• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

i5 Delid not what I was expecting

Joined
Oct 21, 2005
Messages
6,874 (1.02/day)
Location
USA
System Name Computer of Theseus
Processor Intel i9-12900KS: 50x Pcore multi @ 1.18Vcore (target 1.275V -100mv offset)
Motherboard EVGA Z690 Classified
Cooling Noctua NH-D15S, 2xThermalRight TY-143, 4xNoctua NF-A12x25,3xNF-A12x15, 2xAquacomputer Splitty9Active
Memory G-Skill Trident Z5 (32GB) DDR5-6000 C36 F5-6000J3636F16GX2-TZ5RK
Video Card(s) EVGA Geforce 3060 XC Black Gaming 12GB
Storage 1x Samsung 970 Pro 512GB NVMe (OS), 2x Samsung 970 Evo Plus 2TB (data 1 and 2), ASUS BW-16D1HT
Display(s) Dell S3220DGF 32" 2560x1440 165Hz Primary, Dell P2017H 19.5" 1600x900 Secondary, Ergotron LX arms.
Case Lian Li O11 Air Mini
Audio Device(s) Audiotechnica ATR2100X-USB, El Gato Wave XLR Mic Preamp, ATH M50X Headphones, Behringer 302USB Mixer
Power Supply Super Flower Leadex Platinum SE 1000W 80+ Platinum White
Mouse Zowie EC3-C
Keyboard Vortex Multix 87 Winter TKL (Gateron G Pro Yellow)
Software Win 10 LTSC 21H2
I think my chip may be running hotter after delidding it now. I have applied paste about 20x in varying amounts and styles. I got a reduction of at best -5*C with CLP, for the application method that time I put a ton of it down covering the die and the backside of the lid. Unfortunately, I moved the case and it seemed like I lost that reduction amount (maybe the CLP slid out). I ran out of CLP and I am using AS5 (which I applied similarly) with loads around 70*C in Intel Extreme Utility/P95, idle around 30*C, 1.15v@4.0ghz. This chip sucks so I actually need that much voltage to be stable. It sucked before delid and it sucks even worse after. Previously before delid was around 60-65*C load, 25-30*C idle. Ambient in my apartment has been around 22*C. Also my chip had not very much intel factory thermal paste under it when I delidded it initially, unlike pictures I have seen. The contact with the die is good, I have removed most of the black glue material on the pcb and I polish/sanded the contact part of the lid (where it would rest on the pcb) with 2500 grit to remove any glue on it that might result in less contact with the die.

I ordered some CLU since I heard its easier to work with then the CLP.

Any ideas?

Edit: Also the lid seems to be flat. I checked it with a fresh razor blade.


Update Edit with CL Ultra spread evenly on die and on IHS underside. CL ultra is also between IHS and H100i.

-20*C Reduction in temps. Officially works great now.
 
Last edited:
Joined
Oct 21, 2005
Messages
6,874 (1.02/day)
Location
USA
System Name Computer of Theseus
Processor Intel i9-12900KS: 50x Pcore multi @ 1.18Vcore (target 1.275V -100mv offset)
Motherboard EVGA Z690 Classified
Cooling Noctua NH-D15S, 2xThermalRight TY-143, 4xNoctua NF-A12x25,3xNF-A12x15, 2xAquacomputer Splitty9Active
Memory G-Skill Trident Z5 (32GB) DDR5-6000 C36 F5-6000J3636F16GX2-TZ5RK
Video Card(s) EVGA Geforce 3060 XC Black Gaming 12GB
Storage 1x Samsung 970 Pro 512GB NVMe (OS), 2x Samsung 970 Evo Plus 2TB (data 1 and 2), ASUS BW-16D1HT
Display(s) Dell S3220DGF 32" 2560x1440 165Hz Primary, Dell P2017H 19.5" 1600x900 Secondary, Ergotron LX arms.
Case Lian Li O11 Air Mini
Audio Device(s) Audiotechnica ATR2100X-USB, El Gato Wave XLR Mic Preamp, ATH M50X Headphones, Behringer 302USB Mixer
Power Supply Super Flower Leadex Platinum SE 1000W 80+ Platinum White
Mouse Zowie EC3-C
Keyboard Vortex Multix 87 Winter TKL (Gateron G Pro Yellow)
Software Win 10 LTSC 21H2
Joined
Apr 4, 2008
Messages
4,686 (0.80/day)
System Name Obelisc
Processor i7 3770k @ 4.8 GHz
Motherboard Asus P8Z77-V
Cooling H110
Memory 16GB(4x4) @ 2400 MHz 9-11-11-31
Video Card(s) GTX 780 Ti
Storage 850 EVO 1TB, 2x 5TB Toshiba
Case T81
Audio Device(s) X-Fi Titanium HD
Power Supply EVGA 850 T2 80+ TITANIUM
Software Win10 64bit
My first suggestion would be to try another paste.
 
Joined
Jun 16, 2009
Messages
5,123 (0.95/day)
Location
North of Germany
System Name Nexus PC
Processor Intel Xeon E3-1231 v3, 3600 MHz
Motherboard Gigabyte GA-H97-HD3
Cooling Thermalright Macho V2
Memory 24GB DDR3, 1400MHZ CL8
Video Card(s) Sapphire Radeon R9 290
Storage Samsung EVO 960 250gb, EVO 850 250gb, Vertex 3 128gb. 2 TB of Rotational.
Display(s) 1xAsus MX299, 2x Asus MX239, Oculus Rift CV1
Case Sunflower Tower
Audio Device(s) C-Media CMI8738/C3DX
Power Supply Corsair TX850
Mouse Cyborg R.A.T. 7
Software Win7 64Bit Ultimate
drop the IHS completely and use some decent ceramic type tim, MX-2 regarding price performance.
 

newtekie1

Semi-Retired Folder
Joined
Nov 22, 2005
Messages
28,472 (4.25/day)
Location
Indiana, USA
Processor Intel Core i7 10850K@5.2GHz
Motherboard AsRock Z470 Taichi
Cooling Corsair H115i Pro w/ Noctua NF-A14 Fans
Memory 32GB DDR4-3600
Video Card(s) RTX 2070 Super
Storage 500GB SX8200 Pro + 8TB with 1TB SSD Cache
Display(s) Acer Nitro VG280K 4K 28"
Case Fractal Design Define S
Audio Device(s) Onboard is good enough for me
Power Supply eVGA SuperNOVA 1000w G3
Software Windows 10 Pro x64
Maybe it is just me, but it seems like you are using way to much thermal paste between the lid and the die. You shouldn't have to put past on the die and lid. Just put a small amount in the center of the die and put the lid on, let the pressure from the socket retention mechanism spread out the past from there.
 
Joined
Apr 8, 2009
Messages
3,016 (0.55/day)
Location
vermont
System Name The wifes worst enemy
Processor i5-9600k
Motherboard Asrock z390 phantom gaming 4
Cooling water
Memory 16gb G.skill ripjaw DDR4 2400 4X4GB 15-15-15-35-2T
Video Card(s) Asrock 5600xt phantom gaming 6gb 14gb/s
Storage crucial M500 120GB SSD, Pny 256GB SSD, seagate 750GB, seagate 2TB HDD, WD blue 1TB 2.5" HDD
Display(s) 27 inch samsung @ 1080p but capable of much more ;)
Case Corsair AIR 540 Cube Mid tower
Audio Device(s) onboard
Power Supply EVGA GQ1000W MODULAR
Mouse generic for now
Keyboard generic for now
Software gotta love steam, origin etc etc
Benchmark Scores http://hwbot.org/user/philbrown_23/
Why delid if you are gonna put the lid back on? remove that lid and socket ret. and use it delided temps should be a lot better then what they are.
 

newtekie1

Semi-Retired Folder
Joined
Nov 22, 2005
Messages
28,472 (4.25/day)
Location
Indiana, USA
Processor Intel Core i7 10850K@5.2GHz
Motherboard AsRock Z470 Taichi
Cooling Corsair H115i Pro w/ Noctua NF-A14 Fans
Memory 32GB DDR4-3600
Video Card(s) RTX 2070 Super
Storage 500GB SX8200 Pro + 8TB with 1TB SSD Cache
Display(s) Acer Nitro VG280K 4K 28"
Case Fractal Design Define S
Audio Device(s) Onboard is good enough for me
Power Supply eVGA SuperNOVA 1000w G3
Software Windows 10 Pro x64
Why delid if you are gonna put the lid back on? remove that lid and socket ret. and use it delided temps should be a lot better then what they are.

With IvyBridge chips a lot of people de-lid to replace the thermal paste under the lid because Intel did a crap job at applying it and temps are higher than they should be.
 
Joined
Jun 16, 2009
Messages
5,123 (0.95/day)
Location
North of Germany
System Name Nexus PC
Processor Intel Xeon E3-1231 v3, 3600 MHz
Motherboard Gigabyte GA-H97-HD3
Cooling Thermalright Macho V2
Memory 24GB DDR3, 1400MHZ CL8
Video Card(s) Sapphire Radeon R9 290
Storage Samsung EVO 960 250gb, EVO 850 250gb, Vertex 3 128gb. 2 TB of Rotational.
Display(s) 1xAsus MX299, 2x Asus MX239, Oculus Rift CV1
Case Sunflower Tower
Audio Device(s) C-Media CMI8738/C3DX
Power Supply Corsair TX850
Mouse Cyborg R.A.T. 7
Software Win7 64Bit Ultimate
meh....pure die is the way to go if possible:p
 
Joined
Aug 13, 2009
Messages
3,187 (0.60/day)
Location
Czech republic
Processor Ryzen 5800X
Motherboard Asus TUF-Gaming B550-Plus
Cooling Noctua NH-U14S
Memory 32GB G.Skill Trident Z Neo F4-3600C16D-32GTZNC
Video Card(s) Sapphire Radeon Rx 580 Nitro+ 8GB
Storage HP EX950 512GB + Samsung 970 PRO 1TB
Display(s) HP Z Display Z24i G2
Case Fractal Design Define R6 Black
Audio Device(s) Creative Sound Blaster AE-5
Power Supply Seasonic PRIME Ultra 650W Gold
Mouse Roccat Kone AIMO Remastered
Software Windows 10 x64
The main problem is - according to a guy over at Anandtech forums - a gap between the die and the lid. NOT the paste Intel used (his tests even suggest it's a very good one), and neither how is it applied. I can dig out a link if anyone is interested.
 
Joined
Apr 4, 2008
Messages
4,686 (0.80/day)
System Name Obelisc
Processor i7 3770k @ 4.8 GHz
Motherboard Asus P8Z77-V
Cooling H110
Memory 16GB(4x4) @ 2400 MHz 9-11-11-31
Video Card(s) GTX 780 Ti
Storage 850 EVO 1TB, 2x 5TB Toshiba
Case T81
Audio Device(s) X-Fi Titanium HD
Power Supply EVGA 850 T2 80+ TITANIUM
Software Win10 64bit
Well that sounds all nice and revelationy but haven't countless people had dramatic temperature improvements by simply changing the paste? That would seem to be a strong indicator of the problem.
 
Joined
Aug 13, 2009
Messages
3,187 (0.60/day)
Location
Czech republic
Processor Ryzen 5800X
Motherboard Asus TUF-Gaming B550-Plus
Cooling Noctua NH-U14S
Memory 32GB G.Skill Trident Z Neo F4-3600C16D-32GTZNC
Video Card(s) Sapphire Radeon Rx 580 Nitro+ 8GB
Storage HP EX950 512GB + Samsung 970 PRO 1TB
Display(s) HP Z Display Z24i G2
Case Fractal Design Define R6 Black
Audio Device(s) Creative Sound Blaster AE-5
Power Supply Seasonic PRIME Ultra 650W Gold
Mouse Roccat Kone AIMO Remastered
Software Windows 10 x64
Not all CPUs are the same and the gap might differ slightly. Besides, it depends how people delidded their CPUs. Did they remove all the black shit that kept IHS in place or not?

http://forums.anandtech.com/showthread.php?t=2261855
Give it a read. Might help you out.
 
Joined
Dec 14, 2006
Messages
536 (0.08/day)
System Name Ed-PC
Processor Intel i5-12600k
Motherboard Asus TUF Z690 PLUS Wifi D4
Cooling Noctua NH-14S
Memory Crucial Ballistix DDR4 C16@3600 16GB
Video Card(s) Nvidia MSI 970
Storage Samsung 980, 860evo
Case Lian Li Lancool II mesh Perf
Audio Device(s) onboard
Power Supply Corsair RM750x
Software Win10 Pro 64bit
Well that sounds all nice and revelationy but haven't countless people had dramatic temperature improvements by simply changing the paste? That would seem to be a strong indicator of the problem.

As noted above its not the paste directly but when you remove IHS you remove the black silicon sealant and gap should go down . So temps should go down .

Not all are same , some get like 20c reduction others only few .

Things I would check again is the flatness of underside of IHS and core, plus top side and HS/water block . Also with IHS just laying on core does it spin, rotate fine . that would say there no clearance issue .

With Delidding IMO if your temps were not bad for clock speed verse cooling used , might be better to leave it .

As for removing the IHS all together it depends on cooling, if its water block then to can play with standoff heights fairly easy to get block to site on chip cause the hold down bracket will get in the way as core face will be low .
 

newtekie1

Semi-Retired Folder
Joined
Nov 22, 2005
Messages
28,472 (4.25/day)
Location
Indiana, USA
Processor Intel Core i7 10850K@5.2GHz
Motherboard AsRock Z470 Taichi
Cooling Corsair H115i Pro w/ Noctua NF-A14 Fans
Memory 32GB DDR4-3600
Video Card(s) RTX 2070 Super
Storage 500GB SX8200 Pro + 8TB with 1TB SSD Cache
Display(s) Acer Nitro VG280K 4K 28"
Case Fractal Design Define S
Audio Device(s) Onboard is good enough for me
Power Supply eVGA SuperNOVA 1000w G3
Software Windows 10 Pro x64
Either way, gooping so much paste on it like the OP has done is probably going to lead to no improvement or maybe even worse temps. Just like always you want to use as thin of a layer as possible.
 
Joined
Aug 13, 2009
Messages
3,187 (0.60/day)
Location
Czech republic
Processor Ryzen 5800X
Motherboard Asus TUF-Gaming B550-Plus
Cooling Noctua NH-U14S
Memory 32GB G.Skill Trident Z Neo F4-3600C16D-32GTZNC
Video Card(s) Sapphire Radeon Rx 580 Nitro+ 8GB
Storage HP EX950 512GB + Samsung 970 PRO 1TB
Display(s) HP Z Display Z24i G2
Case Fractal Design Define R6 Black
Audio Device(s) Creative Sound Blaster AE-5
Power Supply Seasonic PRIME Ultra 650W Gold
Mouse Roccat Kone AIMO Remastered
Software Windows 10 x64
Joined
Apr 8, 2009
Messages
3,016 (0.55/day)
Location
vermont
System Name The wifes worst enemy
Processor i5-9600k
Motherboard Asrock z390 phantom gaming 4
Cooling water
Memory 16gb G.skill ripjaw DDR4 2400 4X4GB 15-15-15-35-2T
Video Card(s) Asrock 5600xt phantom gaming 6gb 14gb/s
Storage crucial M500 120GB SSD, Pny 256GB SSD, seagate 750GB, seagate 2TB HDD, WD blue 1TB 2.5" HDD
Display(s) 27 inch samsung @ 1080p but capable of much more ;)
Case Corsair AIR 540 Cube Mid tower
Audio Device(s) onboard
Power Supply EVGA GQ1000W MODULAR
Mouse generic for now
Keyboard generic for now
Software gotta love steam, origin etc etc
Benchmark Scores http://hwbot.org/user/philbrown_23/
crazy man, why would anybody void their warranty for a few c temp drop. me personally I would invest in phase change or something first. heck given the cost of some of those chips $300+ it would cost the same as a dead cpu to buy a phase unti or close to it anyways if you look hard enough. Dont get me wrong I did it, but that was for subzero on my old e8500 not to switch thermal paste. NOW on topic I would keep adjusting you lid till you get temps sounds like it probably just isnt seating just right.
 
Joined
Sep 15, 2009
Messages
2,076 (0.39/day)
System Name Omen
Processor i7-4710HQ
Cooling Dual fan/heatpipe
Memory 16GB
Video Card(s) 4GB GTX 860M
Storage 256GB PCIE SSD/256GB PNY UHS-1 SD Card
Display(s) 15.6' 1080P
Case Aluminium
Audio Device(s) Onboard
Power Supply Brick
Software Win 10
You'd think intel did it on purpose so people would buy their overclocking warranty :roll:
 

johnspack

Here For Good!
Joined
Oct 6, 2007
Messages
5,980 (0.99/day)
Location
Nelson B.C. Canada
System Name System2 Blacknet , System1 Blacknet2
Processor System2 Threadripper 1920x, System1 2699 v3
Motherboard System2 Asrock Fatality x399 Professional Gaming, System1 Asus X99-A
Cooling System2 Noctua NH-U14 TR4-SP3 Dual 140mm fans, System1 AIO
Memory System2 64GBS DDR4 3000, System1 32gbs DDR4 2400
Video Card(s) System2 GTX 980Ti System1 GTX 970
Storage System2 4x SSDs + NVme= 2.250TB 2xStorage Drives=8TB System1 3x SSDs=2TB
Display(s) 2x 24" 1080 displays
Case System2 Some Nzxt case with soundproofing...
Audio Device(s) Asus Xonar U7 MKII
Power Supply System2 EVGA 750 Watt, System1 XFX XTR 750 Watt
Mouse Logitech G900 Chaos Spectrum
Keyboard Ducky
Software Manjaro, Windows 10, Kubuntu 23.10
Benchmark Scores It's linux baby!
C'mon, direct to die!
 
Joined
Jan 4, 2011
Messages
170 (0.04/day)
I had the same lackluster results as you when I delided reapplied paste then put back on. So I decided to go D2D and got a 20 degree decrease in temps. Im currently at 5.0 with HT on 1.485V. My temps previously would have sky rocketed past 100 degrees before D2D.

 
Joined
Aug 13, 2009
Messages
3,187 (0.60/day)
Location
Czech republic
Processor Ryzen 5800X
Motherboard Asus TUF-Gaming B550-Plus
Cooling Noctua NH-U14S
Memory 32GB G.Skill Trident Z Neo F4-3600C16D-32GTZNC
Video Card(s) Sapphire Radeon Rx 580 Nitro+ 8GB
Storage HP EX950 512GB + Samsung 970 PRO 1TB
Display(s) HP Z Display Z24i G2
Case Fractal Design Define R6 Black
Audio Device(s) Creative Sound Blaster AE-5
Power Supply Seasonic PRIME Ultra 650W Gold
Mouse Roccat Kone AIMO Remastered
Software Windows 10 x64
Pro tip: download the latest Prime95 version. There were some bugs in past that affected testing.
 
Joined
Dec 14, 2006
Messages
536 (0.08/day)
System Name Ed-PC
Processor Intel i5-12600k
Motherboard Asus TUF Z690 PLUS Wifi D4
Cooling Noctua NH-14S
Memory Crucial Ballistix DDR4 C16@3600 16GB
Video Card(s) Nvidia MSI 970
Storage Samsung 980, 860evo
Case Lian Li Lancool II mesh Perf
Audio Device(s) onboard
Power Supply Corsair RM750x
Software Win10 Pro 64bit
Only issue I would recommend only using water cooled if direct contact to die . You don't want heavy tower HS levering on die IMO .
 
Joined
Oct 21, 2005
Messages
6,874 (1.02/day)
Location
USA
System Name Computer of Theseus
Processor Intel i9-12900KS: 50x Pcore multi @ 1.18Vcore (target 1.275V -100mv offset)
Motherboard EVGA Z690 Classified
Cooling Noctua NH-D15S, 2xThermalRight TY-143, 4xNoctua NF-A12x25,3xNF-A12x15, 2xAquacomputer Splitty9Active
Memory G-Skill Trident Z5 (32GB) DDR5-6000 C36 F5-6000J3636F16GX2-TZ5RK
Video Card(s) EVGA Geforce 3060 XC Black Gaming 12GB
Storage 1x Samsung 970 Pro 512GB NVMe (OS), 2x Samsung 970 Evo Plus 2TB (data 1 and 2), ASUS BW-16D1HT
Display(s) Dell S3220DGF 32" 2560x1440 165Hz Primary, Dell P2017H 19.5" 1600x900 Secondary, Ergotron LX arms.
Case Lian Li O11 Air Mini
Audio Device(s) Audiotechnica ATR2100X-USB, El Gato Wave XLR Mic Preamp, ATH M50X Headphones, Behringer 302USB Mixer
Power Supply Super Flower Leadex Platinum SE 1000W 80+ Platinum White
Mouse Zowie EC3-C
Keyboard Vortex Multix 87 Winter TKL (Gateron G Pro Yellow)
Software Win 10 LTSC 21H2
Okay guys I reapplied with CL Ultra. 24*C idle temp 50*C load temp. So a -20*C reduction in temperatures at load! For this I coated it, slathered it on. Hooray! It works!
 

de.das.dude

Pro Indian Modder
Joined
Jun 13, 2010
Messages
8,756 (1.74/day)
Location
Stuck in a PC. halp.
System Name Monke | Work Thinkpad| Old Monke
Processor Ryzen 5600X | Ryzen 5500U | FX8320
Motherboard ASRock B550 Extreme4 | ? | Asrock 990FX Extreme 4
Cooling 240mm Rad | Not needed | hyper 212 EVO
Memory 2x16GB DDR4 3600 Corsair RGB | 16 GB DDR4 3600 | 16GB DDR3 1600
Video Card(s) Sapphire Pulse RX6700XT 12GB | Vega 8 | Sapphire Pulse RX580 8GB
Storage Samsung 980 nvme (Primary) | some samsung SSD
Display(s) Dell 2723DS | Some 14" 1080p 98%sRGB IPS | Dell 2240L
Case Ant Esports Tempered case | Thinkpad | Antec
Audio Device(s) Logitech Z333 | Jabra corpo stuff
Power Supply Corsair RM750e | not needed | Corsair GS 600
Mouse Logitech G400 | nipple
Keyboard Logitech G213 | stock kb is awesome | Logitech K230
VR HMD ;_;
Software Windows 10 Professional x3
Benchmark Scores There are no marks on my bench
pretty sure you are applying tim in the wrong way.


try direct to heatsink if your heatsink has a mirror finish.

also did you clean it properly with rubbing alcohol.
 
Top