- Joined
- Feb 5, 2008
- Messages
- 173 (0.03/day)
- Location
- Miami, FL
Processor | i5 6700K |
---|---|
Motherboard | ASUS Z270 PRIMER |
Cooling | Cooler Master Hyper N520 |
Memory | 32GB DDR4 CORSAIR Vengeance |
Video Card(s) | EVGA GTX 1060 6GB SSC |
Storage | Samsung EVO 970 1TB + 1 TB PNY SSD |
Display(s) | MSI Optix G241 |
Case | CORSAIR Carbide Series 678C |
Power Supply | EVGA SuperNOVA 1000@ |
Software | Windows 11 |
Heya all! My dad just bought a new PC, his build is:
CPU: Q6600 G0
MOBO: Gigabyte EP45-UD3R
RAM: Corsair Dominators PC8500@1066 MHz (2x2GB)
Cooler: Artic Cooling Freezer 7 Pro
I wanted to OC, then I started RealTemp before OCing it to take a look at the temps, so I though that those temps were quite high, and decided to run OCCT to take a look at the temps when the CPU its@100%, so far, these are the results after 5 mins of running OCCT:
I think that those temps are quite high for the CPU, but I would like to be sure about that.
If those temps are high, what could be the problem? I mean, the case has a good airflow, and I did a good cable management while installing the PC, I could attach a pic later if you guys want me to.
Also the PC takes a lot of time to start and to shut down the system, is that problem related to the temps?
Thx a lot for ur help guys
CPU: Q6600 G0
MOBO: Gigabyte EP45-UD3R
RAM: Corsair Dominators PC8500@1066 MHz (2x2GB)
Cooler: Artic Cooling Freezer 7 Pro
I wanted to OC, then I started RealTemp before OCing it to take a look at the temps, so I though that those temps were quite high, and decided to run OCCT to take a look at the temps when the CPU its@100%, so far, these are the results after 5 mins of running OCCT:
I think that those temps are quite high for the CPU, but I would like to be sure about that.
If those temps are high, what could be the problem? I mean, the case has a good airflow, and I did a good cable management while installing the PC, I could attach a pic later if you guys want me to.
Also the PC takes a lot of time to start and to shut down the system, is that problem related to the temps?
Thx a lot for ur help guys