help wanted modding 9600 se

[santaclaws]

I have a radeon 9600 se GeCube with a R350 core. Some specs:
128 RAM/128 bits
pixel shader/vertex shader 2.0
default:324/ 203 oc:390/252
4 pipelines
modded drivers from gameguru


It's curious how I dont get artifacts at all at 390/252 but with slighter higher settings I get them almost instantly. Could this be from BIOS locks? I know for sure It's not from high temperature.
Anyway, could I/should I flash the BIOS to 9600/9600 PRO/9600 XT? And when doing so can I unlock some pipelines? When doing so is it possible to wreck my card?


PS: I'm a totally noob with oc and modding so any information would help

 

[Anarion]

coz u have 128b mem then u can flash to .... btw i could easily reach @ 474 core & mem @ 254 ....@ gigabyte brand... btw al of this with just a 7.6v(very slow & qiuet) 2.5cm*2.5cm fan!

 

[santaclaws]

How can I be sure about wether it's 128/64 bits? On the box and manual it's "128-bit full floating point(...)" and ATI tool reports "64 bit memory bus". I also checked out some sites and I saw only 128 bits/128 RAM GeCube 9600 SEs. And what can I mod it into? NP, PRO or SE? Can you recommend a BIOS?

 

[Anarion]

fpu is somtin else ,if atitool say then almost u must admit it's a 64 bit
i dunno about sites & wat they say ....about mod or pipe line i think u r wrong it's a RV350 nor R350 then afaik there no mod for rv35 ...just oc it,

btw for u to belive ithas a 64b use other progs like Powerstrip,rivatuner or use debug! if u know how ....

 

[SPHERE]

cause you have 64-bit mem there is no higher card you can flash to and there are only 4/2 pipes on that core to begin with so there are none to unlock

 

[AceFactor]

Just clock it up to 9600xt speeds using ATi Tool, or use Rabit to change the clock speeds on your bios - a more permanent option

And the 9600xt clock speeds are: 300/500 , GPUY and Memory respectively

Adam

 

[santaclaws]

Yeah, it's RV350 and 64 bits. Instead it has 4 pipelines and it works fine oc'd to 402/252 (core/mem). That from 324/252.

Thanks

 

[SPHERE]

Just clock it up to 9600xt speeds using ATi Tool, or use Rabit to change the clock speeds on your bios - a more permanent option

And the 9600xt clock speeds are: 300/500 , GPUY and Memory respectively

Adam

you mean 500 core/600(300) mem right

 

[AceFactor]

Yeh. .soz, typo

-Adam