- Joined
- May 14, 2012
- Messages
- 891 (0.20/day)
- Location
- US
Processor | AMD Ryzen 5 1600X |
---|---|
Motherboard | AsRock X370 Taichi |
Cooling | Corsair H60 Liquid Cooling |
Memory | 16 GB CORSAIR Vengeance LPX 3000 Mhz (Running at 2933) |
Video Card(s) | EVGA FTW2 GTX 1070Ti |
Storage | 740GB of SSDs, 7 TB's of HDDs |
Display(s) | LG 27UD58P-B 27” IPS 4K |
Case | Phanteks Enthos Pro M |
Audio Device(s) | Integrated |
Power Supply | EVGA 750 P2 |
Mouse | Mionix Naos 8200 |
Keyboard | G Skill Ripjaws RGB Mechanical Keyboard |
Software | Windows 10 Pro |
I have a computer that I just built. Most of the components are used except for the HDD and the PSU. I am having a problem with trying to get it to display on the monitor I use. The specs are as follows:
MSI 785g-E53 motherboard
G. Skill RAM DDR3 2 x 4GB
AMD Phenom II X4 955
AMD XFX 6950 reference design
Coolermaster Hyper 212+
Corsair CX600
When I start it up, everything turns on fine and dandy but there is no display. I tried to use the two different DVI ports and even the HDMI port on the GPU. Nothing. I tried the DVI, VGA, and HDMI on the motherboard and nothing as well. The GPU is correctly seated, same goes for the cpu, and i made sure that the RAM is in the right slots. I ended up getting another pc that works for sure and swapped the GPUs and nothing. I put the 6950 in the pc that works and nothing. I even put the working GPU from the PC that works in the computer that doesn't display anything and nothing. I think it may be something with the motherboard. It has some LEDs on the mobo but when I turn them on, all of them are on. This doesn't make sense to me.
I did get the CPU, GPU, RAM, Mobo, and case all together from somebody that just gutted their system of the HDD and PSU when they upgraded. Everything worked and all - at least I think. Any suggestions? I am gonna swap out CPUs since I have another CPU that fits that socket available.
MSI 785g-E53 motherboard
G. Skill RAM DDR3 2 x 4GB
AMD Phenom II X4 955
AMD XFX 6950 reference design
Coolermaster Hyper 212+
Corsair CX600
When I start it up, everything turns on fine and dandy but there is no display. I tried to use the two different DVI ports and even the HDMI port on the GPU. Nothing. I tried the DVI, VGA, and HDMI on the motherboard and nothing as well. The GPU is correctly seated, same goes for the cpu, and i made sure that the RAM is in the right slots. I ended up getting another pc that works for sure and swapped the GPUs and nothing. I put the 6950 in the pc that works and nothing. I even put the working GPU from the PC that works in the computer that doesn't display anything and nothing. I think it may be something with the motherboard. It has some LEDs on the mobo but when I turn them on, all of them are on. This doesn't make sense to me.
I did get the CPU, GPU, RAM, Mobo, and case all together from somebody that just gutted their system of the HDD and PSU when they upgraded. Everything worked and all - at least I think. Any suggestions? I am gonna swap out CPUs since I have another CPU that fits that socket available.