Hello I used this setup since February and it's stable.I just wanted to see if I did something wrong regarding the powerplan or throttlestop/afterburner settings.
Would greatly appreciate it if you could take a look.The default turbo ratio limits can't go past 4.8ghz and cause thermal throttling. Going past 3.8-3.9ghz on all cores causes pl1 to go red and revert from the 55w usage to the rated limit of 45w.The other cores can go 100-200mhz higher than the 6 cores without thermal or power throttling which helps in 4core or less optimized games.
Setting epp higher than 0 causes the system to freeze probably because of the selected power plan.Scores are mediocre but increasing turbo ratio limits increases temp with 3 degrees for every 100mhz and it almost immediately power throttles back to 45w so the boost is kind of irrelevant.
Tried increasing iccmax to 255 on both cache and core but did not get any results regarding EDP OTHER plus putting power limit 4 on 0 so I reverted back to stock settings.Unfortunately I was not able to provide a log even though I checked the box no logs folder was created inside throttlestop please advise.
Thank you for your time.I attach a couple of prtscreens maybe it helps
EDIT managed to find the logs location under users/admin folder. Don't know what I'm looking at though...
Would greatly appreciate it if you could take a look.The default turbo ratio limits can't go past 4.8ghz and cause thermal throttling. Going past 3.8-3.9ghz on all cores causes pl1 to go red and revert from the 55w usage to the rated limit of 45w.The other cores can go 100-200mhz higher than the 6 cores without thermal or power throttling which helps in 4core or less optimized games.
Setting epp higher than 0 causes the system to freeze probably because of the selected power plan.Scores are mediocre but increasing turbo ratio limits increases temp with 3 degrees for every 100mhz and it almost immediately power throttles back to 45w so the boost is kind of irrelevant.
Tried increasing iccmax to 255 on both cache and core but did not get any results regarding EDP OTHER plus putting power limit 4 on 0 so I reverted back to stock settings.Unfortunately I was not able to provide a log even though I checked the box no logs folder was created inside throttlestop please advise.
Thank you for your time.I attach a couple of prtscreens maybe it helps
EDIT managed to find the logs location under users/admin folder. Don't know what I'm looking at though...
Attachments
Last edited: