HyperX Fury RGB 32GB DDR4 3200MHz

[VuurVOS]

At this moment we dont know which memory die's are used. If it is not Samsung then some memory timings like tRC could be too tight configured.

 

[iuliug]

@VuurVOS They are 4.32. Got proof

 

[Detonate12]

VuurVOS after a few days of testing in games the stability of my pc is not ok. During games, my PC crashes or restarts. If I don't play, everything is ok, the pc works flawlessly.
I wrote to Kingston and here's what they said to me: "According to the QVL you should be able to run the modules at 3000MHz in XMP profile 2.
We suggest the following: Reset the BIOS to default and then test the modules individually or in pairs with XMP profile 1, XMP profile 2 or try to set the advertised settings manually.
Please find more information on the link below:
https://www.kingston.com/dataSheets/HX432C16FB3AK2_32.pdf

 

[VuurVOS]

VuurVOS after a few days of testing in games the stability of my pc is not ok. During games, my PC crashes or restarts. If I don't play, everything is ok, the pc works flawlessly.
I wrote to Kingston and here's what they said to me: "According to the QVL you should be able to run the modules at 3000MHz in XMP profile 2.
We suggest the following: Reset the BIOS to default and then test the modules individually or in pairs with XMP profile 1, XMP profile 2 or try to set the advertised settings manually.
Please find more information on the link below:
https://www.kingston.com/dataSheets/HX432C16FB3AK2_32.pdf

How is your airflow in the case?? Does the memory get cooling? Does it only happen when the temperatures are high in the case?


@iuliug Nice Samsung. Those timings should be working. Did you try to adjust the CAD BUS values to see if the situation improves?

 

[Detonate12]

I don't really like the temperature in games. I have a case with 7 fans, a liquid cooler processor and I don't know why it reaches up to 70-75 degrees in games.
I installed MSI Afterburner, I don't know, something is wrong somewhere.

 

[iuliug]

@VuurVOS Are they really good dies? People say they are C-dies and very mediocre. May i ask kindly ask you smth? Can you pls reply with all the settings i have to manually alter ? I worry if i comb this thread i might miss smth. Thanks i nadvance.

 

[Knoxx29]

@Detonate12

I don't want to say something stupid but there was a time where AMD builds would work better with B-die Ram, i don't know if that has changed or it's still the same, btw,
i used the B-Die finder to check if your Ram is B-die but couldn't find anything,

 

[VuurVOS]

@VuurVOS Are they really good dies? People say they are C-dies and very mediocre. May i ask kindly ask you smth? Can you pls reply with all the settings i have to manually alter ? I worry if i comb this thread i might miss smth. Thanks i nadvance.

I dont have any experiance with Samsuing C-dies but mediocre B-dies should be able to do 3200MHz CL16 at 1.35v

Can you try the following CAD Bus configs and see which one are more stable?
24-20-20-24
30-20-20-24
40-20-20-24

I don't really like the temperature in games. I have a case with 7 fans, a liquid cooler processor and I don't know why it reaches up to 70-75 degrees in games.
I installed MSI Afterburner, I don't know, something is wrong somewhere.

Can you make a picture of your case?

 

[Detonate12]

Carcasa nJoy Arlow RGB - PC Garage

Carcasa nJoy Arlow RGB

www.pcgarage.ro

 

[VuurVOS]

Carcasa nJoy Arlow RGB - PC Garage

Carcasa nJoy Arlow RGB

www.pcgarage.ro

Can you provide the picture of your case. Picture of the manufacture doesnt tell how the AIO is installed or airflow is blocked.

 

[iuliug]

I dont have any experiance with Samsuing C-dies but mediocre B-dies should be able to do 3200MHz CL16 at 1.35v

Can you try the following CAD Bus configs and see which one are more stable?
24-20-20-24
30-20-20-24
40-20-20-24

If I apply the XMP profile and only change those values it will not boot without changing other values.

 

[VuurVOS]

If I apply the XMP profile and only change those values it will not boot without changing other values.

What do you mean without changing othe values? I hope you still are using the ProcODT, RttNom, RttWr and RttPark values which was provided earlier?

 

[iuliug]

Ok. I will search the thread then. I reseted the bios b4 i put my safe values i am currently using.

 

[Detonate12]

Reset the BIOS to default and then activate XMP profile 1 (2933 MHz) and work perfect in games (1 hour).

 

[iuliug]

I dont have any experiance with Samsuing C-dies but mediocre B-dies should be able to do 3200MHz CL16 at 1.35v

Can you try the following CAD Bus configs and see which one are more stable?
24-20-20-24
30-20-20-24
40-20-20-24

@VuurVOS @VuurVOS Which are the CAD Bus in the Bios?

 

[VuurVOS]

Which are the CAD Bus in the Bios?

CLKDrvStr, AddrCmdDrvStr, CsOdtDrvStr, CKEDrvStr

 

[iuliug]

they all seems to have the same 24 value on auto.

 

[VuurVOS]

Any luck to gain more stability with adjusting the CAD Bus?

 

[iuliug]

I did not try. It is not really clear which values goes to which settings. I will let my PC be for the holidays + there will be some Bios updates soon. Also i am trying to sell the RAM at a loss.
If not after AMD will get the BAR bios update i will try one more time.

 

[VuurVOS]

If not after AMD will get the BAR bios update i will try one more time.

After the bios update you still need a Ryzen 5000 and a RX6000 graphics card to get it working

CLKDrvStr = 24 (if it doesnt work properly, try a higher value like 30 or 40)
AddrCmdDrvStr = 20
CsOdtDrvStr = 20
CKEDrvStr = 24