How To: Enable SLI on pre-i7/i5 hardware

anatolymik · Oct 3, 2010

anatolymik said:
try 0.8 and 0.7 patches

are you sure your cards are ok?

MadBoy89 · Oct 3, 2010

anatolymik said:
try 0.8 and 0.7 patches

I will , but tomorow. I am tired of rebooting ,
Thx 4 help.

I will post results tomorow.

yes, i am sure.

But i will also test them one by one.

Edit: I am reinstaling Windows now, so i will try on clean setup.

Triton.se · Oct 4, 2010

MadBoy89, your PSU Corsair TX650 only has 2x PCI-e power cords, how did you connect the other card? Have you used four individual molex to connect to two 6 pin adapters for other card ?

Tested with CPU at 3GHz only ?

Have you tested Memtest86+ ?

Mussels · Oct 4, 2010

Triton.se said:
MadBoy89, your PSU Corsair TX650 only has 2x PCI-e power cords, how did you connect the other card? Have you used four individual molex to connect to two 6 pin adapters for other card ?

Tested with CPU at 3GHz only ?

Have you tested Memtest86+ ?

the TX650 is a single rail PSU, so it doesnt matter how he connects the cards, so long as he does connect them.

the other stuff (OC testing/memtest) sounds like a good start.

Triton.se · Oct 4, 2010

it's possible to connect one molex to such 6 pin adapter and two molex for the other, so 3 molex for both 6 pins...I've tested and it works, but not for HOURS I think. Just wanna know if his cards are powered enough.

EDIT /// What I tested was ONE molex + ONE 6pin PCIe cable. Never tested 3 molex for one card. Best he could do is connecting one 6 pin cord for EACH card and fill with adapters.

r3b00t3r · Oct 4, 2010

Triton.se said:
it's possible to connect one molex to such 6 pin adapter and two molex for the other, so 3 molex for both 6 pins...I've tested and it works, but not for HOURS I think. Just wanna know if his cards are powered enough.

EDIT /// What I tested was ONE molex + ONE 6pin PCIe cable. Never tested 3 molex for one card. Best he could do is connecting one 6 pin cord for EACH card and fill with adapters.

Once I used my HX620 in that way: 1 PCIE in each card, 2 molex -> 1 PCIE in the first card, 1 molex -> 1 PCIE in the second card. Never had any problem whatsoever. Now I'm with 2 Y-shaped cables that I ordered from Corsair - all cards are now with PCIE.

MadBoy89 · Oct 4, 2010

Triton.se said:
MadBoy89, your PSU Corsair TX650 only has 2x PCI-e power cords, how did you connect the other card? Have you used four individual molex to connect to two 6 pin adapters for other card ?
Tested with CPU at 3GHz only ?

Have you tested Memtest86+ ?

Jes i have used four molex to 2 6 pin adapters

But that corsair is powerfull enogh to run 2x GTX 295

BTW,
With 0.9 SLI patch + original driver ( 258.96 ) do i have to apply Forceware patch 1.1 or it is not needed anymore with new Sli patch ?

r3b00t3r · Oct 4, 2010

MadBoy89 said:
With 0.9 SLI patch + original driver ( 258.96 ) do i have to apply Forceware patch 1.1 or it is not needed anymore with new Sli patch ?

No need of patch 1.1. At least, I'm not using it and I have no stability issues and SLI is enabled and working.

MadBoy89 · Oct 4, 2010

anatolymik said:
are you sure your cards are ok?

U have any more idea, with what to test cards, i have used 3dmark06 and Furmark.

ZOTAC is ok for now,
XFX is next to test.

And new Windows are installed,
Windows 7 x64 Ultimate,.

anatolymik · Oct 4, 2010

MadBoy89 said:
U have any more idea, with what to test cards, i have used 3dmark06 and Furmark.

ZOTAC is ok for now,
XFX is next to test.

And new Windows are installed,
Windows 7 x64 Ultimate,.

try with new installed windows

MadBoy89 · Oct 4, 2010

anatolymik said:
try with new installed windows

I will, but i will first test booth cards....

Any other suggestion to test GPU ?

and then i will use 0.9 SLI patch + 258.96

EDIT: Downloading unigine heaven benchmark

anatolymik · Oct 4, 2010

MadBoy89 said:
Any other suggestion to test GPU ?

i have no for now

MadBoy89 · Oct 4, 2010

anatolymik said:
i have no for now

XFX on testing,

Then if it turns ok, i will insert ZOTAC in and try SLI patch.

anatolymik · Oct 4, 2010

MadBoy89 said:
XFX on testing,
Then if it turns ok, i will insert ZOTAC in and try SLI patch.

i think your cards are ok. i think i'll patch driver for you

anatolymik · Oct 4, 2010

MadBoy when you done tell me. if cards will be ok i'll patch driver to you to be able use sli without patch to see what will happen

MadBoy89 · Oct 4, 2010

anatolymik said:
MadBoy when you done tell me. if cards will be ok i'll patch driver to you to be able use sli without patch to see what will happen

I have inserted second card,
Install patch 0.9b and 258.96.

For now it is working, but we will se, how long. :toast:

Thx, 4 your offer

anatolymik · Oct 4, 2010

thx you for help me make the patch better

Velvet Wafer · Oct 4, 2010

Thanks for doing it anatolymik!

Beside of all these major problems, i seem to have a minor bug since one of the last new patches...
I used 258.96,on Win7 x64, with 2x 8800gt on a 790GX Board, and it worked without major flaws since then (your recent patches made some games even smoother tho... NFSS for example, or Dirt 2

)
But now, after a few days of unproblematic use of the new patch, i noticed both memory temperature sensors of both my 8800gt seem to have vanished from the system :twitch:

they dont appear in Everest, nor GPU-Z... PCB Temperatures and GPU Temperatures are existant, like normal.
Can this be a bug of the patch, or is the error to be searched in my hardware?
I would be glad of any advice!

anatolymik · Oct 4, 2010

it's not the patch problem for sure.
but you can do something. disable sli and reboot. but boot your pc on non-sli option. and see what happens. gpu-z doesnt shows it for me too. but everest shows

tdbone1 · Oct 4, 2010

i had problems with your 0.8b on my system before (i think i updated my system specs so check it out) i had to use the 0.7 one. (im talking like 6months ago).

the other day i tried the newer B3 with the 260.63 and system wouldnt work
got blue screens when playing game or even just surfing or doing nothing after about 2-4mins like some of the other ppl

i was thinking about trying the 0.9 with the 260.63 in a bit but i think the 0.8b and the b3 and i bet the 0.9 dont work because what your doing to the bootloader.

is it possible 0.7 might work with 260.63 as it used to work for i think it was 258.49 (was the highest i could go at least) with a modded .inf

anyhow i think some people might be having problems with the 0.8 and 0.9 because they might be running a pirated version of windows where they slic mod the bootloader already.

could your 0.8 and 0.9 be modding the already modded bootloader and messing something up?

do you know what i mean?

and no one in here accuse me of a pirate im just sayn :banghead:

ok so mainly what im asking is
what does 0.7 do different then 0.8 and 0.9?
explain what is does to bootloader please

anatolymik · Oct 5, 2010

tdbone1 said:
explain what is does to bootloader please

loader the same on all versions. and loader cracked to load unsigned system files to dont use testsigning mode. that's all. and this have nothing to do with slic

anatolymik · Oct 5, 2010

tdbone1 said:
what does 0.7 do different then 0.8 and 0.9?

nothing. i'm fooling all of you. because i have nothing to do.

johnspack · Oct 5, 2010

Fresh install of XP64 with 258.96 drivers. Going to install slipatch .09, and start running games. Should have reports soon.

johnspack · Oct 5, 2010

Okay, not for XP64. My cards are too weak for Win7, so I'm out. Good luck guys!

tdbone1 · Oct 5, 2010

anatolymik said:
nothing. i'm fooling all of you. because i have nothing to do.

maybe you can explain why 0.7 works for me and 0.8 did not.

Processor	Q9650 @ 4.0
Motherboard	Asus P5E
Cooling	TRU 120 Ex
Memory	G. Skill black edition @ 880
Video Card(s)	2x GTX 260 ( XFX + Zotac )
Storage	F1 + Barracuda = 1.x Tb
Display(s)	Samy 2232BW
Case	CM 690
Audio Device(s)	X-fi audio
Power Supply	TX 650
Software	Win 7 x64

System Name	ASUS ROG Strix G17 G713QR-HG022T
Processor	AMD Ryzen 9 5900HX
Motherboard	G713QR
Cooling	Liquid Metal
Memory	G.Skill Ripjaws 2x16GB 3200MHz CL22 1.2v (F4-3200C22D-32GRS)
Video Card(s)	NVIDIA RTX 3070 130W
Storage	HFM001TD3JX013N 1TB
Display(s)	17.3" FHD 300MHz 3ms 100% sRGB (+External 1080p 144Hz)
Power Supply	240W power-brick
Mouse	Deltaco DM210
Software	Windows 10
Benchmark Scores	CINEBENCH R20: CPU 5442, Single Core 589 - Unigine Superposition Extreme: 7103, Medium: 20821

System Name	Rainbow Sparkles (Power efficient, <350W gaming load)
Processor	Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard	Asus x570-F (BIOS Modded)
Cooling	Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory	2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s)	Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage	2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s)	Phillips 32 32M1N5800A (4k144), LG 32" (4K60) \| Gigabyte G32QC (2k165) \| Phillips 328m6fjrmb (2K144)
Case	Fractal Design R6
Audio Device(s)	Logitech G560 \| Corsair Void pro RGB \|Blue Yeti mic
Power Supply	Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse	Logitech G Pro wireless + Steelseries Prisma XL
Keyboard	Razer Huntsman TE ( Sexy white keycaps)
VR HMD	Oculus Rift S + Quest 2
Software	Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores	Nyooom.

System Name	ASUS ROG Strix G17 G713QR-HG022T
Processor	AMD Ryzen 9 5900HX
Motherboard	G713QR
Cooling	Liquid Metal
Memory	G.Skill Ripjaws 2x16GB 3200MHz CL22 1.2v (F4-3200C22D-32GRS)
Video Card(s)	NVIDIA RTX 3070 130W
Storage	HFM001TD3JX013N 1TB
Display(s)	17.3" FHD 300MHz 3ms 100% sRGB (+External 1080p 144Hz)
Power Supply	240W power-brick
Mouse	Deltaco DM210
Software	Windows 10
Benchmark Scores	CINEBENCH R20: CPU 5442, Single Core 589 - Unigine Superposition Extreme: 7103, Medium: 20821

Processor	Intel Q9550 E0 @ 3825MHz
Motherboard	Asus P5Q Deluxe
Cooling	Thermalright Ultra Extreme 120 Black + 10 X Noctua P12
Memory	2X2GB GSkill Ripjaws 1200MHz 1.9V @ 5-5-5-15
Video Card(s)	2 X EVGA GTX260 Core 216 55 nm SuperClocked @ SLI
Storage	1 X SSD GSKILL FALCON I 128GB + 1 X Samsung F3 2TB + 2 X Samsung F3 1TB @ RAID1
Display(s)	Samsung 223BW
Case	modded Lian Li A77
Audio Device(s)	Creative X-Fi Xtreme Music
Power Supply	Corsair HX620
Software	Windows 7 Ultimate x64
Benchmark Scores	about P22000 in 3DMark Vantage

How To: Enable SLI on pre-i7/i5 hardware

anatolymik

MadBoy89

New Member

Triton.se

Mussels

Freshwater Moderator

Triton.se

r3b00t3r

New Member

MadBoy89

New Member

r3b00t3r

New Member

MadBoy89

New Member

anatolymik

MadBoy89

New Member

anatolymik

MadBoy89

New Member

anatolymik

anatolymik

MadBoy89

New Member

anatolymik

Velvet Wafer

anatolymik

tdbone1

anatolymik

anatolymik

johnspack

Here For Good!

johnspack

Here For Good!

tdbone1

System Name	Nexus PC
Processor	Intel Xeon E3-1231 v3, 3600 MHz
Motherboard	Gigabyte GA-H97-HD3
Cooling	Thermalright Macho V2
Memory	24GB DDR3, 1400MHZ CL8
Video Card(s)	Sapphire Radeon R9 290
Storage	Samsung EVO 960 250gb, EVO 850 250gb, Vertex 3 128gb. 2 TB of Rotational.
Display(s)	1xAsus MX299, 2x Asus MX239, Oculus Rift CV1
Case	Sunflower Tower
Audio Device(s)	C-Media CMI8738/C3DX
Power Supply	Corsair TX850
Mouse	Cyborg R.A.T. 7
Software	Win7 64Bit Ultimate

System Name	Medium
Processor	AMD Phenom II x6 1090T @ 3.6GHz
Motherboard	MSI 890GXM-G65
Cooling	stock cooler
Memory	G.SKILL Ripjaws Series 4GB DDR3 1600
Video Card(s)	2 * 5870 in crossfire
Storage	1 40GB intel SSD and 1 750GB WD
Display(s)	Samsung SyncMaster 226BW
Case	NZXT Vulcan
Audio Device(s)	Logitech Clear Chat Pro USB Headphones
Power Supply	Thermaltake 680 pure power with 15A, 14A and 23A 12v rails
Software	Windows 7 Premium x64

System Name	System2 Blacknet , System1 Blacknet2
Processor	System2 Threadripper 1920x, System1 2699 v3
Motherboard	System2 Asrock Fatality x399 Professional Gaming, System1 Asus X99-A
Cooling	System2 Noctua NH-U14 TR4-SP3 Dual 140mm fans, System1 AIO
Memory	System2 64GBS DDR4 3000, System1 32gbs DDR4 2400
Video Card(s)	System2 GTX 980Ti System1 GTX 970
Storage	System2 4x SSDs + NVme= 2.250TB 2xStorage Drives=8TB System1 3x SSDs=2TB
Display(s)	2x 24" 1080 displays
Case	System2 Some Nzxt case with soundproofing...
Audio Device(s)	Asus Xonar U7 MKII
Power Supply	System2 EVGA 750 Watt, System1 XFX XTR 750 Watt
Mouse	Logitech G900 Chaos Spectrum
Keyboard	Ducky
Software	Manjaro, Windows 10, Kubuntu 23.10
Benchmark Scores	It's linux baby!