1. Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

i7 920 Overclocking. "C1" Pause & "b8" kinda error

Discussion in 'Overclocking & Cooling' started by fang_laluna, Jun 20, 2010.

  1. fang_laluna New Member

    Joined:
    Sep 5, 2009
    Messages:
    108 (0.04/day)
    Thanks Received:
    4
    Prime 95 stable for 5 hours.
    LinX + OCCT stable

    Memtest pass 5 times.

    [​IMG]

    BCLK = 191
    Multiplier = 21
    ram multiplier = 10

    CPU clock ratio = 20x
    Intel Turbo Boost = Enabled
    CPU Cores enabled = All
    Multi-Threading = Enabled
    CPU enhanced halt (C1E) = Disabled
    C3/C6/C7 State Support = Disabled
    CPU thermal monitor = Disabled
    CPU EIST Function = Disabled
    Bi directional PROCHOT = Disabled
    Virtualization Tech = Disabled

    ICH Core = 1.200v

    QPI Clock = x36
    Uncore Clock = x20
    Isochronous support = Enabled

    CPU Clock Drive = 800mV
    PCI Express Clock Drive = 700mV
    CPU Clock skew = 300ps
    IOH Clock skew = 0ps

    ACPI Suspend Type = S1(POS)
    HPET Mode = 64-bit mode

    After shut down + boot up.
    LED thingy always pause @ C1 for a while, proceed to C3 then back to C1. :confused: It wasn't like this with my old ram.

    Often the LED gives b8, or 6B or 68 message.

    BIOS F12
     

Currently Active Users Viewing This Thread: 1 (0 members and 1 guest)