i want to help me to overclock my 4770k and asus z87 deluxe .

[FireFox]

if you can run it for an hour that's great.

Hoping temps wont be a problem

 

[newtonman]

and later to do for cpu?? alone??

 

[cucker tarlson]

People get too freaked out about stress testing. Just make it boot to windows, after that it's easy Had a bsod or freeze ? Just nudge the voltage by 0.010 up,rinse,repeat.

and later to do for cpu?? alone??

nah don't waste you precious time for the cpu tests alone, it'll probably pass on a half stable cpu too, it's just a light load. pass 1 hr of fpu and then just do stuff.

 

[newtonman]

i did i have overheating

 

[cucker tarlson]

i did i have overheating

what are you cooling that 4770k with ?

 

[FireFox]

i did i have overheating

I knew it was going to happen

 

[newtonman]

cooler master nepton 240

and for voltage i put 1230./

 

[Deleted member 178884]

I agree - let time tell, run 10-11 cinebench multithread runs one after the other and if the score is somewhat consistent go and play some games - make sure to save frequently though.

 

[cucker tarlson]

cooler master nepton 240

what were your temps ? is the thermal paste fairly fresh ? mounted firmly ?

with haswell and fpu test you're probably limited by the pigeon poop under the IHS, not the cooler.

if you keep getting too high temps in aida fpu, try something else. IBT is very demanding but still not as hot as fpu.

 

[newtonman]

now??

 

[FireFox]

if you keep getting too high temps in aida fpu, try something else. IBT is very demanding but still not as hot as fpu.

I am on Watercooling and running FPU the temps will be around 80c

 

[cucker tarlson]

I am on Watercooling and running FPU the temps will be around 80c

custom loop is another story. plus haswell is known to heat up like a mother****** in stress tests.

 

[FireFox]

custom loop is another story. plus haswell is known to heat up like a mother****** in stress tests.

What i was trying to say is that even with a Custom loop temps tend to get high when running FPU

 

[cucker tarlson]

What i was trying to say is that even with a Custom loop temps tend to get high

yup, either delid, get a soldered one, or get used to paying your cpu reparations for what you made it suffer through

 

[newtonman]

?

 

[FireFox]

?

?

Trying to guess what you mean.

 

[cucker tarlson]

4.3GHz at 1.21v is fairly good for 4770k, they weren't good clockers. You still have lots of headroom if you can get 4.3 stable at 1.21v, just don't use fpu stress test if you can't cool the cpu down. Like others suggested,do some heavy real world tasks like video encoding.

psssst, da vinci is fantastic video software, and it's free

 

[dorsetknob]

?

Low quality post

 

[FireFox]

Low quality post

It doesn't even say that

 

[newtonman]

i will do some tests and i will show you

with da vinci what kind of test will do??



Synthetic Everything Benchmarks Davinci Resolve this program you mean?

i dont understand something i want to help me
i overclocked my 4770k in 4.5 with 1250 manual voltage and i run the intelburn test#
and i have the results

https://snag.gy/yYAIgH.jpg

so if i passed this test what it means??

but i dont understand with aida64 when i did the test with stress fpu i had overheating

from these 2 which is the best aida64 or intelburn ??

 

[newtonman]

i did and the realbench stress test and it passed me without problems

so if i passed these 2 my overclockling is stable??

 

[BarbaricSoul]

That means it has passed initial stability tests. Next is to use it. Play some games. Run some programs (make backups of your work frequently). Use it as you plan to use it. That is the real test. If you get no crashes using it, and your temperatures stay under 80'c, yes, it is stable.

 

[newtonman]

but why when i used aida when i did the test with stress fpu i had overheating ??

and with these 2 programs realbench stress and intelburn test i didnt have problems>??>
can you tell me please??

 

[BarbaricSoul]

different programs stress the cpu differently

what temperature are you calling overheating?

 

[newtonman]

in core temp when i use it with intelburn test

i have these temperatures when it stress

also this temperatures in real gaming can exist??

https://snag.gy/5v64Ld.jpg