@VuurVOS I had an issue with a 2 tb drive that i shucked out of its enclosure and then it's content was not recognized when attached via SATA. So i had to re-inserted in the enclosure andcoppied 1.7 TB of data to another drive and re-inserted it into the pc.
Sorry but while i did that i did not want to fiddle with the ram.
I will loose those setting today and let you know. I very much apreciate your input and your dedication. thank you.
I also want to do some more research on ProcOCDT and those Rttt settings.
@VuurVOS So ... I tried these settings and i got BSOD at windows start. I got into the Bios and changed The dram termination voltage to half - 0.66 ish of normal Dram voltage 1.35 (apparently it is an AMD recomendation) and i managed to boot into Win. But MemTest64 littered with 8-9 errors in the first seconds.
A note: Default XMP profile puts tRRDL at 9 . Should i keep it that way or put 8 as you suggested?
Can you pls go through all the settings see if i got all of them as you suggested? Are Rttt the right ones?