- Joined
- May 19, 2012
- Messages
- 168 (0.04/day)
System Name | i7 960 FX8120 i5 3470 |
---|---|
Processor | i7 960 FX8120 i5 3470 |
Motherboard | ga x58a FX990gd65 770gd45 |
Cooling | APSALUS2-90 water cooled APSALUS2-90 water cooled stokfan |
Memory | Team 1600 8gbx6 patriot 1600 4gb x4 team 1600 8gbx4 |
Video Card(s) | winfast gf 560 HIS ati6850CF R9 280 3GB |
Storage | 7200rmp 1gb 7200rmp 1gb 7200rmp 2gb |
Display(s) | 21 24 42" 3d tv |
Case | cooler master gigabyte tusmi |
Power Supply | cooler master 500w cooler master 500w enhance 600 |
Software | win 7 64 win 7 64 win 7 64 |
my system was build last year, i7 960 stock speed stock fan, on gigabyte x58, it used to have only 12gb of ram, I just upgraded the ram this year to 24gb with all same 1600 4gb patriot memory. I saw many people use OCCT to stress test the system, so it is my first time running it. i7 can go up to 80 c in 3 mins, I wonder is that because i set the ram speed to 1600? since i7 only support ddr3 800 or 1066, but the gigabyte x58 support up to 1866.
note that mem86+ can pass for 10 times with no errors for memory.
I checked the stock fan and re applied the sliver paste, same result, 80 c in 3 or 4 mins.
now, I just installed a new APSALUS2-90 water cool build by asetek model 545L, my temp is still high for OCCT around 80 c in 5 mins. I wonder what should I do?
cpu volt from 0.8-1.2
memory volt at 1.52
the system can run any game(e.g. BF3, Batman2, etc) at full setting ok, temp never go over 65c. but i need it to work on some heavy load progarm, sometime it will go around 80 c if the work load is very heavy, thus the cpu is 100 load almost all the time.
Thank you very much for any suggestions
note that mem86+ can pass for 10 times with no errors for memory.
I checked the stock fan and re applied the sliver paste, same result, 80 c in 3 or 4 mins.
now, I just installed a new APSALUS2-90 water cool build by asetek model 545L, my temp is still high for OCCT around 80 c in 5 mins. I wonder what should I do?
cpu volt from 0.8-1.2
memory volt at 1.52
the system can run any game(e.g. BF3, Batman2, etc) at full setting ok, temp never go over 65c. but i need it to work on some heavy load progarm, sometime it will go around 80 c if the work load is very heavy, thus the cpu is 100 load almost all the time.
Thank you very much for any suggestions