- Joined
- Mar 9, 2013
- Messages
- 340 (0.08/day)
- Location
- Central Illinois
Processor | AMD FX-8370 Black Edition |
---|---|
Motherboard | MSI 990FXA Gaming Board |
Cooling | Corsair H-105 liquid cooler |
Memory | Gskill ripjaws 16GB 1866 RAM |
Video Card(s) | EVGA GTX 980 Ti FTW |
Storage | Samsung 840 250GB SSD/ Samsung 850 EVO 500GB Storage |
Display(s) | Acer 25 inch 2560x1440 |
Case | Corsair 760-T |
Audio Device(s) | onboard |
Power Supply | EVGA Supernova Full Modular 750w |
Mouse | CM Storm |
Keyboard | CM Storm |
*Update* I bought a new board. I got the Asrock 970 Extreme4 for $60 brand new.
So far so good!
I recently put together an AMD system.
Specs are as follow.
MSI 970A G43 motherboard
AMD FX-4130 w/ Cooler Master Hyper 212 plus 120mm fan.
Crucial Ballstix Sport 8GB @ 1600mhz
Graphics is an MSI GTX 560 Ti 448 core OC Power Edition. (currently OC'd to 840 mhz from 750 stock) and is stable with very nice temps in the 50's in game and low to mid 30's at idle.
Antec EA-650 watt PSU
Case is an MSI Interceptor Ravager with two 120mm Intake fans. One side, one front.
Three 120mm Exhaust fans. One rear exhaust, two top exhaust.
I currently have it clocked to 4.2 ghz and stable.
But, I am looking to get more out of this beast without damaging the system.
I am not scared to increase voltage etc. just looking for a little guidance in doing so.
TIA for any and all input
So far so good!
I recently put together an AMD system.
Specs are as follow.
MSI 970A G43 motherboard
AMD FX-4130 w/ Cooler Master Hyper 212 plus 120mm fan.
Crucial Ballstix Sport 8GB @ 1600mhz
Graphics is an MSI GTX 560 Ti 448 core OC Power Edition. (currently OC'd to 840 mhz from 750 stock) and is stable with very nice temps in the 50's in game and low to mid 30's at idle.
Antec EA-650 watt PSU
Case is an MSI Interceptor Ravager with two 120mm Intake fans. One side, one front.
Three 120mm Exhaust fans. One rear exhaust, two top exhaust.
I currently have it clocked to 4.2 ghz and stable.
But, I am looking to get more out of this beast without damaging the system.
I am not scared to increase voltage etc. just looking for a little guidance in doing so.
TIA for any and all input
Last edited: