• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Infinity RS4000A rescue.

AsRock

TPU addict
Joined
Jun 23, 2007
Messages
15,809 (3.77/day)
Likes
5,129
Location
UK\US
Processor 2500k \ 3770k
Motherboard ASRock Z68 \ Z77
Memory Samsung low profile 1600
Video Card(s) eVga GTX1060 SSC \ XFX R9 390X
Storage Intel 80Gb (SATA2) WD 250Gb \ Team SSD+Samsung Evo 250Gb+500Gb+ 2xCorsair Force+WD250GbHDD
Display(s) Samsung 1080P \ Toshiba HDTV 1080P
Case HTPC400 \ Thermaltake Armor case ( original ), With Zalman fan controller ( wattage usage ).
Audio Device(s) Yamaha RX-A820 \ Yamaha CX-830+Yamaha MX630 Tannoy Mercury MKII Paradigm 5SE + Tannoy Mercury F4
Power Supply PC&Power 750w \ Seasonic 750w MKII
Mouse MS intelimouse \ Logitech G700s + Steelseries Sensei wireless
Keyboard Logitech K120 \ ROCCAT MK Pro ( modded amber leds )
Benchmark Scores Meh benchmarks.
#1
Well picked these up some time ago, how ever finding they needed some TLC.

Ended up requiring

Re foaming after some body badly re-foamed them, had coil catching at high volumes.
Cleaning, cones are about as clean as i can get them
One of the boxes resealing due to bad shipping splitting the corner of one of the cabs ( need some thoughts on this ).

Pretty much done every thing that's been needed, i used super glue to seal the leaks from the split cabinet but wanted to take a little further by smoothing the outside with some filler.

Needs doing.

Removing the broken\loose particle board and replacing it, was thinking saw dust and glue although is some one knows some thing better let me know please.

All so thinking of recovering them too, Although i am after some good Vinyl Wrap, so if you know any were let me know.

Re-spaying the screws

Well here's some pictures.








Other threads
https://www.techpowerup.com/forums/threads/tannoy-mercury-mkii-revival.228159/#post-3726055
https://www.techpowerup.com/forums/threads/paradigm-5se-alterations.227929/
 
Last edited:
Top