- Joined
- Nov 5, 2015
- Messages
- 501 (0.16/day)
- Location
- Skopje, Macedonia
System Name | The Tesseract Cube |
---|---|
Processor | AMD Ryzen 5 3600 |
Motherboard | MSI X570A-PRO |
Cooling | DeepCool Maelstrom 240mm, 2 X DeepCool TF120S (radiator fans), 4 X DeepCool RF120 (case fans) |
Memory | 2 x 16gb Kingston HyperX 3200mhz |
Video Card(s) | Sapphire Radeon RX 6800 Nitro + 16GB |
Storage | Corsair MP400 G3 1TB, Western Digital Caviar Blue 1TB |
Display(s) | MSI MAG241C Full HD, 144hz FreeSync |
Case | DeepCool Matrexx 55 |
Audio Device(s) | MB Integrated, Sound Blaster Play 3 (Headset) |
Power Supply | Corsair CX650M Modular 80+ Bronze |
Mouse | Corsair Dark Core Pro Wirless RGB |
Keyboard | MSI GK30 Mecha-Membrane |
Software | Windows 10 Pro |
Benchmark Scores | CPUZ: Single Thread - 510 Multi Thread - 4.050 Cinebench R20: CPU - 3 500 score |
Since i run an old i5 750, my RAM is downclocked to 1333mhz, and i like to get it to 1600 mhz stock for my Hyper X Black Fury.
Now ive tried in the past, but every time i raise the bus and lower the multiplier of the CPU so the CPU can run at stock 2.6, it always comes to instability issue.
I also tried to raise the voltage to 1.5 or 1.6 since that is stock for the RAM, and it still causes instability issue.
It has a problem booting, but when it boots, it works fine and it has no problem running games, rendering, stress test and such, only on boot.
And trying to boot it, it won't beep 3 times, amd after the 3rd boot, it says OC has failed, so i have to try to load it again to work.
Need advice
Now ive tried in the past, but every time i raise the bus and lower the multiplier of the CPU so the CPU can run at stock 2.6, it always comes to instability issue.
I also tried to raise the voltage to 1.5 or 1.6 since that is stock for the RAM, and it still causes instability issue.
It has a problem booting, but when it boots, it works fine and it has no problem running games, rendering, stress test and such, only on boot.
And trying to boot it, it won't beep 3 times, amd after the 3rd boot, it says OC has failed, so i have to try to load it again to work.
Need advice