• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

How To Clean The Dust From Your Pc

Joined
Mar 27, 2007
Messages
2,753 (0.44/day)
Location
louisiana
Processor Intel Core i7-4790 Haswell Quad-Core 3.6GHz LGA 1150 84W
Motherboard GIGABYTE GA-H87-D3H LGA 1150 Intel H87 HDMI
Cooling CPU - Cooler Master Hyper T4 / Case - cooler master 120mm rear case fan (Air cooling)
Memory 32GB (4 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
Video Card(s) GTX1060 6GB
Storage Samsung 512 GB 840 PRO SSD Main Drive and Samsung 512 GB 840 EVO SSD Backup Drive
Display(s) ASUS 23" LED Monitor
Case COOLER MASTER Centurion 5 (silver & black)
Audio Device(s) (onboard audio) Realtek ALC892
Power Supply CORSAIR SU-750TX 750W ATX12V / EPS12V
Software Windows 10 Home Premium 64bit Edition
How To Safely Clean The Dust From Your PC

HOW TO SAFELY CLEAN THE DUST FROM YOUR PC

cleaning tools: soft 1" long bristle paint brush/ compressed air or "air in a can" / floor fan / dust mask

I recommend that you bring your computer outside or into the garage so that all that dust your about to stir up isn't left in your room flying around because that dust is just waiting for a chance to get right back into your clean computer. It’s a good idea to put a floor fan behind you set on low speed to blow the airborne dust away from you and the computer and it is advised that you wear a dust mask while doing this or you will be sneezing all night lol.

You can use a compressed air tank to blow out the dust as long as you don’t get too close with the nozzle so stay at least 8-12" away from everything at all times and you keep it under 30lbs of tank pressure so it wont bend capacitors or hurt anything. its much safer to use a shop vac on the blow setting or a leaf blower on the low/soft setting if you feel the need to blow it out

Before starting you should count the number of jumpers on mobo if yours has then and take note of the tiny connector pin locations in case one should come off during the cleaning process.

Use a good soft 1" long bristle paint brush and wipe clean the motherboard itself along with any wires, empty ram or pci slots, pci cards or video cards. Take your time to brush out all your heat sink fins very well removing the fan to clean it and the heat sink better.

Also brush off all wires, fans and fan blades, its like dry washing it and you should clean everything to get rid of all dust. If the brush gets dusty blow it off with the air and wipe it on a dry towel to clean it off.

Now remove the front faceplate on the case to clean it and the front side of the frame and don't forget to clean the inside of the case itself (floor, top, sides, and case fans) with the paintbrush and some air.

NOTE: if you cant or don’t want to bring your computer outside or to the garage then it can be cleaned with a shop vac and attachments but be carefull because a vacuum can, if you are not careful, pull the small wires loose from the motherboard pinouts or suck the jumpers off of the board so make a note of where and how everything is plugged into.

Another big negative to vacuum cleaning is of course it makes a lot of noise. anytime you use a vacuum cleaner the air causes some friction as it moves against rough or uneven surfaces so I also duct tape a small piece of old rubber hose (I use old garden hose) onto the end of the vacuum hose to further insulate it from possible static charge buildup. Use a hand held brush to do the actual cleaning then the vacuum to remove the loose dust and to clean the tough spots. Sometimes the brush gets trashed but it’s the gentlest way to really get aluminum block heat sink fins clean and for cleaning fan blades.

For cleaning those big radiator finned heat pipe cpu coolers, when they get really bad with dust you just take them off and let soak for an hour under warm soapy water and all that dusty film comes loose and it will wipe clean with just a soft paint brush passed back and forth like brushing teeth. To remove any remaining residue to finish cleaning, just put it in the sink with the spray nozzle and hot water. It will come out like new again.

Now is a good time to add more shine to your computer by just using automotive car wax on the painted parts of your case. It shines and it will help prevent scratching. Remember to watch the dust when you’re wiping it off so that it doesn’t get into your clean computer.

NOTE: you can also open the PSU to clean it if you have to but it should always be avoided if you don't have to and if you are going to open it remember that it can hold a charge for a long time and it can KILL YOU so its not something to do just for the heck of it. when opening it turn off the power and unplug the cord and wait a full 24 hours to be sure the power has been discharged and even then some capacitors may be holding a charge so when working on it you still are supposed to be wearing rubber gloves just to be safe so you don't get shocked.
 
Last edited:
Joined
Sep 8, 2007
Messages
299 (0.05/day)
Location
Israel
System Name ¯\_(ツ)_/¯
Processor AMD Ryzen 7 7800X3D
Motherboard MSI MEG X670E Ace
Cooling EK Nucleus CR360
Memory 64GB DDR5 Corsair Dominator Titanium 6000Mhz CL30 1.4v
Video Card(s) Asus RTX 4090 ROG Strix OC
Storage Samsung 990 Pro 2TB \ Kingston KC3000 2TB
Display(s) LG GQ950-B 4K 144hz 32"
Case Lian Li Lancool 216
Audio Device(s) Focusrite Scarlett 2i4 Gen2 \ SS Arctis Nova Pro \ DT 770 Pro
Power Supply MSI A1000G 1000W ATX 3.0
Mouse HyperX Pulsefire Haste 2
Keyboard NuPhy Filed75
Software Windows 11 Pro
Joined
Mar 27, 2007
Messages
2,753 (0.44/day)
Location
louisiana
Processor Intel Core i7-4790 Haswell Quad-Core 3.6GHz LGA 1150 84W
Motherboard GIGABYTE GA-H87-D3H LGA 1150 Intel H87 HDMI
Cooling CPU - Cooler Master Hyper T4 / Case - cooler master 120mm rear case fan (Air cooling)
Memory 32GB (4 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
Video Card(s) GTX1060 6GB
Storage Samsung 512 GB 840 PRO SSD Main Drive and Samsung 512 GB 840 EVO SSD Backup Drive
Display(s) ASUS 23" LED Monitor
Case COOLER MASTER Centurion 5 (silver & black)
Audio Device(s) (onboard audio) Realtek ALC892
Power Supply CORSAIR SU-750TX 750W ATX12V / EPS12V
Software Windows 10 Home Premium 64bit Edition
i wish to thank "Namslas90" for reminding me about the jumpers

thank you :toast:
 
Last edited:

Fuse-Wire

New Member
Joined
May 30, 2007
Messages
855 (0.14/day)
Location
Scotland, Far away from normality as possible
System Name The Box
Processor DualCore AMD Athlon 64 X2 2300MHz (11.5x200) 4400+
Motherboard AsRock N 68-S
Cooling Basic 90mm fans
Memory OCZ XTC Platinum 2GB DDR-2 800 SDRAM
Video Card(s) ATI Saphire x1650 Pro Series
Storage Maxtor 6L300R0 (300GB) Maxtors S (250GB)
Display(s) 19" LCD CTX
Case EYE-T
Audio Device(s) Realtek ALC650 @ Intel 82801DB ICH4 - AC'97 Audio Controller [B-0]
Power Supply 600W colors-IT super quiet
Software Microsoft 7 Ultimate
thanks, was useful, mind you i only use very small and fine brushes and nothing else, they seem to do the trick amongst heatsinks but i wouldnt use them for ANY chip on a MOBO due to the risk of a bristle getting lodged into the system and causing some trouble
 

Yin

Joined
Feb 19, 2006
Messages
540 (0.08/day)
Processor Intel i7 920
Motherboard ASUS RAMPAGE II Extreme
Cooling CM v10
Memory Corsair 3 x 2GB TR3X6G1866C9DF
Video Card(s) Nvidia XFX 8800GT Stock
Storage Seagate ST3500320AS, 2 x Samsung HD103UJ
Display(s) 2408WFP
Case Corsair 800D
Power Supply Corsair HX750W
I use alcohol swabs to clean the chips =/
 

Fuse-Wire

New Member
Joined
May 30, 2007
Messages
855 (0.14/day)
Location
Scotland, Far away from normality as possible
System Name The Box
Processor DualCore AMD Athlon 64 X2 2300MHz (11.5x200) 4400+
Motherboard AsRock N 68-S
Cooling Basic 90mm fans
Memory OCZ XTC Platinum 2GB DDR-2 800 SDRAM
Video Card(s) ATI Saphire x1650 Pro Series
Storage Maxtor 6L300R0 (300GB) Maxtors S (250GB)
Display(s) 19" LCD CTX
Case EYE-T
Audio Device(s) Realtek ALC650 @ Intel 82801DB ICH4 - AC'97 Audio Controller [B-0]
Power Supply 600W colors-IT super quiet
Software Microsoft 7 Ultimate
never tried that before
 
Joined
Apr 19, 2007
Messages
215 (0.03/day)
Location
Southern Arizona, USA
System Name Home/Work/Home
Processor Dual Xeon 5570 / Core i5-2.6Ghz / Dell Vostro 410 Xeon L5430
Motherboard Lenovo D20 / Dell 4110 / Vostro 410 G33 based
Cooling stock / stock / stock
Memory 12Gb / 4Gb / 4Gb
Video Card(s) 9800GT 512 / HD3000 / 9800GT 512 PCIE
Storage Geez Louise - a whole bunch !
Display(s) CRT Phillips Brilliance 204P
Case EATX / Laptop / Glorious Dell Vostro 410
Audio Device(s) stock / stock / stock
Power Supply stock / stock / stock
Mouse Zowie, is there another?
Keyboard Awesome Dell Natural (by Microsoft)
Software W2K3 Svr / W2K3 Svr
Benchmark Scores Alot / not so much / Working on it
Carburetor Cleaner and Brake Cleaner works great on memory modules

It may sound crazy, but I have successfully eliminated memory errors by cleaning DDR memory modules with carburetor cleaner or brake cleaner (those varieties that claim to leave no residue). These cleaners are typically available at any auto parts store.

Just a word of caution, please don't smoke or light one up while spraying off the modules, unless you or your DDR's like to catch fire! (kinda defeats the purpose of cleaning!)

Regards,
jtleon
 
D

Deleted member 24505

Guest
i use a long bristled brush and my hoover to do my psu.i dont want to open it :s

nice little guide tho'

the only thing that ever buuged me,was the arctic graphics card coolers clogging with dust.thats why i switched to a zalman vf900.
 
Joined
Sep 5, 2005
Messages
289 (0.04/day)
Location
vt
System Name Money Guilt / immortal X58
Processor 5600X / X5660
Motherboard MSI B550 GAMING PLUS / MSI-x58-PLAT
Cooling Cooler Master - Hyper 212 / Monsoon 3 Dual 120 fans
Memory OLOy WarHawk 2x8 / 2x4 gig Gskill 1600
Video Card(s) EVGA 3060 Ti FTW3 / R9 290 Powercolor PCS+
Storage Crucial P5 1TB / 128gig Samsung D830 2x1 Terabyte Seagates Raid0
Display(s) VIOTEK 32-In 2560x1440 Curved 144Hz / Acer 22in 1920x1080 120Hertz
Case NZXT - H510 Compact / Thermaltake V9 Black Edition
Audio Device(s) Soundblaster Audigy FX
Power Supply CORSAIR - RM Series 750W / Ocz 700 Modular
Mouse G403 / basic
Keyboard G15 / basic
Software Windows 10
Benchmark Scores http://www.3dmark.com/spy/18067733, http://www.3dmark.com/fs/24836348 http://www.3dmark.com/fs/11606
I take my whole pc outside set the air compressor to 100 psi and get it done!!!
 
Joined
Mar 27, 2007
Messages
2,753 (0.44/day)
Location
louisiana
Processor Intel Core i7-4790 Haswell Quad-Core 3.6GHz LGA 1150 84W
Motherboard GIGABYTE GA-H87-D3H LGA 1150 Intel H87 HDMI
Cooling CPU - Cooler Master Hyper T4 / Case - cooler master 120mm rear case fan (Air cooling)
Memory 32GB (4 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
Video Card(s) GTX1060 6GB
Storage Samsung 512 GB 840 PRO SSD Main Drive and Samsung 512 GB 840 EVO SSD Backup Drive
Display(s) ASUS 23" LED Monitor
Case COOLER MASTER Centurion 5 (silver & black)
Audio Device(s) (onboard audio) Realtek ALC892
Power Supply CORSAIR SU-750TX 750W ATX12V / EPS12V
Software Windows 10 Home Premium 64bit Edition
It may sound crazy, but I have successfully eliminated memory errors by cleaning DDR memory modules with carburetor cleaner or brake cleaner (those varieties that claim to leave no residue). These cleaners are typically available at any auto parts store.

Just a word of caution, please don't smoke or light one up while spraying off the modules, unless you or your DDR's like to catch fire! (kinda defeats the purpose of cleaning!)

Regards,
jtleon

be very carefull, Carburetor Cleaner and Brake Cleaner works great on removing paint and the coating on circuit boards too. anything like that can eat away the coating on the circuit boards so make sure you use electrical parts cleaner because it is safe not to dissolve the coating on boards.
 
Joined
Mar 27, 2007
Messages
2,753 (0.44/day)
Location
louisiana
Processor Intel Core i7-4790 Haswell Quad-Core 3.6GHz LGA 1150 84W
Motherboard GIGABYTE GA-H87-D3H LGA 1150 Intel H87 HDMI
Cooling CPU - Cooler Master Hyper T4 / Case - cooler master 120mm rear case fan (Air cooling)
Memory 32GB (4 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
Video Card(s) GTX1060 6GB
Storage Samsung 512 GB 840 PRO SSD Main Drive and Samsung 512 GB 840 EVO SSD Backup Drive
Display(s) ASUS 23" LED Monitor
Case COOLER MASTER Centurion 5 (silver & black)
Audio Device(s) (onboard audio) Realtek ALC892
Power Supply CORSAIR SU-750TX 750W ATX12V / EPS12V
Software Windows 10 Home Premium 64bit Edition
I take my whole pc outside set the air compressor to 100 psi and get it done!!!

i hope your joking, hate to see pc parts flying accross the road lol.

as long as you dont blow away any jumpers and dont get too close with the air stream to damage anything but you definately are taking chances doing that. :slap:
 

WarEagleAU

Bird of Prey
Joined
Jul 9, 2006
Messages
10,812 (1.67/day)
Location
Gurley, AL
System Name Pandemic 2020
Processor AMD Ryzen 5 "Gen 2" 2600X
Motherboard AsRock X470 Killer Promontory
Cooling CoolerMaster 240 RGB Master Cooler (Newegg Eggxpert)
Memory 32 GB Geil EVO Portenza DDR4 3200 MHz
Video Card(s) ASUS Radeon RX 580 DirectX 12 DUAL-RX580-O8G 8GB 256-Bit GDDR5 HDCP Ready CrossFireX Support Video C
Storage WD 250 M.2, Corsair P500 M.2, OCZ Trion 500, WD Black 1TB, Assorted others.
Display(s) ASUS MG24UQ Gaming Monitor - 23.6" 4K UHD (3840x2160) , IPS, Adaptive Sync, DisplayWidget
Case Fractal Define R6 C
Audio Device(s) Realtek 5.1 Onboard
Power Supply Corsair RMX 850 Platinum PSU (Newegg Eggxpert)
Mouse Razer Death Adder
Keyboard Corsair K95 Mechanical & Corsair K65 Wired, Wireless, Bluetooth)
Software Windows 10 Pro x64
Thank you very much for this little how to guide and your other guides. I really appreciate the work you have put in and if you dont mind, Im gonna sticky this on my own HDD. Thanks again its much appreciated.
 
Joined
Mar 27, 2007
Messages
2,753 (0.44/day)
Location
louisiana
Processor Intel Core i7-4790 Haswell Quad-Core 3.6GHz LGA 1150 84W
Motherboard GIGABYTE GA-H87-D3H LGA 1150 Intel H87 HDMI
Cooling CPU - Cooler Master Hyper T4 / Case - cooler master 120mm rear case fan (Air cooling)
Memory 32GB (4 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
Video Card(s) GTX1060 6GB
Storage Samsung 512 GB 840 PRO SSD Main Drive and Samsung 512 GB 840 EVO SSD Backup Drive
Display(s) ASUS 23" LED Monitor
Case COOLER MASTER Centurion 5 (silver & black)
Audio Device(s) (onboard audio) Realtek ALC892
Power Supply CORSAIR SU-750TX 750W ATX12V / EPS12V
Software Windows 10 Home Premium 64bit Edition
Thank you very much for this little how to guide and your other guides. I really appreciate the work you have put in and if you dont mind, Im gonna sticky this on my own HDD. Thanks again its much appreciated.

go right ahead, i never set out to tell anyone how to do anything but as i find i know a simple way to do something i just post it so everyone else can know it too.
 
Joined
Apr 2, 2007
Messages
2,817 (0.45/day)
Location
US
Processor Intel Q9400
Motherboard asus p5q-pro
Cooling Ultra120
Memory 6GB ddr2
Video Card(s) NVS 290
Storage 3TB + 1.5TB
Display(s) Samsung F2380
Case Silverstone Fortress FT02B
Audio Device(s) Creative X-Fi
Power Supply 750W PC P&C
Software win 7 ultimate 64bit
what I do, is take a paper towel, make it a little wet, then carefully wash the dust ot the components.
but you need to wait some time so it dries, only then turn it on... :D
 
Joined
Jul 18, 2007
Messages
2,693 (0.44/day)
System Name panda
Processor 6700k
Motherboard sabertooth s
Cooling raystorm block<black ice stealth 240 rad<ek dcc 18w 140 xres
Memory 32gb ripjaw v
Video Card(s) 290x gamer<ntzx g10<antec 920
Storage 950 pro 250gb boot 850 evo pr0n
Display(s) QX2710LED@110hz lg 27ud68p
Case 540 Air
Audio Device(s) nope
Power Supply 750w superflower
Mouse g502
Keyboard shine 3 with grey, black and red caps
Software win 10
Benchmark Scores http://hwbot.org/user/marsey99/
what you dont clean yours in the dish washer? thats were im going wrong then :nutkick:

sorry couldnt help it :D (if your not sure i mean ignore that first line)

if you remove the power cable from the back of the psu and hit your power button a few times it will drain any residual power from all the caps, i do this any time i take anything out of my system including dust as you can never be too careful.
 
Joined
Oct 2, 2005
Messages
3,059 (0.45/day)
Location
Baltimore MD
Processor Ryzen 5900X
Motherboard ASUS Prime X470 Pro
Cooling Arctic liquid freezer II 240
Memory 2 x 16 Gb Gskill Trident Z 3600 Mhz
Video Card(s) MSI Ventus 3060 Ti OC
Storage Samsung 960 EVO 500 Gb / 860 EVO 1 Tb
Display(s) Dell S2719DGF
Case Lian Li Lancool II Mesh
Audio Device(s) Soundblaster Z
Power Supply Corsair RM850x
Mouse Logitech G703
Keyboard Logitech G513
Software Win 11
as a side note OD quick drying contact cleaner works wonders on dusty fans.

sometimes you find that your fans are making a lil noise or running slower than normal just spray the coil area with contact cleaner and it will nock all the dust and grime that builds up in there
 

panchoman

Sold my stars!
Joined
Jul 16, 2007
Messages
9,595 (1.57/day)
Processor Amd Athlon X2 4600+ Windsor(90nm) EE(65W) @2.9-3.0 @1.45
Motherboard Biostar Tforce [Nvidia] 550
Cooling Thermaltake Blue Orb-- bunch of other fans here and there....
Memory 2 gigs (2x1gb) of patriot ddr2 800 @ 4-4-4-12-2t
Video Card(s) Sapphire X1950pro Pci-E x16 @stock@stock on stock
Storage Seagate 7200.11 250gb Drive, WD raptors (30/40) in Raid 0
Display(s) ANCIENT 15" sony lcd, bought it when it was like 500 bucks
Case Apevia X-plorer blue/black
Audio Device(s) Onboard- Why get an sound card when you can hum??
Power Supply Antec NeoHe 550-manufactured by seasonic -replacement to the discontinued smart power series
Software Windows XP pro SP2 -- vista is still crap
Another excellent guide by Keakar! thanks man!
 
Joined
Nov 22, 2007
Messages
71 (0.01/day)
System Name Crap
Processor Ryzen 5 5600x
Motherboard Asus TUF Gaming B550-Plus WIFI II
Cooling Noctua NH-U125
Memory G.SKILL Ripjaws V Series 16GB (2 x 8GB)
Video Card(s) MSI RTX 30800 12gb OC
Storage SAMSUNG 970 EVO 500GB SAMSUNG 970 EVO Plus 1TB
Display(s) Asus TUF Gaming VG27B 1440
Case Test Bench
Audio Device(s) Nvidia High Defination Audio
Power Supply Corsair RM750X Modular
Mouse Logitech G602 Wireless
Keyboard Redragon K552-RGB Mechanical Gaming Keyboard
Software Windows 10 64-Bit Pro
Benchmark Scores Cinebench R20.060 - 10777
HOW TO CLEAN THE DUST FROM YOUR PC
dust mask / rubber gloves

Which would make me ask "Just how often do you clean the dust from your computer"?
:eek:
 
Joined
Dec 15, 2006
Messages
1,703 (0.27/day)
Location
Oshkosh, WI
System Name ChoreBoy
Processor 8700k Delided
Motherboard Gigabyte Z390 Master
Cooling 420mm Custom Loop
Memory CMK16GX4M2B3000C15 2x8GB @ 3000Mhz
Video Card(s) EVGA 1080 SC
Storage 1TB SX8200, 250GB 850 EVO, 250GB Barracuda
Display(s) Pixio PX329 and Dell E228WFP
Case Fractal R6
Audio Device(s) On-Board
Power Supply 1000w Corsair
Software Win 10 Pro
Benchmark Scores A million on everything....
I've got a cat, and I smoke.... What I need is one of them alcohol bathes so i can just take my mobo out and dunk it in there.
 

3991vhtes

New Member
Joined
Apr 22, 2007
Messages
2,785 (0.45/day)
Location
My house.
Processor AMD Athlon 64 3800+ Venice 2.4GHz
Motherboard ASUS A8V-VM SE
Cooling Stock
Memory 1GB DDR400
Video Card(s) DiamondViper Radeon X1650PRO 512MB PCI-e
Storage Seagate 250GB SATA
Display(s) Acer AL2002W 20" LCD Widescreen
Case cheap
Audio Device(s) Creative SoundBlaster
Power Supply 500 watt
Software Vista Ultimate
Benchmark Scores 4.1 Vista index
Moving dust can create static electricity, and we all know what static does. ZAP goes a component.

I usually just dust my heatsink and fan, not the case fans, graphics card fan, mobo, RAM, etc.
 
Joined
Aug 22, 2007
Messages
3,450 (0.57/day)
Location
CA, US
System Name :)
Processor Intel 13700k
Motherboard Gigabyte z790 UD AC
Cooling Noctua NH-D15
Memory 64GB GSKILL DDR5
Video Card(s) Gigabyte RTX 4090 Gaming OC
Storage 960GB Optane 905P U.2 SSD + 4TB PCIe4 U.2 SSD
Display(s) Alienware AW3423DW 175Hz QD-OLED + Nixeus 27" IPS 1440p 144Hz
Case Fractal Design Torrent
Audio Device(s) MOTU M4 - JBL 305P MKII w/2x JL Audio 10 Sealed --- X-Fi Titanium HD - Presonus Eris E5 - JBL 4412
Power Supply Silverstone 1000W
Mouse Roccat Kain 122 AIMO
Keyboard KBD67 Lite / Mammoth75
VR HMD Reverb G2 V2
Software Win 11 Pro
i take my pc apart clean it and put back together again
 

TheShadowFL

New Member
Joined
Apr 10, 2007
Messages
39 (0.01/day)
Location
Central FL, USA
I just took in on trade, a computer I built for one of my customers in 2000.
The Thermaltake CPU cooler was wailing!
I removed the entire assembly from the PC....removed the fan from the cooler and carefully cleaned each blade with a damp cloth till the entire fan was nice and clean. Then I cleaned the heat sink fins with a toothbrush.
The noise was coming from a very dry bearing in the fan.

I use a hypodermic needle, filled with a very fine machine oil to re-lubricate my fans.
I stick the end of the needle right through the seal on the back of the fan, that covers the bearing, and inject a small amount of oil right into the bearing cavity.
Then I spin the fan by hand to work the oil into the bearing.

This 7 year old Thermaltake cpu cooler is now running just like it did when new, seven years ago.

Now for the ram. Yup, ram gets dirty too, sitting so close to the CPU. Dirt getting down into the tiny gaps between the legs on the ram chips can cause them to short out and fail.
I've saved hundreds of so-called bad ram sticks by just removing them from the computer and thoroughly cleaning them. That can range from brushing them off with a dry tooth brush and cleaning the edge connector with a dry scouring pad, to scrubbing them with soap and water at the kitchen sink. If you use water, which doesn't bother them at all, by the way, you must rinse them thoroughly with denatured alcohol to remove all the water then allow them to air dry,,,,,over night if possible.

In one case when I was in a big hurry, I scrubbed the ram totally with alcohol and dried it with a hair dryer. It worked perfectly when reinstalled in the PC. Total time for the cleaning, less than 15 minutes.

I never throw out a bad ram stick before I've tried to save it with a good washing. I've saved over 90% of the bad ram I've seen in the last 27 years, by just cleaning it.

Whenever cleaning cpu or PSU fans with compressed air, use a small stick or screwdriver to prevent the fan from turning while it's being blasted clean. If the compressed air is allowed to spin the fan, the blades can fly off or the bearings can be over-reved and cause premature failure. I've seen both happen and it ain't pretty.

Also, be very careful when using a vacc. cleaner inside of a PC.
The inrush of air at the tip of the cleaner tool can cause very high static charges to develop, in the thousands of volts. Never vacc. a mobo or IC chips.
Reserve the vacc cleaner for the case and parts that cannot be destroyed by static electricity.

Happy Computing and Merry Christmas everyone!

The Shadow :cool:
 

splitter

New Member
Joined
Dec 15, 2007
Messages
4 (0.00/day)
Very fine tips mate.
What I use as of now are fine brushes and a blower sometimes. and nothing more... I do regularly clean my case a I have faced some over heating problems and that was due to non cleaning of case for months.
 
Top