-12
But the 6.4 gb 5400rpm hdd just embarrases the whole rig. Good thing my 2x160gb sata's are flying in this instant!
Thats about it for my oc adventure.
PS: The e63+ds3+ram were bought for 400USD shipped.
PS: For next time, ima post my results with my water setup which im assembling (all has arrived) - D5/TDX/Maze4 Chipset/BIX 3x120/1/2"ID/Primoflex/3x120mm 135cfm 45db fans
With 530 fsb, im already almost guaranteed 3.7ghz.... with a new bios.... Voltmod for ds3 planned of course...
Thats it, i gtg sleep, enjoy and marvel
Im running the following:
gigabyte ds3 - original bios, heatsinks, everything.
E6300 L625 Stepping B2
2x1GB Corsair XMS2 PC6400 (5-5-5-12, not the goodie good stuff )
Bfg 7900GT
Highpower 500w psu (46a @ 3 12v lines !!!)
6.4GB UDMA66 5400 rpm drive.... dont ask :shadedshu .
36x cdrom.... ditto.
Crapload of fans
Aerogate 3
Mobo tray from project nsanepc (http://www.xtremepc.org/forum/t1491-project-nsanepc-the-worklog.html and http://www.xtremepc.org/forum/showthread.php?t=2590)
First off, this is all on the retail heatsink. I popped the fan off and used my own setup as seen below
Current oc on that setup - 3.47 ghz @ 1.3325 prime stable (vfsb +.3; vmch +.3; vdimm +.3 495fsb (x2) x 7) , 3.57 postable but bsods on windows startup. This is all on stock mind u, with some fans.
Absolute MAX'd fsb so far - 530mhz superpiable. Doesnt even post above that :O - gonna get the f7 when i get a loppy drive
Ok, here are some screens at 3.43 ;D
16MS superpi ftw!!!
Hehe. 31000 mflops. The conroe xtreme x6800 which is like 1300 bucks right now - 26000. Cold. Just cold.
Old ram result, at 490fsb 6-8-8-20. The above superpi is at 490/6-5-5-12
But the 6.4 gb 5400rpm hdd just embarrases the whole rig. Good thing my 2x160gb sata's are flying in this instant!
Thats about it for my oc adventure.
PS: The e63+ds3+ram were bought for 400USD shipped.
PS: For next time, ima post my results with my water setup which im assembling (all has arrived) - D5/TDX/Maze4 Chipset/BIX 3x120/1/2"ID/Primoflex/3x120mm 135cfm 45db fans
With 530 fsb, im already almost guaranteed 3.7ghz.... with a new bios.... Voltmod for ds3 planned of course...
Thats it, i gtg sleep, enjoy and marvel